Search: erickson   >  

The only difference between the two Dexstar 8 spoke trailer wheels is the weight capacity. The #AM20768 has a 3960 lb capacity while the #AM20750 has a 3750 lb capacity. Other than that, the wheels are identical. I've linked you to our trailer…

There isn't a set rule, but I'd recommend bolting the e-track into place. The distance between fasteners will depend on the nature and structure of the floor of your trailer. If the metal floor has a sturdy wood backing, I'd attach the e…

The closest standard axle we have available to the dimensions that you mentioned is the CE Smith Trailer Axle Beam #CE33201GA. This galvanized trailer axle has a spring center measurement of 46-1/2 inches and a hub face measurement of 57-1/2 inches.…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

That's a fine question. Unlike many things in this world the companies like Kinedyne, Erickson and Cargo Smart all made the tracks the same size! So luckily for us we can use any of the e-track or x-track accessories like the Erickson E-Chock…

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

Yes, so long as you have a standard a-frame trailer you will be able to replace your current welded on coupler with the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K item #DM13205-95. I have attached…

From what I could find on the Dexter 072-042-00 leaf spring, it appears to be the standard 1-3/4 inch wide double eye spring which is 25-1/4 inches long and rated up to 1,750 pounds (per spring). With that said, the 4-Leaf Double-Eye Spring for…

Erickson has the spacing for the mounting holes of the #EM09160 before and after the chock at approximately 4-3/8" center to center. Since they unfortunately do not offer a custom backing plate the #e96RR you purchased is going to be the closest…

Self tappers like the part #SL99FR would work great as they have drill bits on the end which would make it through the metal of your studs and then attach.

While snap up brackets like the Replacement Hook Up Brackets for Curt Weight Distribution Systems #C17208 are somewhat interchangeable, I would still recommend using like branded brackets. The Pro Series weight distribution hitches are manufactured…

We likely have a toolbox which will work with your Aluma 548 trailer although A-Frame toolboxes are not made specifically to fit certain trailers so you will need to know the amount of room you have to fit the box. I do recommend going with a plastic…