This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.Features: Custom-fit trailer hitch lets you tow a trailer or carry a bikerack or cargo carrier with your vehicle Hidden cross tube provides a clean, from-the-factory look Easy, bolt-on installation - no drilling or welding required Hardware is included Sturdy, lightweight alloy construction Alloy is made of recycled materials and combines aluminum, steel, and stainless steel Black powder coat finish offers superior rust protection Meets SAE J684 towing safety regulations Made in the USA Specs: Receiver opening: 2" x 2" Rating: Class III Maximum gross trailer weight : 5,000 lbs Maximum tongue weight : 750 lbs Not rated for weight distribution systems Limited lifetime warranty Hidden Cross Tube for a Clean, Factory Look The EcoHitch Hidden trailer hitch is designed to be as inconspicuous as possible.
We've handled a lot of racks and can confidently say the RV Rider is one of the few that can carry a couple 80-lb fat-tire e-bikes on the back of a motorhome or 5th wheel. It's sturdy, versatile, and a steal for the value it provides.It attaches to the top or bottom of the flange on your receiver using a U-bolt and clamp bar. Complete Security for Bikes and Rack The RV Rider comes with locks for both the rack and your bikes to deter theft.
Use this anti-rattle clamp to keep your hitch-mounted accessory from rattling and wobbling in your receiver. Great for tow bars, high-low adapters, bikeracks, cargo carriers, and more. Quick, simple bolt-on installation.Features: Anti-rattle clamp keeps hitch-mounted accessories stable and quiet Helps to reduce or eliminate wobble and sway within your hitch receiver Ideal for cargo carriers, bikeracks, and similar hitch-mounted accessories Effortless, bolt-on installation Place stabilizer plate over the top collar of your hitch receiver, making sure the bent portion rests on the shank of your accessory Insert the U-bolt from the bottom side, positioning it at the front of the collar Tighten nuts and washers, using included wrench Strong, durable steel construction with vinyl coating Black powder coated plate resists corrosion Application: 2" x 2" receivers Hitch receiver must have a ring or collar around it for U-bolt to attach Warning/Note: Not for use with receiver tube extentions.
Thru-axle fork mount bike rack lets you carry 1 bike on nearly any stable, flat surface. You can also use it on a Saris Traps Single or Triple Track. Fits 4 different thru-axle skewer sizes.Features: Fork-mount rack lets you carry 1 bike on nearly any stable, flat surface Mounts directly to your truck bed, truck bed rails, trailer bed, or the rear cargo area of your SUV or van Also bolts to Saris Traps Single or Triple Track Fits 12-mm x 100-mm, 15-mm x 100-mm, 15-mm x 110-mm Boost, and 20-mm x 110-mm Boost thru-axle skewers Installation requires drilling through mounting surface (mounting hardware not included) Black powder-coated aluminum construction resists corrosion Made in the USA Specs: Carrying capacity: 1 bicycle Limited lifetime warranty
Replaces (1) 12 x 40 mm hitch bolt for Thule Goalpost hitch-mounted load bar (TH997), or for Thule hitch-mounted bike carriers (TH956, TH957, TH958, TH9030, TH9029XT, and TH9031XT).Features: Replaces 1 hitch bolt Secures the shank of the Goalpost load bar or hitch mounted bikerack to your trailer hitch receiver Installs with a washer and a lock washer (956122159 and 951-1224-54 - sold separately) Specs: Application: Thule Goalpost hitch-mounted load bar (TH997) Thule Parkway bikeracks (TH956, TH957, and TH958) Thule Vertex 5 bikerack (TH9030) Thule Vertex 4 bikerack (TH9029XT) Thule Vertex Swing 4 bikerack (TH9031XT)
This fork-mount bikerack provides a mounting point for a bike with a Boost 110 thru-axle fork. It bolts to almost any flat surface and comes with drilling template - hardware not included.Features: Fork-mount bikerack carries 1 bike with a Boost 110 thru-axle front-wheel fork Accommodates bikes with standard or disc brakes Versatile fork block mounts to almost any flat surface, such as a truck bed, trailer, or cargo carrier Base has 2 holes for easy installation Hardware not included - 1/4" or 6 mm bolts or screws with washers and lock washers recommended Drilling template included Sturdy steel construction with rust-resistant black powder coat finish Specs: Carrying capacity: 1 bicycle Skewer sleeve dimensions: 15 mm x 110 mm Distance between mounting holes (center to center): 2-9/16" Lifetime warranty
BlockHead fork-style, single-bike carrier bolts anywhere along your truck bed rails, making it the most versatile bed mount by Yakima. The bike is secured by a locking skewer that engages with a quick-release lever for easy loading and unloading.
