Search: LM67010 > Trailer Bearings Races Seals Caps >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Rick, I’m happy to help. Based on your trailer having 4,400 lb Dexter axles, the bearing kit #DX86ER is what you would need for your trailer. This is the only bearing kit available for a 4,400 lb Dexter axle. What kind of trip are you prepping…
view full answer...Hey Ryan. We only have one hub that'll fit a straight spindle with 1-3/8" item #L68149 inner and outer bearings. It's the Dexter 9-3/4" Hub-and-Rotor Assembly item #DX82UR. This zinc coated hub and rotor assembly has a 5 on…
view full answer...Hi Kenneth! Since your 2023 Brinkley Z 3100 5th wheel has 7k axles, I recommend grabbing the Terran Axle Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 6-7K #TX77ZJ. These are priced very well, fit the standard 5 bolt pattern…
view full answer...Though we do have the replacement bearings, races, and seals available for your Hadco 3109 hub (which I have listed below), the combination used will not have an equivalent replacement hub available, unfortunately. Replacement Trailer Hub Bearing…
view full answer...Hey Brandon, thanks for the information! You are correct. The Dexter Bearing Kit item #DX86ER is exactly what you'll need if your Keystone Cougar has Dexter 4,400 lbs axles. This kit is designed to replace one hubs worth of bearings, races, seal,…
view full answer...Hey Mike, we do have a replacement hub/drum that works with the 3k rated Dexter brake assemblies part #K23-472-00 with the part #DX62KR.
view full answer...Hey Barry, it sounds like you're looking for the Dexter Electric Trailer Brakes #K23-472-473-00. These are Dexter brakes that measure 10" diameter x 1-1/2" wide, and are designed for 3,000 lb axles.
view full answer...Hey Don, thanks for reaching out! I checked out the owner's manual for your 2025 Traverse and according to page 258 it says "if equipped" and there are blunt cut wires that need to be spliced into. This means you'll need to hardwire…
view full answer...You can use the Timken Grease and Oil Seal #TMK98ZR in place of the Grease Seal #GS-2250DL. While they are not exactly the same seal construction it is still a double lip design and the dimensions are the same so they are going to fit correctly.
view full answer...I have added a link to a help article on everything you need to replace (or add) hydraulic drum brakes, but let's start with the actuator. What you need to know is the weight capacity you need, the hitch ball size you are coupling to, and the…
view full answer...I recommend the Electric Trailer Brake Kit #AKEBRK-7-D. The dacromet-coated backing plates are corrosion resistant which is ideal for a boat trailer. Both left and right hand sides are included with the kit. The Trailer Hub and Drum Assembly…
view full answer...The most common bearings and seals for a 7,000 pound axle are #25580 inner bearing, #14125A outer bearing, #25520 inner race and #14276 outer race. The grease seal can vary, and will usually either be the #GS-2250DL, which has a 2.250 inch inner…
view full answer...