This light module filters out unwanted turn signal input from tail lights to ensure your 3rdbrakelight activates only when brakes are applied. ... Features: 3rdBrakelight module filters out unwanted turn signal input to ensure your 3rdbrakelight activates only when brakes are applied Required when using a single light as a third brakelight Great for domestic vehicles that typically use incandescent bulbs Maximum combined amp draw must be less than 1.5 amps 1-Year warranty
Adds an eyeball camera to your GCH Automotive custom 3rdbrakelight camera system. Plugs in with an included 18' long RCA connector wire.Features: Adds an eyeball camera to your GCH Automotive custom 3rdbrakelight camera system Features a wide 180° field of view Plugs in using a standard RCA connector Includes 18' of wire
Custom bezel with built-in night vision camera mounts behind existing third brakelight. Line up your fifth wheel or gooseneck trailer using the integrated 4.3" color screen on the rear view mirror. Includes bezel, camera, wiring, and mirror.The power wire will run to your truck's battery. The custom bezel will only fit the flat, new-style 3rdbrakelight as pictured above.
15-1/4" x 1-1/4" x 1/2". Waterproof, LED trailer light with 13 diodes provides stop, turn, tail, and rear reflex functions. Premium LEDs last up to 100,000 hours. Durable polycarbonate base. ... Features: Third brakelight provides stop, turn, and tail light functions Built-in rear reflex reflector removes the need for a separate reflector Sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Rated for up to 100,000 hours of operation More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base with acrylic lens Red lens with red LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included Can be mounted horizontally or vertically 3-Wire design White wire is the ground Black wire is for the tail lights Red wire is for the stop and turn lights P2 rated light produces a 90-degree beam pattern DOT and SAE compliant Meets FMVSS 108 requirements for automotive lighting Assembled in the USA Specs: Dimensions: 15-1/4" long x 1-1/4" wide x 1/2" deep Distance between mounting holes (center on center): 13-13/16" Diodes: 13 Operating voltage: 9V-16V DC Wire length: 7" 1-Year limited warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Replaces the switch kit allows you to toggle between your GCH Automotive truck bed camera system (FRDBRK360SW-K1) and your Ford factory backup camera. Designed for trucks with 8" factory monitor.Features: Replaces the switch kit that allows you to toggle between your GCH Automotive truck bed camera system (FRDBRK360SW-K1) and your factory backup camera Designed to work with trucks that have the following: FRDBRK360SW-K1 third brakelight camera 8" Ford factory monitor
Replaces the switch kit that allows you to toggle between your GCH Automotive truck bed camera system (FRDBRK360SW-K2) and your factory 4.2" backup camera. Designed for trucks with 4.2" factory monitor.Features: Replaces the switch kit that allows you to toggle between your GCH Automotive truck bed camera system (FRDBRK360SW-K2) and your factory backup camera Designed to work with trucks that have the following: FRDBRK360SW-K2 third brakelight camera 4.2" Ford factory monitor
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-1/16" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 15 Voltage: 12V Power draw: 0.29 amps Lifetime warranty on LEDs Quantity: 1 light bar
7-1/2" Low-profile, LED tail light displays brake, tail, and turn signals on the passenger side. It has a built-in reflex reflector. It mounts to the surface of the motorhome and wires into the RV.Features: Low-profile rectangular RV brake, turn, and tail light Glows for tail light Brightens for brakelight Flashes for turn signal Built-in reflex reflector Waterproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount Hardware not included 3-Wire pigtail hardwires to RV Specs: Configuration: passenger side Drivers side: RVSTL21 (sold separately) Overall dimensions: 7-1/2" long x 3-11/16" tall x 1-5/16" thick Compatible with 12V DC systems Diodes: 6 Power draw at 12V Stop/turn: 0.117 amps Tail: 0.053 amps Lifetime warranty on LEDs
20-1/2" x 1". 4-Function, waterproof light bar acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. ... Features: Low-profile trailer tail light serves 4 functions on trailers over 80" wide Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens with red and white LEDs Clear lens with red LEDs for tail light Clear lens with white LEDs for backup light Surface mounts to trailer - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brakelight Black wire for tail light DOT compliant SAE compliant for trailers over 80" wide Specs: Overall dimensions: 20-1/2" long x 1" tall x 3/4" deep Distance between mounting holes (center on center): 19-5/8" Diodes: 19 Power draw at 12.8 volts: Stop/turn signal light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
12-5/8" Long x 1" tall. Waterproof trailer light serves 3 functions: brake, tail, turn. Low-profile Thinline light fits in tight spaces. Surface mount on 11-3/4" centers - hardware not included. 3-Wire pigtail. 9 LEDs. ... Features: Trailer tail light serves 3 functions Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible Thinline Series has a low profile so that light can fit in tight spaces Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Red lens 3-Wire pigtail - 19 AWG White wire for ground Black wire for tail light Red wire for turn signal Mounts on surface of trailer - hardware not included DOT compliant Specs: Dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Diodes: 9 Power draw at 12.8 volts: Stop light: 0.2 amps Tail light: 0.01 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
20-1/2" Long x 1" tall. Waterproof trailer light serves 3 functions: brake, tail, turn. Low-profile Thinline light fits in tight spaces. Surface mount on 19-5/8" centers - hardware not included. 15 LEDs. ... Features: Trailer tail light serves 3 functions Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible Thinline Series has a low profile so that light can fit in tight spaces Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Red lens Hardwire with separate ground wire Mounts on surface of trailer - hardware not included DOT compliant Specs: Dimensions: 20-1/2" long x 1" tall x 3/4" deep Mounting holes: 19-5/8" apart on center Diodes: 15 Power draw at 12.8 volts: Stop light: 0.2 amps Tail light: 0.01 amps Wire configuration: White: ground Black: tail light Red: turn signal Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