This heavy-duty, 2-bike rack is perfect for the serious cyclist and occasional riders. It's safe for carbon frames and has a foot pedal that lets you use both hands to tilt for trunk access and fold for storage.Secure the wheels in place with the built-in ratcheting strap. Strap extenders (sold separately) let you carry fat bikes. U-Shape Frame Most platform-style racks force you to reach out and over the rack to load your bikes or walk around to the back of the rack to access the bike closest to your vehicle.
Carry a spare tire for your truck, van, or SUV while still using your hitch for mounting accessories. The sturdy Roadmaster spare tire carrier holds all wheels with a lug nut circle up to 7", including dually and deep dish style.Features: Sturdy spare tire carrier holds a spare tire for your truck, van, or SUV 2" Receiver hitch allows you to simultaneously connect a tow bar, bikerack, or other hitch-mounted accessory Carrier designed to work with dually and deep dish offset style wheels Carrier pivots down to the ground for ease of use and access to rear compartments or engine Spring-loaded handle makes it easy to pivot carrier down and secure it back in place 2 Separate pin holes let you change the length of the shank Built-in safety cable connection tabs allow for quick hook-up and release Anti-rattle hitch pin secures carrier to RV's hitch and helps to eliminate rattle and play in the connection Black powder coated steel is durable and corrosion resistant Specs: Application: 2" x 2" trailer hitch receivers Maximum 10" spacing between rear of RV and hitch pin hole Fits 16" - 24-1/2" wheels Compatible with all wheel bolt hole patterns Receiver opening of carrier: 2" x 2" Maximum flat towing capacity: 10,000 lbs Maximum tongue weight : 400 lbs Overall dimensions: Extended: 70-1/2" tall from inside top edge of receiver tube on RV to top of handle Retracted: 42-1/2" tall from inside top edge of receiver tube on RV to top of handle Limited Lifetime Warranty Notes: This Roadmaster spare tire carrier is only to be used for flat towing a vehicle or carrying a hitch-mounted accessory, such as a bikerack or a cargo carrier.
This fork-mount block bolts onto almost any flat surface and provides a mounting point for 1 bike with a 9-mm quick-release skewer, a 12-mm thru-axle fork, or a 15-mm thru-axle fork. Supports bikes up to 45 lbs.Features: Fork-mount bikerack provides simple option for carrying 1 bike Versatile fork block works with bikes that have a 9-mm x 100-mm quick-release skewers and 12-mm x 100 mm or 15-mm x 110-mm thru-axle forks Accepts 20-mm thru-axle forks with an adapter tube (S64715 - sold separately) Accommodates bikes with standard brakes or disc brakes Can be used to carry an additional bike on your Swagman Patrol truck-bed bike carrier (S64701 - sold separately) Lightweight, durable aluminum construction is rustproof Easy installation to almost any flat surface with included hardware Includes anti-theft bolts and T-slot wedges for use with Swagman Patrol and other channel-mount applications Specs: Capacity: 1 bike Skewer diameter: 9 mm Weight capacity: 45 lbs Limited lifetime warranty
This fork-mount bikerack provides a mounting point for a bike with a 100 thru-axle fork. It bolts to almost any flat surface and comes with drilling template - hardware not included.Features: Fork-mount bikerack carries 1 bike with a 100-mm thru-axle front-wheel fork Accommodates bikes with standard or disc brakes Versatile fork block mounts to almost any flat surface, such as a truck bed, trailer, or cargo carrier Base has 2 holes for easy installation Hardware not included - 1/4" or 6 mm bolts or screws with washers and lock washers recommended Drilling template included Sturdy steel construction with rust-resistant black powder coat finish Specs: Carrying capacity: 1 bicycle Skewer sleeve dimensions: 12 mm x 100 mm Distance between mounting holes (center to center): 2-9/16" Lifetime warranty
This hitch extender converts your existing bike rack or hitch accessory into a swing-away rack. It rotates out 90 degrees to provide easy access to the rear of your vehicle. Fits 2" hitches and bike racks that hold up to 4 bikes. Lock included.Compatible with Most 2" Hitch Accessories This versatile hitch extender will work with most bikeracks or hitch accessories with a 2" shank. It works with both platform and hanging bikeracks, and it can support up to 4 bikes on either syle of rack.
