Easily and effectively connect your motor home to your towed vehicle with this water-, oil- and chemical-resistant electrical cord. Flexo-Coil technology allows cord to extend more than 8' and then contract conveniently for storage.
Attach your trailer connector mounting bracket to your vehicle. Simply bolt this sturdy steel bracket to your trailer hitch, bumper, or vehicle's frame. Use with a no-drill mount (18136 or 18140) for an even easier installation.
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent damage from electrical feedback. Includes 7-way to 6-way coiled adapter cord and 6-way socket.Features: Complete wiring kit connects your RV's tail, brake, and turn signal lights to your towed car Diodes prevent feedback that can damage your vehicle's electrical components Protected from corrosion by powder-coated aluminum casings 7-Wire to 6-wire adapter cord runs power from RV to towed car Coiled to prevent dragging and tangling Resistant to wear and tear with durable vinyl casing 6-Way socket hardwires to towed car and mounts with included bracket Kit includes: 4 Hy-Power diodes 4-Wire harness 7-Way to 6-way coiled adapter cord 6-Way socket with mountingbracket 1 Butt connector, 1 ring terminal, split loom, and zip ties Made in the USA Specs: Diode max amperage: 85 amps Diode max voltage: 24 volts Coiled cord Max length: 8' Compressed length: 15" Wiring harness length: 27' Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
This bracket lets you keep your 4-way electrical plug up off the ground when you're not towing to keep it clean and in good condition. It attaches to your trailer with 1/4" diameter screws (not included).
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. ... Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring with the included quick-splice connectors Bonded wires are color coded (see wire configuration below) Attaches to your hitch with included mountingbracket and hardware Includes durable, molded-molded, standard female output socket Specs: Harness length: 60" Bracket dimensions: 1-3/4" tall x 2-3/4" long Bolt hole spacing: 1-3/4" center to center Maximum amperage: 7.5 amps per circuit Wire gauge: 16 Limited 1-year warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.Features: Adapts 4-way flat to both 7-way RV and 4-way flat 4-Way flat output connects tail lights, brake lights, and turn signals 7-Way connects tail, brake, reverse, turn signals, and auxiliary power Dust covers keep connectors clean when not in use Split loom keeps wires contained and well protected Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way Included hardware and metal mountingbracket secures wiring to the vehicle or trailer hitch 1-Year limited warranty Specs: Distance between bracketmounting holes center to center: 2-1/4" Harness length: 17" Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground
This vehicle-end connector converts any 4-way flat, vehicle-end plug to a 7-blade RV connector outlet.Includes mountingbracket and hardware 1-Year limited warranty
Plug-and-play custom harness gets turn and brake signals on your towed car with no hardwiring or splicing, and no effect on your warranty. The built-in diodes protect your car from electrical feedback.Features: Allows your RV's tail, brake, and turn signals to display on your car's tail lights Plugs right into car's connection points - no cutting or splicing Custom designed for your vehicle No effect on your warranty Prevents feedback that can damage your vehicle's electrical components with diodes Provides 4-way flat plug at front of towed car Requires additional harness to connect to motorhome - sold separately Includes wiring harness, mountingbracket, and installation hardware Specs: Max amperage: 7.5 amps per circuit Limited 1-year warranty Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
Sleep soundly in your RV knowing that your family will be better protected with this accurate propane detector. When gas is detected, an LED and a loud horn immediately alert you so you can get to safety more quickly. Can replace almost any alarm.Features: Detector quickly warns you of hazardous levels of propane inside your RV or camper Helps keep your family safe and out of harm's way Uses less power than other detectors Highly selective sensor reduces the number of false alarms from non-threatening gases Solid red LED light and continuous horn alert you to propane gas Button on the front lets you test the detector to make sure it's working properly Also can silence the alarm up to 5 minutes for non-urgent situations Compact, slim design helps save wall space in your RV Durable polycarbonate construction in black Easy installation onto the wall - 2 wires hook up to your battery Can replace 90% of all detectors with universal mountingbracketsMounts4" - 18" above the floor Does not include flat 1/2" self-tapping screws ETL and cETL listed, and exceeds UL 2034 and 1484 and CSA 6.19.01 requirements Specs: Alarm dimensions: 4-1/4" long x 2-5/8" wide x 1/2" thick Mountingbracket dimensions: Larger bracket: 7-1/4" long x 3-3/8" wide Smaller bracket: 5-3/4" long x 4-1/4" wide Mounting hole spacing (center on center): Alarm: 3-5/8" Larger bracket: 6" Smaller bracket: 5-1/4" RV voltage requirement: 8V-15 V DC LP sensitivity: as low as 4200 ppm Current draw: 17 mA at 13.5V Alarm intensity: 85 dB Lifespan: 5 years Operational temperature range: -40 degrees F to 150 degrees F (-40 degrees C to 66 degrees C) 1-Year limited warranty Having a propane gas leak in your RV is a scary situation that you don't want to even think about let alone experience.
