Search: gooseneck offset   >  

Cooper, you're just going to need the Adapter Rails for Curt 5th Wheel Hitch #C47BR. This adapter will pop into your OEM pucks and provide a mounting point for your Curt A20 5th Wheel Trailer Hitch.

You can use the Curt E16 fifth wheel hitch part #C16115 in the bed of your 2018 Chevy Silverado with the OEM pucks but you would need to use the adapter part #C47BR which converts the pucks to the rail kit style this hitch needs.

For your 2019 GMC Sierra 3500 you will want the Curt Q25 5th Wheel Trailer Hitch w/ R24 Slider item #C16566. This hitch has a 24,000 lbs capacity and is our highest capacity slider. The 2-jaw locking system gives you less rattle and more security. It…

Yes, the Curt Q25 5th Wheel Hitch item #C16069 will fit in the factory puck system of a 2018 Chevy Silverado 2500. The base of this hitch will drop right down into the factory pucks. This hitch is recommended for trucks with the longer 8' beds or…

Yes, the Gen-Y offset ball adapter part #GY43XR that fits the Ford puck system of your truck can be used with the Reese Goosebox without voiding any warranties.

The Curt Safety Chain Loops #C60691 are the loops which will fit your 2023 Ford F-350 with the OEM puck system. This will allow you to connect your safety chains when using the Gen-Y Hitch Gooseneck Trailer Hitch #GY43XR.

I've attached a picture with three different measurements for the B&W Extend-A-Goose Gooseneck Coupler - 2-5/16" Ball - 10" Offset, #BWTEXA4200. It is 12 inches from the base or bottom of the coupler to the center of the lowest pin…

We can help you with either new disc brakes or with replacement parts for your existing disc brake setup on your Ranger boat trailer. Either way you will want to confirm the axle rating of the single or tandem axles on the trailer since complete…

The correct plug and harness that is designed for the cutout in the bed of a 2021 Chevrolet Silverado 2500 is the 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring part #HM40975-11998. It will hardwire into the wires under…

The Dexter 8-427 hub is no longer available. Even looking through Dexter's site the only references to it are replacement bearings. You can use a wheel with a larger pilot hole as long as the wheel attaches to the hub using lug nuts and not…

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

I checked with GEN-Y and they were able to get me the distance from the top bolt hole of the #GY48GR down to the bottom of the coupler which you can see in the attached picture as well as a few other dimensions. It's 23.8 inches. It does not come…