Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushing included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Eye of spring attaches to hanger mounted on trailer frame Slipper end slides into hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 3,500 lbs Axle capacity: 7,000 lbs Length from center of spring eye to end of spring (unloaded): 26-5/8" Spring width: 2" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 5 Additional dimensions: see table Part Number A B C D E F e74SR 11-1/4" 22-3/4" 26-5/8" 12" 16-1/16" 3-3/16" Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 3,500 lbs Axle capacity: 7,000 lbs Length from center of spring eye to center of spring eye (unloaded): 24-7/8" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 6 Additional dimensions: see table Part Number A B C D e64SR 12-7/16" 13-3/16" 24-7/8" 3-1/2" The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer.
Weld-on jack has a retracted height of 25-1/8" and an extended height of 40-1/4". Square design provides superior side-load support. Offers 15-1/8" of screw travel and 13-3/4" of drop leg travel. Includes a sidewind handle.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black powder coated outer tube Zinc finished inner tube, footplate, and handle for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 25-1/8" Retracted 40-1/4" Extended Total lift: 28-7/8" Screw travel: 15-1/8" Drop leg travel: 13-3/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7-7/8" long x 5-7/8" wide Handle radius: 7-3/4" Adjustment hole spacing on drop leg: 3-5/16" from center of hole to center of hole 1-Year warranty
Weld-on jack has a retracted height of 24-3/4" and an extended height of 40-1/8". Square design provides superior side-load support. The drop leg offers 13-1/2" of lift on top of the 15-3/8" screw travel. Sidewind handle included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 24-3/4" Retracted 40-1/8" Extended Total lift: 28-7/8" Screw travel: 15-3/8" Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 6" wide Handle radius: 7-3/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty
Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. Offers 15-1/4" of screw travel and 13-3/4" of drop leg travel. Includes foldaway topwind handle.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has a claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black powder coated outer tube Zinc finished inner tube, footplate, and handle for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of handle mount): 24-1/4" Retracted 39-1/2" Extended Total lift: 29" Screw travel: 15-1/4" Drop leg travel: 13-3/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7-7/8" long x 5-7/8" wide Handle radius: 9-3/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between bottommost holes 1-Year warranty
Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. Drop leg offers 13-1/2" of lift on top of the 15-1/4" screw travel. Foldaway handle included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has a claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black powder coated outer tube and zinc finished inner tube, footplate, and handle for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of handle mount): 24-1/4" Retracted 39-1/2" Extended Total lift: 28-3/4" Screw travel: 15-1/4" Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 6" wide Handle radius: 9-3/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Round trailer axle beam measures 94" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 79" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately) Low ride height makes it easier to load and unload your trailer Straight, Easy Grease spindles - no drop Patented welding process prevents spindle failure with 40% stronger welds Built-in grease zerk for simple lubrication Spring seats and spindles are welded on CSA , QAI , and SAE-N certified Lifetime technical support from the experts at etrailer.com Made in the USA Specs: Weight capacity: 7,000 lbs Hub-face-to-hub-face length: 94" Spring-center-to-spring-center length: 79" Axle diameter: 3" Spindle/hub compatibility Bearings: 25580 inner, 14125A outer Seal: GS-2250DL, inner diameter 2.25" Limited lifetime warranty Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Hub is designed for use on trailer idler axles. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2" Wheel stud dimensions: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 2.72" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately) Low ride height makes it easier to load and unload your trailer Straight, Easy Grease spindles - no drop Patented welding process prevents spindle failure with 40% stronger welds Built-in grease zerk for simple lubrication Spring seats and spindles are welded on CSA , QAI , and SAE-N certified Lifetime technical support from the experts at etrailer.com Made in the USA Specs: Weight capacity: 7,000 lbs Hub-face-to-hub-face length: 95" Spring-center-to-spring-center length: 80" Axle diameter: 3" Spindle/hub compatibility: Bearings: 25580 inner, 14125A outer Seal: GS-2250DL, inner diameter 2.25" Limited lifetime warranty Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Round trailer axle beam measures 94" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 78-1/4" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately) 4" Drop, Easy Grease spindles Lowered axle beam provides lower deck height for easier loading and unloading Patented welding process prevents spindle failure with 40% stronger welds Built-in grease zerk for simple lubrication Spring seats and spindles are welded on CSA , QAI , and SAE-N certified Lifetime technical support from the experts at etrailer.com Made in the USA Specs: Weight capacity: 7,000 lbs Hub-face-to-hub-face length: 94" Spring-center-to-spring-center length: 78-1/4" Axle diameter: 3" Spindle drop: 4" Spindle/hub compatibility: Bearings: 25580 inner, 14125A outer Seal: GS2250-DL, inner diameter 2.25" Limited lifetime warranty Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 79-1/4" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately) 4" Drop, Easy Grease spindles Lowered axle beam provides lower deck height for easier loading and unloading Patented welding process prevents spindle failure with 40% stronger welds Built-in grease zerk for simple lubrication Spring seats and spindles are welded on CSA , QAI , and SAE-N certified Lifetime technical support from the experts at etrailer.com Made in the USA Specs: Weight capacity: 7,000 lbs Hub-face-to-hub-face length: 95" Spring-center-to-spring-center length: 79-1/4" Axle diameter: 3" Spindle drop: 4" Spindle/hub compatibility: Bearings: 25580 inner, 14125A outer Seal: GS2250-DL, inner diameter 2.25" Limited lifetime warranty Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Hub is designed for use on trailer idler axles. Fits 7,000-lb axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 7,000-lb trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2" Wheel stud dimensions: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 2.722" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
When youre hitching up, you don't want to crank forever or stack blocks to get the height right. The drop leg gets you close fast, and the side-wind handle keeps your hands clear so you're not banging your knuckles while you crank.Highlights Support Heavy Tongue Weight: 7,000 lb capacity holds the trailer in place while you hitch. Get Close To Height Faster: Drop leg adds 15" of adjustment so youre not cranking the full travel.
