Result: winch mounting tray

I do have a solution for you, but you will not be able to use any of the traditional dual hitch adapters, since these are designed primarily for flat towing. The Malone 2" Dual Purpose Hitch Receiver you linked to your question is unique, since…

We have exactly what you need, so long as your current hub uses an #L68149 inner bearing and #L44649 outer bearing, which you will be able to tell when you remove your current hub assembly as the bearing numbers should be printed on the bearing…

On many drum brakes there are wear indicators at the pad material on the shoes. If the pad material is riveted on and you have reached the rivets then it is time to replace them. If you have the brakes adjusted out all the way and the braking is…

There really isn't a specific width (or thickness) of a winch mounting plate to use with a 12,000 lb winch. You just want to choose one that has a mounting bolt hole pattern that is compatible with your winch. The Bulldog Winch Hitch Mounted…

The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of insufficient gauge to allow enough power to pass through to run a trailer mounted winch. The main function of that circuit would be for lighter-duty…

The tow loops on the Curt Front Mount Trailer Hitch Receiver part #31180 are recovery points that you can hook a tow strap to like part #EM59700 and pull yourself out with if you ever get stuck. They are rated for 9,000 lbs each just like the…

Yes, the Superwinch Hitch Mounted Winch Mounting Plate with Handles #SW2050 is compatible with your Superwinch S9000 front mount winch. Attached is a review video for you to check out.

For your 2003 Ford F-350 Cab and Chassis (or Crew Cab) the Draw Tite hitch part #65022 is a confirmed fit. It installs in the middle of the bumper. If you check out the picture I attached you will see exactly where it installs.

The Trailer and Vehicle Electric Winch Wiring Kit #BDW20207 on your Badlands 12,000 winch will work well. The 2 AWG wire will be adequate for your winch as it is confirmed to work on Superwinch winches up to 16.5k in capacity.

It sounds like you're looking for the Extension Cord for ComeUp Winch Hardwired Remotes #CU882843. This extension measures 16" long and will work great with your Badlands winch since they both use a 6-pin connector. If you needed a longer…

My suspicion is that you have a poor ground connection somewhere on your trailer. The fact that everything works fine until the running lights are turned on is the dead giveaway. When the tail lights are turned on, the trailer lighting is drawing…

It's not common for the spindle number to be printed anywhere on the axle. That said, if you're looking for new bearings/races and seals all you need to do is note the capacity or measure. The easiest method would be to crawl under the…