Replaces the anti-rattle hitch bolt, washer, and clip for your Yakima HangOver bikerack.Features: Replaces the anti-rattle hitch bolt for your Yakima HangOver bikerack Works with Y02484 and Y02485 Includes hitch bolt, washer, and clip for securing the rack to your hitch receiver
Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). Pre-drilled to accept camper tie-downs.With 2 receivers, you can tow a trailer and carry a hitch-mounted bikerack or cargo carrier at the same time. And if you have a truck bed camper, this hitch has pre-drilled mounting points for TorkLift's super-sturdy camper tie-towns (sold separately).
Your e-bike matters, how you carry it should matter too. This rack holds your bike by the wheels, so you're not scuffing paint every time you load up. And it tilts, so you can grab snacks or gear from the trunk without taking your bike off.The cable lock wraps through your bikes' frame and the rack, and the locking pin secures the rack to your hitch. Both locks are keyed alike so you only need 1 key for the rack.
Modular enclosed cargo carrier swings away with gear loaded for cargo area access. Swap the cargo carrier for a bike rack or ski carrier without removing the base from your vehicle, or add a 2nd tier to carry 2 accessories (all sold separately).On a 2-tier system the bikerack will need to be installed on the top tier to have room to mount your bikes. Using the bikerack on the top level reduces its weight capacity to 40 lbs per bike.
This hitch bike rack makes it easy to take 2 standard or fat e-bikes to the trail. Ratcheting hooks hold bikes securely by the frame and lock to deter theft. Wheel hoops adjust for different wheelbases. Anti-rattle system reduces wobble and sway.Complete Security for Bikes and Rack The lock cores in the frame hooks hold the bike down on the rack and prevent them from moving. Also, the lock pod attaches to the hitch pin to secure the rack to your vehicle.
This lightweight, 1-bike rack is perfect for the serious cyclist as well as the occasional rider. It's safe for a carbon frame, and the foot pedal lets you use both hands to tilt the rack for trunk access and fold it up for storage.Front-Wheel Cradle with Adjustable Pitch In its upright position the front cradle sits at the optimal position for holding a normal-size bike. However, you can adjust the cradle so that a smaller bike sits more toward the center of the rack. To adjust the pitch, use the included Allen key to flip the bolt locator tab upside down.
This EXO system is perfect for your biking adventure. Bike rack secures your bikes by the wheels, and the enclosed cargo carrier detaches so you can carry your gear to the campsite in a single trip. System swings away to provide cargo area access.Lastly, because you can carry two accessories on the back of your vehicle, it frees up space on your roof to carry even more gear. Wheel-Mount BikeRack The DoubleUp bikerack has ratcheting hooks that grab your bikes firmly by the front wheel - not the frame. It's perfect for carrying nearly any bike, including bikes with carbon frames, disc brakes, thru axles, or full suspensions.
Pack the fun without cramping your car. This roof box is sized for the small stuff that makes a big difference - sleeping bags, camping gear, dirty boots - and still leaves room up top for your skis or bikes to come along for the ride.And unlike bulkier rooftop boxes that eat up your crossbar space, this box leaves room for a bikerack, ski carrier, or even a kayak. That's especially helpful if you've got a smaller vehicle or flush bars with no overhang.