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 10-3/8". Extended height is 20-5/8". Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 10-3/8" Retracted 20-5/8" Extended Travel: 10-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
Galvanized hub-and-drum assembly is ideal for marine use. Compatible with electric or hydraulic brakes. Fits 5,200-lb to 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, cap, and 1/2" nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Galvanized finish on drum offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer Zinc-finished bolts resist corrosion Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 5,200-lb, 6,000-lb, and 7,000-lb axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" long Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Wheel studs: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 2.722" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14.5" to 16" wheels. 5 bolt pattern backing plate. Made in the USA.Features: Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Adjuster plugs (included) protect internal components from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Includes mounting nuts (bolts sold separately) Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 7,000 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you.
Mount your round, 3" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 7" Long U-bolts (1755892) (2) U-Bolt plates for 1-3/4" springs (TP-3000175) (8) 1/2"-20 Hex nuts (12N) Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 3" Typical 5,200-lb to 7,000-lb axle Spring width: 1-3/4" Thread dimensions: 2" long x 1/2"-20 Dimensions: see below
This hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with #42 spindles. Compatible with electric or hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Pre-greased hub is easy to install - no need to pack bearings Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheel stud diameter: 9/16" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
USA-made leaf spring provides an attachment point for your trailer's axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Made in the USA Specs: Quantity: 1 leaf spring Spring capacity: 3,500 lbs Axle capacity: 7,000 lbs Length from center of spring eye to center of spring eye (unloaded): 25-1/4" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 6 Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs U-bolt kit (APUBR-8) available separately Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Electric brakes are easy to install - no actuator or hydraulic lines necessary Adjuster plugs, mounting bolts, and hardware included Cast iron hubs and drums are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 7,000 lbs Hub-face-to-hub-face length: 95" Spring-center-to-spring-center length: 80" Drum dimensions: 12" diameter x 2" wide Bolt pattern: 8 on 6-1/2" Brake flange configuration: 5 bolt Axle tubing outer diameter: 3" Grease cap outer diameter: 2.72" Wheel stud diameter: 1/2" Wheel size: 16" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately) Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats, brake flanges, and spindles are welded on Made in the USA Specs: Weight capacity: 7,000 lbs Hub-face-to-hub-face length: 95" Spring-center-to-spring-center length: 80" Tubing outer diameter: 3" Bearings (sold separately): Inner bearing: 25580 Outer bearing: 14125A Brake flange configuration: 5 bolt Limited 5-year warranty Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
USA-made leaf spring provides an attachment point for your trailer's axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushings with 9/16" inner diameter. Powder coat ideal for marine applications.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction with powder coat resists corrosion Perfect for marine applications Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Made in the USA Specs: Quantity: 1 leaf spring Spring capacity: 3,500 lbs Axle capacity: 7,000 lbs Length from center of spring eye to center of spring eye (unloaded): 25-1/4" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 1/4" Number of leaves: 6 Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Get more ground clearance and a smoother ride when towing with Axle-Less trailer suspension. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, 4" drop spindle lowers deck height for easy loading. Fits any trailer frame width.Features: Delivers a smooth, stable, quiet ride - regardless of load size Jounce springs absorb road shock and support trailer's load Rebound springs minimize body roll, rattle, and bottoming out Built-in camber and toe-in reduce wear on your trailer's tires Units work independently - what affects one side of your trailer won't affect the other Eliminates axle beam to increase ground clearance and fit any trailer frame width System replaces 1 trailer axle and suspension components 2 Separate units bolt directly to your trailer's frame Designed for your on-road adventures Strong steel construction is built to last Black powder coat resists rust and corrosion Lowers trailer deck height for easier loading and unloading 4" Drop spindle is built in Allows for simple bearing maintenance with built-in grease zerks Specs: Application: single- and tandem-axle trailers that use regular tires Tandem-axle trailers require 2 complete systems Not recommended for triple-axle trailers Quantity: 2 suspension units (without hubs) Weight capacity: 7,000 lbs Brake flange configuration: 5 bolt Bolt hole diameter: 5/8" Suspension travel: 2-1/2" 3-Year limited warranty Tire, Wheel, and Hub Compatibility Tire size: ST235/85R16 or smaller Wheel diameter: 16" or smaller This assumes a wheel with zero offset Bearings (sold separately) Inner: 25580 Outer: 14125A or 15123 Races (sold separately) Inner: 25520 Outer: 142376 or 15245 Seal: 10-36 (sold separately) Inner diameter: 2.250" Outer diameter: 3.376" Note: This Axle-Less system requires crossbeam support.
Hub is designed for use on trailer idler axles. Fits 7,000-lb axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Sturdy iron construction Zinc-enriched paint finish QAI and CSA certified Specs: Application: 7,000-lb trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2" Wheel stud dimensions: 9/16" diameter x 1-9/16" long Grease cap flange diameter: 2.722" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Filters