17" x 1-3/8" x 1". Waterproof LED combination trailer tail light acts as a brake, tail, and turn signal when properly mounted. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.Features: Low-profile LED trailer light serves 3 functions: Stop Turn Tail Sonically sealed, polycarbonate housing and lens are waterproof Durable surface-mount technolgy (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Surface mount - hardware not included 3-Wire design Specs: Overall dimensions: 17" long x 1-3/8" wide x 1" deep Distance between mounting holes (center on center): 16-1/8" Diodes: 11 Power draw at 12.8V: Stop/turn: 0.350 amps Tail: 0.022 amps Quantity: 1 light Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
12-5/8" Long x 1" tall. Waterproof trailer light serves 3 functions: brake, tail, turn. Low-profile Thinline light fits in tight spaces. Surface mount on 11-3/4" centers - hardware not included. 3-Wire pigtail. 9 LEDs. ... Features: Trailer tail light serves 3 functions Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible Thinline Series has a low profile so that light can fit in tight spaces Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Clear lens with red LEDs 3-Wire pigtail - 19 AWG White wire for ground Black wire for tail light Red wire for turn signal Mounts on surface of trailer - hardware not included DOT compliant Specs: Dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Diodes: 9 Power draw at 12.8 volts: Stop light: 0.2 amps Tail light: 0.01 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
15" x 1-3/8". Low-profile LED tail light serves 3 functions on trailers over 80" wide. Built-in reflex reflector. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.Features: LED tail light serves 3 functions for trailers more than 80" wide Stop, turn and tail light Thinline Series has a low profile so that light can fit in tight spaces Built-in reflector removes the need for a separate reflector Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 3-Wire design hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-3/8" tall x 5/8" deep Distance between mounting holes (center on center): 14-1/8" Diodes: 11 Power draw at 12.8V: Stop: 0.350 amps Tail: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
13-1/4" x 2-1/8" x 1-7/16". Waterproof LED tail light functions as a stop, turn, and tail signal on trailers over 80" wide. Durable polycarbonate lens and housing. Surface mount - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
Need a reliable rear light for your RV? This combination light includes stop, turn, and tail functions with integral reflex for added visibility. It installs easily and provides dependable lighting for safe travel.Surface-Mount Design: Mounts directly to the RV rear for replacement or new install. Specs Lighting: Light type: Incandescent Color: Red and clear Dimensions: 8-9/16" x 3-1/8"
... It installs easily and covers all your essential lighting needs.Highlights Complete Trailer Lighting Setup: Kit includes tail lights, side marker lights, harness, and license bracket. DOT Lighting Coverage: Includes required lighting and reflectors for DOT compliance on trailers.
Need a reliable marker light for your setup? This red incandescent light provides steady visibility with a built-in reflector for added safety. It installs easily and fits standard mounting patterns for a simple replacementDOT-Compliant Marker Light: Meets DOT requirements for trailer lighting applications. Specs Lighting: Color: red Voltage: 12 V Light type: incandescent Dimensions and Mounting: Dimensions: 4-1/16" x 2-1/16" Mounting: 3" centers Shape: oblong Construction: Base color: white
Need a reliable marker light for your setup? This amber incandescent light provides steady visibility with a built-in reflector for added safety. It installs easily and fits standard mounting patterns for a simple replacementDOT-Compliant Marker Light: Meets DOT requirements for trailer lighting applications. Specs Lighting: Color: amber Voltage: 12 V Light type: incandescent Dimensions and Mounting: Dimensions: 4-1/16" x 2-1/16" Mounting: 3" centers Shape: oblong Construction: Base color: white
Need a reliable marker light for your setup? This amber incandescent light provides steady visibility with a built-in reflector for added safety. It installs easily and fits standard mounting patterns for a simple replacement.Highlights Restore Side Marker Visibility: Amber incandescent light handles clearance and side marker duties. More Noticeable Along Trailer Sides: Built-in reflex optics reflect light from passing traffic.
Get more visibility out back without adding a cluster of separate lights. This slim 15" bar combines your stop, turn, tail, and backup lights, while the smoke lens keeps a low-key blacked-out look when the lights are off.Highlights Four Functions in One Light Bar: Stop, turn, tail, and back-up lighting share one 15" fixture. Black-Out Look When Off: Smoke lens keeps the light bar dark until the red or white LEDs illuminate.
This long, thin tail light fits in those tight spaces on your trailer or truck where you couldn't fit anything else. It mounts on the surface and wires to your trailer with the included 3-wire pigtail.Features: Thinline Series light fits in tight spaces GloLight tail light is bright and easy to see, day or night Bar glows for tail light Center LEDs light up for brakelight and flash for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount Hardware not included 3-wire pigtail wires to trailer Black wire for tail light Red wire for brake and turn signal White wire with #10 ring terminal for ground DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 17" long x 1-3/8" tall x 1" thick Mounting holes: 16-1/8" apart on center Pigtail harness length: 7" Diodes: 28 Power draw at 12.8 volts: Stop/turn signal light: 0.634 amps Tail light: 0.445 amps Lifetime LED warranty
Filters
