Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).Features: Bunk-board kit lets you create 2 guide-ons to support your boat and keep it centered while you're loading it onto your trailer 2x4 Lumber for bunk boards not included 90-Degree-angled tubes let you mount the bunks close to your boat Great for narrow boats Bolt-on installation - clamp onto top or bottom of your trailer's frame Pre-galvanized steel construction is sturdy and corrosion-resistant Marine-grade carpeting lines bunk boards to protect your boat's finish 2 Rolls included to cover 2 boards U-bolts, brackets, and mounting hardware included Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/2" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) are required to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Carpeting dimensions (per roll): 11" wide x 12' long Maximum 2x4 length for carpeting: 69" Pre-Galvanized Steel Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extend out of the water to help you center your boat while loading Assist you in backing your trailer down the boat ramp 16-Gauge, pre-galvanized steel posts are strong and durable White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Adjusts out to 13" from trailer Made in the USA Specs: Quantity: 2 boat guide-ons Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Steel post diameter: 1-1/2" PVC post diameter: 2-3/8" Overall height: 40" Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extend out of the water to help you center your boat while loading Assist you in backing your trailer down the boat ramp 16-Gauge, pre-galvanized steel posts are strong and durable White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Adjusts out to 19" from trailer Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 60" Steel post dimensions: 39-7/8" tall x 1-1/2" wide PVC Pipe diameter: 2-3/8" Quantity: 2 boat guide-ons Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They clamp to the rear of your I-beam trailer frame and extend out of the water, providing visual targets to center the boat between during loading.Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extend out of the water to help you center your boat while loading Assist you in backing your trailer down the boat ramp 1-1/2" Diameter, 16-gauge, pre-galvanized steel tubes mount to trailer frame 2" PVC pipe slides over steel posts Simple installation on rear crossmember of I-beam trailer frame with included I-beam clamps - no drilling required Adjusts out to 19" from trailer Made in the USA Specs: Quantity: 2 boat guide-ons Post height: 75" Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
These guide-on posts make it easy to load your pontoon boat onto your trailer. They attach to the rear of your trailer and extend out of the water, providing a visual target to center the boat's pontoons around. ... The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extend out of the water to help you center your boat while loading Assist you in backing your trailer down the boat ramp 16-Gauge, pre-galvanized steel posts are strong and durable Black PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Adjusts out to 13" from trailer Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 60" Steel post dimensions: 38" tall x 1-1/2" diameter PVC Pipe diameter: 2-3/8" Quantity: 2 boat guide-ons Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extend out of the water to help you center your boat while loading Assist you in backing your trailer down the boat ramp 16-Gauge, pre-galvanized steel posts are strong and durable Black PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Adjusts out to 13" from trailer Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC Pipe diameter: 2-3/8" Quantity: 2 boat guide-ons Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach with U-bolts to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Slide the PVC posts over the galvanized steel support posts. Then use the included U-bolt hardware to mount the posts on the top or below the trailer frame, as close to the rear corners as possible.
Galvanized steel guide-on posts keep your trailer in view when reversing down a boat ramp. Posts also provide markers on your trailer so you keep your boat centered when loading or unloading it. ... Features: Guideposts provide a visual indicator on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Keeps your trailer in sight when backing it down a boat ramp 11-Gauge, galvanized steel posts are strong and corrosion resistant White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included U-bolt hardware - no drilling required Posts can be adjusted up to 19" away from your trailer Made in the USA Specs: Application: trailer frames up to 3-1/2" wide x 5-1/4" tall Overall height: 65" PVC pipe diameter: 2-3/8" Quantity: 2 boat guide-ons Guide Your Boat Into and Out of the Water When your boat trailer has been backed down the ramp and is partially submerged, these 65" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between them correctly matches the width of your boat.
These guide-on posts help you confidently load your boat onto your trailer and back your trailer down the ramp, tilting up to 70 degrees to accomodate your boat's wider hull. ... Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Assists you in backing your trailer down the boat ramp 70-Degree tilt accomodates your boat's wider hull 16-Gauge, pre-galvanized steel posts are strong and durable White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC pipe diameter: 2-3/8" Bend angle: 70 degrees Quantity: 2 boat guide-ons
Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between them correctly matches the width of your boat.
Aluminum guide-on posts keep your trailer in view when reversing down a boat ramp. Posts also provide markers so you keep your boat centered when loading or unloading it. ... The PVC posts also provide a visual aid to help you back your boat trailer down the ramp when you're unloading your boat. Installation To install the guide-ons, slide the PVC posts over the aluminum support posts.
