Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
A Reese Revolution and a Sidewinder Pin Box are essentially the same thing. It is simply called a Revolution when it comes as OEM/factory equipment on a trailer. The aftermarket product is called the Sidewinder. There are some very minor differences…
view full answer...When installing the pivot arms on your B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000lbs Item #BWRVK3600 you'll want to ensure that you have 6" of clearance between the bed rails and the nose of your…
view full answer...The length of a fender is measured from the longest point, at the very bottom of each end across. Then the height is measured from the tallest point, right in the center. For example, the CE Smith Single Axle Trailer Fender #CE17720 is 22-1/2"…
view full answer...Hey Connor, A typical sliding 5th wheel hitch is going to give you 12-14" of travel for extra turning clearance while a rotating pin box like the Reese Sidewinder will move the pivot point of the trailer back 22". Rotating pin boxes give…
view full answer...I have a suspicion on what the issue could be. There is a good chance that the 5th wheel hitch and wedge are not compatible with the Sidewinder. It at all comes down to what Sidewinder you have. If your Sidewinder is the more current model (68220),…
view full answer...5th wheel wedge #C16992 is the correct one for your Curt A16 hitch to allow use of a Revolution pivoting pin box. Since one of the two bolts sheared off it sounds like the initial installation left one of the bolts too loose (the one that did not…
view full answer...The Mopar 30k hitch you have is the A-Series and the 20k is the Q-Series. Since the A Series is compatible with the Sidewinders you'd just need the wedge part #C16992. Or if you have the second gen Sidewinder like part 69220 or 69220 you'd…
view full answer...The Curt A16 Fifth Wheel Hitch #C16120 will work well with your Reese Revolution pin box. The wedge you'd then want for the Revolution that's designed for this hitch is the part #C16992. With this setup you would have great turning…
view full answer...A Sidewinder and a Revolution are the same thing. It is called a Revolution when it comes as OEM equipment on a trailer. There are some design differences as well in terms of how each attaches to the trailer. Those are the only differences. To…
view full answer...Hey Denny! We can definitely help you out with that rough ride on your trailer. A pretty standard option is an upgraded equalizer like the MORryde you looked at. The best choice is always going to be the one that matches your current equalizer…
view full answer...I do have an option for you but the Curt A-Series 5th Wheel Trailer Hitches like part #C16140 are only compatible with the first generation Reese Sidewinder 5th Wheel King Pins, not the second generation Reese Sidewinder 5th Wheel King Pin because…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...