4" Round waterproof LED trailer light with 24 diodes provides stop, turn, tail, and back-up functions. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). ... Features: Combination trailer light serves 4 functions Stop light, turn signal light, tail light, and reverse light GloLight lens creates a solid light pattern with a smooth appearance Sonically sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing and durable acrylic lens Red lens over red LEDs White lens over white leds for back-up function Compatible with 12V DC systems Recessed mount with required grommet (sold separately) Weathertight connections accept 3-pin and 2-pin plugs Specs: Dimensions: 4-5/16" diameter x 1-5/8" thick Diodes: 24 Power draw at 12V: Stop/turn light: 0.316 amps Tail light: 0.150 amps Backup: 0.30 amps Lifetime warranty on LEDS Innovative GloLight Design This red LED light serves as a trailer tail light with stop, turn, and tail functions.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". ... Each circuit board is sealed, which means that water will not damage the diodes or circuit board. CombinationLights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Waterproof housing and lens unit is submersible Great for marine trailer applications LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Universal mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL57RB Passenger side: STL56RB Light dimensions: 6-1/16" wide x 3-5/8" tall x 2-1/4" deep Number of diodes: Driver's side: 23 Passenger's side: 18 Power draw at 12.8 volts: Stop and turn lights: 0.268 amps Side marker lights: 0.059 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.Each circuit board is sealed, which means that water will not damage the diodes or circuit board. CombinationLights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
5-1/16" x 4-9/16" Square. Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, and side reflex. Durable plastic housing. Stud mount on 2" centers. 3-Wire design.Features: Square trailer light serves 6 functions Stop light, turn signal light, tail light, rear reflex reflector, side marker light, and side reflex reflector Built-in reflex reflector removes the need for a separate reflector Sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing and durable acrylic lens Red lens over white LEDs Stud mount with included hardware 3-Wire pigtail White wire is the ground Brown wire is for the tail lights Yellow wire is for the stop and turn lights Specs: Configuration: passenger's side Driver's side: STL9RB (sold separately) Dimensions: 5-1/16" wide x 4-9/16" tall x 2-5/8" deep Light face: 4-9/16" wide x 4-9/16" tall Distance between mounting studs (center on center): 2" Diodes: 11 Power draw at 12.8V: Stop light: 0.259 amps Side marker light: 0.062 amps Lifetime warranty on LEDS Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8" x 2-7/8" Rectangle. Low-profile trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Durable plastic housing and acrylic lens. 12 LEDs. ... Features: Low-profile trailer tail light serves 6 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, and rear reflex reflector Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable plastic housing Red lens over white LEDs Mounts on surface of trailer - hardware included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: passenger's side (right-hand side) Driver's-side light (STL15RB) sold separately Dimensions: 8" long x 2-7/8" tall x 2-13/16" deep Diodes: 12 Power draw at 12.8 volts: Stop/turn signal light: 0.252 amps Tail light: 0.135 amps Quantity: 1 Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-1/16" x 2-7/8" Rectangle. Waterproof incandescent light acts as brake, tail, turn, side marker, side reflector, rear clearance, and rear reflector for trailers over 80" wide. Stud mount - includes hardware.The circuit board is sealed, which means that water will not damage the diodes or circuit board. CombinationLights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
6-1/16" x 3-5/8" Rectangle. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. Mounts on surface of trailer - hardware included. 3-Wire pigtail.Features: Rectangular trailer tail light serves 7 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear reflex reflector, and license plate light Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Plastic housing Red and clear acrylic lenses Mounts on surface of trailer Hardware slides along rear channels so that you can adjust the position of the light Stainless steel hardware included 3-Wire pigtail White wire is for ground Brown wire is for the tail lights Yellow wire is for the stop and turn lights DOT compliant Specs: Configuration: driver's side (left-hand side) Passenger's-side light (STL56RB) sold separately Dimensions: 6-1/16" long x 3-5/8" tall x 2-1/4" deep Mounting hole dimensions (center to center): 2" Hardware size: 1/4-20 x 1" long Diodes: 23 Power draw at 12.8 volts: Stop/turn signal light: 0.268 amps Side marker light: 0.059 amps Quantity: 1 Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