This heavy-duty tow bar is easy to maneuver, with a swivel head joint that lets the arms twist left and right. Non-binding levers let you disconnect at the campsite, even on rough terrain. Extra-long arms help you make tight turns.To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system. For the RV Between the RV and Towed Car For the Towed Car Hitch Tow bar Base plate Wiring plug Safety cables Braking system Wiring adapter cord Wiring kit/diodes The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar.
Automatically level and stabilize your travel trailer with this electronic leveling system. 5 Precise, motorized jacks can be operated by the included control panel or via your smart device (if RV has Wi-Fi and factory-installed OneControl system).The power tongue jack slides through the hole in the coupler on the trailer A-frame and secures to the included mounting plate. The 2 landing gear C-jacks mount to the existing points on your RV and secure with included hardware. The 2 rear jacks come with mountingbrackets that bolt onto I-beam frames with included hardware.
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.Features: Incandescent trailer light kit comes with everything needed to properly light a trailer over 80" wide Includes 2 tail lights, 2 amber clearance lights, 2 reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware Sonically sealed, waterproof tail lights and clearance lights are submersible 2 Low-profile combination tail lights (ST16RB and ST17RB) Provide stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex functions Driver's-side light includes license illuminator 2 Amber clearance lights (MC91AB) Self-grounding chrome bases Gaskets for weathertight seal 2 Amber reflectors (RE11AB) meet FMVSS "A" for reflex when properly applied Durable polycarbonate housing on all lights Compatible with 12V DC systems Simple installation with included mountingbracket (LP5SB) and stainless steel mounting hardware Tail lights stud mount to trailer Clearance lights surface mount to trailer Reflectors screw-mount to trailer or attach with adhesive backing 25' Wiring harness with 4-pole connector DOT approved PC rated Specs: Application: trailers over 80" wide Tail light dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Distance between mounting holes (center on center): 2" Clearance light dimensions: 2-7/8" long x 1-1/2" wide x 1" thick Reflector dimensions: 4-7/16" long x 1-15/16" wide Distance between mounting holes (center on center): 3-15/16" Power draw at 12V: Tail lights: Stop/turn: 2.3 amps Tail: 0.9 amps Clearance lights: 0.2 amps Limited 3-year warranty Note: Over 80" Federal Regulations require additional clearance lights (like MC94RB, sold separately) Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.Features: Roof vent with fan moves air in and out of your RV, camper, or enclosed trailer Vent allows air to circulate while your RV remains locked and secure 12V DC, variable-speed fan has 4 speed options to let you increase or reduce airflow Exhausts air out Circulates air like a ceiling fan when the vent is closed Flush-mounted keypad on vent allows you to turn the fan on and off and set the fan speed White-colored dome (or lid) is made of high-density polypropylene Seamless, low-profile appearance when closed Manual lift design has 2 arms to support the dome and keep it open Manual knob lets you operate dome Bug screen keeps insects out and is easy to remove for cleaning or maintenance Fuse-protected, ball bearing motor is sealed to keep out dust, dirt, and moisture Rubber weather seal helps prevent leaks when vent is closed Molded-in mounting flange is constructed of UV-resistant ABS plastic Smooth edges won't cut you during installation Mounting tabs on flange allow for no-drill, tool-free installation of FanMate vent cover (sold separately) White interior trim piece (or garnish), insulated electrical connectors, and hardware are included for installation Roof sealant sold separately 2-Wire design Black wire is power White wire is ground Specs: Fits: roofs 2" - 6-1/2" thick Opening size: 14" wide x 14" long Overall dimensions (outside of flange to outside of flange): 18-1/8" long x 16-1/2" wide Garnish dimensions: 16-1/4" long x 16-1/2" wide Vent extends above roof: When closed: 4-1/4" When open: 12-1/4" Overall fan diameter: 12" Fan capacity: 900 CFM Quantity of fan blades: 10 Power draw: 5 amps Warranty: 2-Year limited on vent assembly Limited lifetime on dome Note: Not for use above tubs, showers, or range cooking surfaces.
