Video Transcript for The Low-Down on the Rubber Hollow Bulb Seal for RV Slide Out

Hi everybody, Andy here with etrailer.com and today we're gonna take a look at this etrailer press on rubber hollow bulb seal for your RV slide out. With this push on rubber seal, you are going to be able to replace your old or worn out bulb seal on your RV slide out before water damage creates a costly headache for you. This flexible steel core is going to help this seal maintain its grip in round corners and it is completely encased in rubber to prevent rust formation. Now this is going to be an easy installation. You're just going to press this lip seal onto the one quarter of an inch thick flange on your RV slide out. You may have to use a mallet to tap the seal into place and then you're just going to use scissors to trim any extra seal that you do not need.

Now this is made here in the USA of EPDM rubber that won't shrink, crack or fade over time. This is also resistant to UV damage. Let me go ahead and pull my ruler out here and just give you some overall measurements so you can be confident that this is going to work for you. So looking at the overall width first, lining that up as best as I can. We are sitting right at about one and five sixteenths inches wide.

And then the overall height, we are sitting right at an inch tall. And then the height of just the bulb itself in case you need that measurement. We're sitting right at three quarters of an inch tall on that, on just the bulb. Now what I have here on my table is a 15 foot bundle. We also carry this in 25 foot and 50 foot.

So on your screen I am including our item numbers for those different lengths and whichever length is going to work best for your application, you can just take that item number, put it in the search field of our website and it will take you to that length that you are looking for. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.

.