20-1/2" x 1". 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. ... Features: Low-profile trailer tail light serves 4 functions on trailers over 80" wide Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Compatible with 12V DC systems Surface mounts to trailer - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light Black wire for tail light DOT compliant SAE compliant for trailers over 80" wide Specs: Overall dimensions: 20-1/2" long x 1" tall x 3/4" deep Number of diodes: 19 Power draw at 12.8 volts: Stop/turn signal light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Wire functions Black: tail light Red: stop/turn Yellow: backup White: ground Quantity: 1 light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8" x 2-7/8" Rectangle. Low-profile trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. Durable plastic housing and acrylic lens. ... Features: Low-profile trailer tail light serves 7 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear reflex reflector, and license plate light Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable plastic housing Red lens over white LEDs Mounts on surface of trailer - hardware included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: driver's side (left-hand side) Passenger's-side light (STL14RB) sold separately Dimensions: 8" long x 2-7/8" tall x 2-13/16" deep Diodes: 18 Power draw at 12.8 volts: Stop/turn signal light: 0.252 amps Tail light: 0.135 amps Quantity: 1 Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
6-1/8" x 4-9/16" Square. Waterproof LED tail light acts as brake, tail, turn, side marker, side reflector, rear clearance, and rear reflector for trailers over 80" wide. Stud mount - includes hardware. 3-Wire design. 18 Diodes.These clearance lights indicate the width of the trailer when it is viewed from the back. To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function.
4-1/2" x 5" Square. Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, side reflex, and license plate light. SMD LEDs for enhanced performance. ... Features: Square LED combination trailer tail light serves 7 functions Stop light, turn signal, tail light, rear reflector, side marker, and side reflector License plate light illuminates your trailers license plate Built-in reflex reflector removes the need for a separate reflector Sealed, waterproof construction is submersible Durable SMD construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing with acrylic lens Red lens over white LEDs Compatible with 12V DC electrical systems Stud mount - hardware included 3-Wire design hardwires to trailer DOT compliant Specs: Configuration: driver side Passenger side: STL38RB (sold separately) Dimensions: 4-1/2" tall x 5" wide x 2-1/2" thick Distance between mounting studs (center on center): 2" Diodes: 10 Power draw at 12.8V Stop/turn: 0.19 amps Marker: 0.065 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Sealed, waterproof construction is submersible Durable surface-mount diode (SMD) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Stud mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL39RB Passenger side: STL38RB Light dimensions: 5-1/16" long x 4-9/16" tall x 2-5/8" deep Light face: 4-9/16" x 4-9/16" Distance between mounting studs (center on center): 2" Diodes: Driver's side: 10 Passenger's side: 7 Power draw at 12.8 volts: Stop and turn lights: 0.259 amps Side marker lights: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
5" x 4-1/2" Square. Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, and side reflex. SMD LEDs for enhanced performance. Stud mount on 2" centers. 3-Wire design.Features: Square LED combination trailer tail light serves 6 functions Stop light, turn signal, tail light, rear reflector, side marker, and side reflector Built-in reflex reflector removes the need for a separate reflector Sealed, waterproof construction is submersible Durable SMD construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing with acrylic lens Red lens over white LEDs Compatible with 12V DC electrical systems Stud mount - hardware included 3-Wire design hardwires to trailer DOT compliant Specs: Configuration: passenger side Driver side: STL39RB (sold separately) Dimensions: 5" tall x 4-1/2" wide x 2-1/2" thick Light face: 4-1/2" tall x 4-1/2" wide Distance between mounting studs (center on center): 2" Diodes: 7 Power draw at 12.8V Stop/turn: 0.19 amps Marker: 0.065 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-1/16" x 2-7/8" Rectangle. Waterproof incandescent light acts as brake, tail, turn, side marker, side reflector, rear clearance, rear reflector, and license plate light for trailers over 80" wide. ... The circuit board is sealed, which means that water will not damage the diodes or circuit board. CombinationLights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
6-1/8" x 4-9/16" Square. Waterproof LED tail light acts as brake, tail, turn, side marker, side reflector, rear clearance, rear reflector, and license plate light for trailers over 80" wide. ... These clearance lights indicate the width of the trailer when it is viewed from the back. To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function.