This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.Features: Adapts 4-way flat to both 7-way RV and 4-way flat 4-Way flat output connects tail lights, brake lights, and turn signals 7-Way connects tail, brake, reverse, turn signals, and auxiliary power Dust covers are dirt and weather-resistant Split loom keeps wires contained and protected from the elements Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way Included hardware and metal mountingbracket secures wiring to the vehicle or trailer hitch 1-Year warranty Specs: Distance between bracketmounting holes center to center: 2-1/4" Harness length: 10" Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground
Magnetic mounting bracket holds up your 4-pole flat trailer connector to prevent your plug from dragging on the ground. Strong magnet keeps bracket tightly attached to your hitch. Heavy-duty composite material is durable and lightweight.
Get 4 super rust-resistant hub-rotor assemblies - complete with inner (25580) and outer (14125A) bearings - and an electric-over-hydraulic actuator that works with your existing brake controller for stellar performance. Includes lines and fittings.This test is designed to evaluate the friction performance of automotive brakes, so DeeMaxx's passing grade should tell you just how well made these products are. The patented design of the caliper mounting bolt and sleeve makes installation easier while ensuring that the sleeves stay in place within the caliper. In addition, the side-support design of the caliper mountingbracket puts all of the weight on the bracket instead of on the bolts.
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 4 Precise, motorized jacks can be operated by either the included touchpad. Hitch recognition memory function offers simple hookup.Features: Electronic leveling system lets you quickly and easily level and stabilize your 5th-wheel RV Auto-level feature automatically levels your trailer perfectly with the touch of a button Manual mode lets you move each jack individually or in front or rear pairs Touchscreen remote (LC358601 - sold separately) lets you level your RV from up to 50' away Touchpad control has easy-to-read buttons and LCD screen Mounts inside a front exterior storage compartment with included hardware Hitch recognition memory function makes hooking up simple Automatically returns your trailer to the position at which you unhooked 4 Motorized jacks raise, lower, and support your RV Drop legs on front landing gear allow for greater adjustability Precise leveling using Hall effect technology - measures motor revolutions per minute instead of amps Sturdy steel construction with corrosion-resistant black powder coat finish Manual override access on the jacks allows operation in case of a power failure Large, round foot plates help prevent jacks from sinking into the ground Bolt-on jack installation with included hardware - no welding required Rear jacks install on 8", 10", or 12" frames with included mountingbrackets - drilling is required Front landing gear uses existing mounting points on your RV 12-Volt system wires to your trailer's power source Includes control module, sensor, wiring harnesses, and mounting hardware Specs: Application: 5th-wheel trailers with a GVWR up to 15,500 lbs Quantity: 4 jacks Total travel: Rear jacks: 12-1/2" Front jacks: 21" 1-Year limited Warranty Note: Determine where these jacks will be mounted on your trailer.
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.Air Spring Installation Each Ride-Rite kit includes custom-fit brackets that connect to your axle and frame. The brackets provide the mounting points for the air springs. No drilling required.
Sleep soundly in your RV knowing that your family will be better protected with this accurate propane and CO detector. When either gas is detected, an LED and a loud horn immediately alert you so you can get to safety more quickly.Features: Detector quickly warns you of hazardous levels of propane and carbon monoxide inside your RV or camper Helps keep your family safe and out of harm's way Uses less power than other detectors Highly selective sensors reduce the number of false alarms from non-threatening gases LED light and loud horn provide visible and audible cues that you'll catch day or night 4 Beeps and a flashing red light alert you to carbon monoxide Continuous beep and solid red light alert you to propane gas or a combination Button on the front lets you test the detector to make sure it's working properly Also can silence the alarm up to 5 minutes for non-urgent situations Compact, slim design helps save wall space in your RV Durable polycarbonate construction in white Easy installation onto the wall - 2 wires hook up to your battery Can replace 90% of all detectors with universal mountingbracketsMounts4" - 18" above the floor Does not include flat 1/2" self-tapping screws ETL and cETL listed, and exceeds UL 2034 and 1484 and CSA 6.19.01 requirements Assembled in the USA Specs: Alarm dimensions: 4-1/4" long x 2-5/8" wide x 1/2" thick Mountingbracket dimensions: Larger bracket: 7-1/4" long x 3-3/8" wide Smaller bracket: 5-3/4" long x 4-1/4" wide Mounting hole spacing (center on center): Alarm: 3-5/8" Larger bracket: 6" Smaller bracket: 5-1/4" RV voltage requirement: 8V-15 V DC CO sensitivity: as low as 70 ppm LP sensitivity: as low as 4200 ppm Current draw: 17 mA at 13.5V Alarm intensity: 85 dB Lifespan: 5 years Operational temperature range: -40 degrees F to 150 degrees F (-40 degrees C to 66 degrees C) 1-Year limited warranty Having a propane or carbon monoxide gas leak in your RV is a scary situation that you don't want to even think about let alone experience.
