These clamps enable you to mount 1-1/2" square tubing on the top or bottom of an I-beam on your boat trailer or a boat lift. Its galvanized steel construction resists rust and corrosion.Features: Heavy-duty clamps secure 1-1/2" square tubing to an I-beam 2 Sets are required for each I-beam - 1 clamp per end Galvanized steel construction is sturdy and resists corrosion Made in
Four of these clamps enable you to mount 1-1/2" square tubing on the top or bottom of an I-beam on your aluminum boat trailer or a boat lift. Its galvanized steel construction resists corrosion.Features: Heavy-duty clamp secures 1-1/2" square tubing to an I-beam 4 Clamps (each sold separately) are required for (1) I-beam Galvanized steel construction is sturdy and resists corrosion
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They clamp to the rear of your I-beam trailer frame and extend out of the water, providing visual ... trailer down the boat ramp 1-1/2" Diameter, 16-gauge, pre-galvanized steel tubes mount to trailer frame 2" PVC pipe slides over steel posts Simple installation on rear crossmember of I-beam
... posts above or below the I-beams on your trailer frame.Specs: Application: I-beam trailer frames up to 4" wide Overall height: 60" Steel post dimensions: 39" tall x 1-1/2" wide PVC pipe diameter: 2-3/8" Quantity: 2 boat guide-ons
If every step rattles the dishes or settling into your chair rocks the camper, it's time for more stability. With the I-Beam Stabilizer, everything settles down and you get that firm, planted ... stable support on uneven ground. No Drilling or Welding: Brackets slide onto the outer lip of your I-beams for fast install. Ratchet Strap Keeps Your Trailer Planted: Tightening the strap pulls arms in and
... trailer's I-beams. Great for saltwater use. directly to your trailer's I-beam Posts can be adjusted up to 19" away from your trailer Drilling is required Made in the USA Specs: Application: I-beam trailer frames Overall height: 65" PVC
Guides
Post-Style Guide
65 Inch Tall
CE Smith
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
Replacement I-beam jack bracket for Lippert Ground Control 3.0 (LC358590 and LC675817). Includes 1 mounting bracket.Features: Replacement I-beam jack bracket for Lippert Ground Control 3.0 (LC358590 and LC675817) Application: 8" and 10" I-beams Bolts and hardware sold separately Quantity: 1 mounting
Easily load your pontoon boat with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with endcaps. They fit trailer frames up to 3" wide x 4-1/4" tall. Hardware included. the top of your channel, box-beam, or I-beam trailer frame Mounting brackets allow you to adjust the distance between posts Galvanized steel construction is sturdy and resists corrosion Hardware
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. Fits trailer frames up to 3" wide x 4-1/4" tall. Hardware included. higher or lower along the posts Support posts clamp onto the top of your channel, box-beam, or I-beam trailer frame Mounting brackets allow you to adjust the distance between posts Galvanized steel
Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).: trailer frames up to 3" wide x 4-1/2" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) are required to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps
If your RV is already prepped for the Ground Control 3.0 system, this kit has everything you will need to automatically level and stabilize it, without unneeded, duplicate components. brackets that bolt onto 8", 10", or 12" I-beam frames with included hardware. Mounting the rear jacks does require drilling. A sensor is also included for the rear jacks. This will be mounted
Automatically level and stabilize your travel trailer with this electronic leveling system. 5 Precise, motorized jacks can be operated by the included control panel or via your smart device (if RV has Wi-Fi and factory-installed OneControl system). landing gear C-jacks mount to the existing points on your RV and secure with included hardware. The 2 rear jacks come with mounting brackets that bolt onto I-beam frames with included hardware. Mounting the
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 4 Precise, motorized jacks can be operated by either the included touchpad. Hitch recognition memory function offers simple hookup. hardware. The 2 rear jacks come with mounting brackets that bolt onto 8", 10", or 12" I-beam frames with included hardware. Mounting the rear jacks does require drilling. A sensor is also
Minimize chassis movement in your travel trailer with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear. travel trailers Bolts onto C-channel, I-beam, or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 6 Precise, motorized jacks can be operated by either the included touchpad or a Bluetooth compatible app on your smartphone. on your RV and secure with included hardware. The 4 rear jacks come with mounting brackets that bolt onto 8", 10", or 12" I-beam frames with included hardware. Mounting the rear jacks
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear. 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear. 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic
Filters