This truck rack works with tonneau covers so you can haul your gear and keep your bed covered. Channels in the uprights and crossbars let you attach a variety of accessories. Adapters attach to your tonneau cover rails with included hardware.Features: Customizable truck rack works with your tonneau cover so you can haul your gear and keep your bed covered Works with Retrax XR, Pace Edwards UltraGroove, or Ford Embark LS tonneau covers Enjoy the benefits of a retractable tonneau cover without sacrificing the ability to have a truck rack Heavy-duty truck bed rack was designed and tested for both on- and off-road use Perfect for tradesman, backcountry explorers, and overlanding adventurers Adjustable uprights with T-slots allow you to customize the rack to your gear carrying needs Channels on inside and outside allow accessories like eye bolts or paddle holders to be mounted directly Rack height adjusts from 19" to 30" to match your load or gear carrying needs Versatile crossbars accommodate most Yakima channel-mount and clamp-on accessories Clamp-on equipment like bikeracks, kayak carriers, cargo boxes, and roof top tents Mount accessories like off-road lights, load stops, or a ladder roller in the top channels Add eye bolts or additional lights to the bottom channels Rubberized strips in the crossbars' top channels reduce wind noise and drag SideBar rails (sold separately) provide more carrying space for off-road and utility accessories Built-in tie-down points on uprights and crossbars' endcaps make it easy to secure gear QuickChange system allows rack to be installed and removed in minutes - no drilling required Simply slide tonneau adapters onto the tonneau cover's tracks and tighten to the pad and tower BedGrip clamps secure to bed rails on most common truck beds Etched measurements on uprights and crossbars help center the rack Same Key System (SKS) lock cores secure uprights to your truck SKS cores can be swapped out to make all your Yakima products keyed alike Sturdy aluminum construction with black powder coat is durable and rustproof Signature bottle openers allow you to enjoy a cold one after a long day Specs: Weight capacity: On-road: 500 lbs Off-road: 300 lbs Crossbar spread: 36" - 89" Upright height adjustment: 19" - 30" above truck bed rails Upright dimensions: 19" tall x 16-3/4" long x 5-1/2" wide Crossbar dimensions: 68" long x 3" wide x 1-1/2" thick Channel dimensions: 62" long x 7/16" wide x 5/16" deep Tonneau adapter dimensions: 16-3/4" long x 4-1/2" wide x 3" tall Limited lifetime warranty Tonneau Cover Compatibility This truck rack includes adapters that let you fit the uprights to the top of your tonneau cover.
Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). Pre-drilled for camper tie-downs.With 2 receivers, you can tow a trailer and carry a hitch-mounted bikerack or cargo carrier at the same time. And if you have a truck bed camper, this hitch has pre-drilled mounting points for TorkLift's super-sturdy camper tie-towns (sold separately).
Ever load up for a road trip or to go camping and wish you had a bigger trunk? This EXO system has you and your gear covered. On top of it's 20 cu ft of cargo space, we love that each box can be carried to your camp or hotel room to be unloaded.You can outfit the system with various accessories (sold separately) to carry all your biking, camping, and skiing gear. The system is compatible with a bikerack, ski rack, cargo carrier, and an enclosed cargo carrier, and you can easily swap them out to match any outdoor activity.
This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bikeracks and cargo carriers past your spare tire. ... Features: Custom-fit trailer hitch lets you tow a trailer or carry a bikerack or cargo carrier with your vehicle Precision, robotic welding maximizes strength and improves fit Bolt-on installation - no welding required Complete hardware kit and installation instructions included Lifetime technical support from the experts at etrailer Matte black powder coat finish over protective base coat offers superior rust resistance Ball mount, pin and clip sold separately Made in the USA Mounting hardware may be imported Specs: Receiver opening: 2" x 2" Overall length of receiver tube: 9" Rating: Class III Maximum gross trailer weight : 5,000 lbs Maximum GTW when used with weight distribution: 5,000 lbs Maximum tongue weight : 500 lbs Maximum TW when used with weight distribution: 500 lbs Limited lifetime warranty Rugged, Matte Black Finish The sturdy steel construction is protected with a matte black finish for added durability.
Filters
