Search: flag holder   >  

Hey Sean! As long as you don't have anything placing a draw on the Bright Way Solar Battery Charger #BRW54FR, and the 4-6 hours of sunlight is unrestricted then this kit will be just fine for keeping your Group 24 battery topped off.

Hey Mark, thanks for reaching out! Attached are 2 photos that Furrion provides in their instructions for the wiring of the Furrion Chill HE RV Air Conditioner System - Mutli Zone #FR67FJ. I believe the wire you're referring to is the…

Hey John, To determine the correct replacement leaf springs for your trailer you'll want to jack up one side to take the pressure off the leaf springs and then can measure from the center of one eyelet to the center of the other eyelet. From…

Definitely looks like the springs are being overloaded and need to be replaced. You can use higher rated leaf springs but, the higher you go the stiffer the ride will be. Since we know the weight class with your axles the next step would be to…

Yes, you can upgrade your current leaf springs with the higher rated 4,500 lb part #e27SR and you'll be fine. The suspension might be a little stiffer but you wouldn't have to worry about it going flat like what you have now.

I have a set of leaf springs for your Lippert Axle they are 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long item #e27SR. You will want to measure the spacing on your mounting brackets to confirm compatibility. The length from…

Since you have a 3,500 lbs axle, I recommend the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles item #e22YR. These are for 4,000 lbs axles which will still work great with your Gulf Stream trailer. As far as your 26" measurement goes. If…

Good question, and what happens is that leaf springs elongate over time, and since you mentioned you got measurements of 25-1/2 inches from center eye to center eye and 26 inches under partial load, the best option for leaf springs really is the…

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

No, it does not. The hitch ball does not come mounted on the Equal-i-zer Weight Distribution item #EQ37101ET. You will need to use a 1-7/8" Thin walled socket like item #EQ70-00-4800 to get it installed.

While Thule does not yet have any bike racks that match your needs, I do have other recommendations from other brands. For absolute versatility, I've been very impressed by the Hollywood Racks RV Rider #HLY64FR. It checks off ALL the boxes: fat…

To install a ball, like the Equal-i-zer #EQ91-00-6080, you will need a 1 7/8 inch socket that uses a 3/4 inch drive. The Equal-i-zer Thin Walled Socket #EQ70-00-4800 is ideally suited for this application. The torque rating on the ball will also be…