... Install guide-on posts above or below the I-beams on your trailer frame.Specs: Application: I-beam trailer frames up to 4" wide Overall height: 60" Steel post dimensions: 39" tall x 1-1/2" wide PVC pipe diameter: 2-3/8" Quantity: 2 boat guide-ons Features: Guideposts provide a visual indicator on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Keeps your trailer in sight when backing it down a boat ramp 16-Gauge, pre-galvanized steel posts are strong and durable White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on I-beam trailer frames with included hardware - no drilling required Clamps can be attached above or below I-beam Posts can be adjusted up to 19" away from your trailer Made in the USA Guide Your Boat Into and Out of the Water When your boat trailer has been backed down the ramp and is partially submerged, these 60" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between when loading.
These guide-on posts help you confidently load your boat onto your trailer and back your trailer down the ramp, tilting up to 70 degrees to accomodate your boat's wider hull. ... Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Assists you in backing your trailer down the boat ramp 70-Degree tilt accomodates your boat's wider hull 16-Gauge, pre-galvanized steel posts are strong and durable Black PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC pipe diameter: 2-3/8" Bend angle: 70 degrees Quantity: 2 boat guide-ons
Get better visibility for launching and loading your boat with these post extensions. Slide extensions into the top of your existing bunk-style guide-ons and secure with included hardware. Adjustable posts give you up to 37" of added height.Easy Installation with Included Hardware You don't have to be a boating expert to install these post extensions for bunk-style guide-ons. All you need is some tools, a friend, and a little bit of patience. Remove the bunk from your existing guide-on - the rest of the guide-on can remain on your boat trailer Slide the PVC pipe onto the top of the steel upright Slide the assembled post extension into the opening of the guide-on After you've slid the post into the opening, you'll need to choose how tall you want your guideposts.
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. Fits trailer frames up to 3" wide x 4-1/4" tall. ... The galvanized steel support posts mount on top of the crossmember on your pontoon boat trailer's frame. Just slide the posts into the mounting brackets and secure the posts so that the distance between each bunk and pontoon is approximately 2" to 3".
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. They fit trailer frames up to 3" wide x 4-1/4" tall.The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the rollers correctly matches the width of your boat.
Easily load your pontoon boat with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with endcaps. They fit trailer frames up to 3" wide x 4-1/4" tall. ... The galvanized steel support posts mount on top of the crossmember on your pontoon boat trailer's frame. Just slide the posts into the mounting brackets and secure the posts so that the distance between each bunk and pontoon is approximately 2" to 3".
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Use this bracket to mount a tail light on your boat trailer's post-style guide-on. Keeps light out of the water and away from your boat. Pre-galvanized steel resists corrosion. Mounting hardware included.Features: Sturdy bracket provides mounting point for 1 tail light (sold separately) on your boat trailer's post-style guide-on Extends light 7-1/2" away from your trailer Keeps light out of the water to prevent damage while loading or unloading your boat 12-Gauge, pre-galvanized steel construction resists corrosion Simple installation Drill holes and bolt bracket onto guide-on Easily attach your surface-mount tail light onto the bracket Mounting hardware included Made in the USA Specs: Application: surface-mount tail lights Fits 2" diameter guide-on post Quantity: 1 bracket Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
Replaces the 90-degree post for your CE Smith post-style boat trailerguide-ons (27635, 27637, or 27638).Features: Replaces the 90-degree post for your CE Smith post-style boat trailerguide-ons (27635, 27637, or 27638) Fits: CE Smith post-style boat trailerguide-ons: 27635, 27637, and 27638
Zinc-plated steel U-bolt kit allows you to attach roller-, bunk-, or post-style guide-ons to your boat trailer with a frame up to 3" wide x 5-1/4" tall. Includes 2 sets of mounting U-bolts.Features: Extra-long U-bolts secures a bunk-style, roller-style or post-style guide-on to your boat trailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware is sold separately (8) 3/8"-16 Lock nuts (8) 3/8" Washers Includes 2 sets of mounting U-bolts Made in the USA Specs: Fits: trailer frames up to 3" wide x 5-1/4" tall Length: 6" Length of threads: 2-3/8" Bolt diameter: 3/8" Quantity: 2 sets (4 U-bolts)
Filters