5-15/16" Diameter round. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Durable plastic housing with acrylic lens. ... These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
8-13/16" x 5-1/16". Incandescent trailer light serves 4 functions: stop, turn, tail, and rear-reflex. Built-in reflector. Corrosion-resistant bulb sockets. Surface mount to trailer - hardware not included. 2-Wire design. (1) 1157 bulb.Features: Combination trailer tail light serves 4 functions Stop, turn, tail, and rear-reflex Great for enclosed trailers and RVs Built-in rear reflex reflector removes the need for a separate reflector Corrosion-resistant socket protects connection to ensure long-lasting function Incandescent bulb can be easily replaced Durable polycaronbate housing with polar white base Red lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Mounts in horizontal position 2-Wire design grounds to mounting hardware DOT compliant Made in the USA Specs: Configuration: passenger side Driver side: V457L (sold separately) Dimensions: 8-13/16" long x 5-1/16" tall x 2-3/4" thick Bulb type: 1157 Power draw at 12.8V: 2.2 amps 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
8-5/8" x 3-3/16" Rectangle. RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. ... Features: Rectangular RV tail light serves 4 functions Stop light, tail light, turn signal light, and license plate light Built-in license plate bracket allows easy mounting of license plate ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable ABS plastic base Red acrylic lens can be easily replaced Clear lens for license plate light Mounts on surface of trailer - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: driver's side (left-hand side) Passenger's-side light (RVSTLB0060) sold separately Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" deep Height with license plate bracket: 5" Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.34 amps Tail light: 0.094 amps Quantity: 1 Lifetime warranty on LEDs
20-1/2" x 1". 4-Function, waterproof light bar acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. ... Features: Low-profile trailer tail light serves 4 functions on trailers over 80" wide Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens with red and white LEDs Clear lens with red LEDs for tail light Clear lens with white LEDs for backup light Surface mounts to trailer - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light Black wire for tail light DOT compliant SAE compliant for trailers over 80" wide Specs: Overall dimensions: 20-1/2" long x 1" tall x 3/4" deep Distance between mounting holes (center on center): 19-5/8" Diodes: 19 Power draw at 12.8 volts: Stop/turn signal light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
17" x 1-3/8" x 1". Waterproof, 3-function trailer light serves as a stop, turn, and tail signal light when properly mounted. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-wire design.Features: Low-profile trailer light serves 3 functions Turn signal light Tail light Brake light Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mounted technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear lens over red LEDs Polycarbonate housing and lens Surface mount - hardware not included 3-Wire design Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-7/8" x 3-1/4". Low-profile incandescent light serves 7 functions: brake, tail, turn, side marker, side reflector, rear clearance, and rear reflector. Shock proof sockets protect bulbs. ... The circuit board is sealed, which means that water will not damage the diodes or circuit board. CombinationLights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
5-5/16" x 4-9/16" Square. Incandescent trailer tail light serves 6 functions on trailers under 80" wide: brake, tail, turn, side marker, side reflector, and rear reflector. Shock proof sockets. ... Features: Trailer tail light serves 6 functions on trailers less than 80" wide Stop, Turn, Tail, Rear Reflex, Side Marker, and Side Reflex Built-in reflex reflectors remove the need for a separate reflector Shock-proof socket protects the bulb Incandescent bulb can be easily replaced Red lens over 2 bulbs Durable polycarbonate housing and acrylic lens Stud mounts on trailer with included studs Quick connect wiring - simply insert stripped wire into holes for a secure connection Light grounds through mounting studs Specs: Configuration: passenger side Driver side: ST9RB (sold separately) Dimensions: 5-5/16" long x 4-9/16" wide x 2-7/8" deep Distance between mounting studs (center on center): 2" Power draw at 12.8V: Stop/turn: 2.5 amps Tail: 1 amp 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # TL4400 Wesbar # 3060 Graote # 52302 Peterson # 440
7-7/8" x 3-1/4". Low-profile incandescent light serves 8 functions: brake, tail, turn, side marker, side reflector, rear clearance, rear reflector, and license plate light. Shock proof sockets protect bulbs. ... The circuit board is sealed, which means that water will not damage the diodes or circuit board. CombinationLights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
Filters