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 6 Precise, motorized jacks can be operated by either the included touchpad or a Bluetooth compatible app on your smartphone.Installation Upgrading your rig with the Ground Control 3.0 system is simple. The 2 landing gear jacks mount to existing points on your RV and secure with included hardware. The 4 rear jacks come with mountingbrackets that bolt onto 8", 10", or 12" I-beam frames with included hardware.
Electric-hydraulic brake actuator works with your brake controller (sold separately) to activate your trailer's disc brakes. Vented housing releases heat and moisture. Enhanced wiring protection safeguards internal electronics.Features: Electric-over-hydraulic brake actuator activates your trailer's hydraulic brakes when you apply the brakes in your vehicle Brake controller (sold separately) is required to send signal from tow vehicle to actuator when brakes are applied 7-Way trailer connector (sold separately) is needed to transmit signal from brake controller Improved functionality when compared with surge brake couplers Faster response time - activates when you apply brakes in tow vehicle, as opposed to when trailer pushes against hitch ball No need to manually lock out brakes when you back up Trailer brakes can be intentionally activated when you reverse Manual override on brake controller can be activated so you can engage the trailer brakes without having to apply your vehicle brakes Vented design releases pressure, moisture, and heat to protect the internal components Allows actuator to be mounted in places where most actuators would overheat Electronic, proportional pressure valve ensures smooth, even braking Self-priming pump reduces time needed for brake bleeding Enhanced wiring detects dangerous current levels and shuts down actuator electronics in the event of a surge Durable aluminum housing and stainless steel fasteners resist corrosion Goretite seals protect the circuit board from the elements Compatible with most 9-amp-hour-battery breakaway kits (sold separately) DOT compliant Unit installs on trailer frame and connects to trailer's wiring and hydraulic brake lines (sold separately) Made in the USA Specs: Application: single-, tandem-, and triple-axle trailers with disc brakes Maximum output pressure: 1,600 psi Dimensions: 11" long x 6" wide x 7" tall Distance between mounting holes (center to center): 2-1/2" Between holes on same side of bracket 9-13/16" Between holes on opposite sides of bracketMounting hole diameter: 1/4" Hydraulic port size: 3/16" Power: 12V DC Wire configuration: Black: 12-volt power Blue: brake controller Yellow: breakaway White: ground 2-Year limited warranty Dexter DX Series Actuator The Dexter DX Series electric-over-hydraulic actuator is a dependable choice for your trailer braking needs.
Electric step assembly includes everything you need to automatically open and close the steps with your RV door. Motor and control unit extend and retract steps. Switch kit overrides step retraction. Amber light illuminates when steps extend.These provide extra length if the old steps are longer or wider than the new. Once you know where the mountingbracket will go and what size mountingbracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
Replaces the electric steps, motor, and control unit for your Kwikee 27 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. Wiring pigtail hardwires to your RV's power.These provide extra length if the old steps are longer or wider than the new. Once you know where the mountingbracket will go and what size mountingbracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
Get a head-start on wiring your towed car before you even get the installation started. This kit comes with butt connectors pre-installed and ready to splice into your wiring. Integrated block diodes protect your vehicle from electrical feedback.Features: Connects your RV's tail, brake, and turn signal lights to your towed car's tail lights Plugs into your motorhome with 4-way flat connector Splices quickly into car's electrical system with included butt connectors Color-coded wires with wiring guide makes installation easier Prevents feedback that can damage your vehicle's electrical components with integrated block diodes Includes 4-wire harness, 4-flat extension cable, mountingbracket, silicone sealant, zip-ties, and installation hardware 1-Year limited warranty Do I Need a Brake Light Relay?
Filters
