Search: 7 way tester   >   Car Tie Down Straps   >  

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

It would be a good idea to add a support plate, like #BDSPB50, when installing A-frame jack #BD1550101344. The plate can be welded or bolted on. This plate fits on the underside of the trailer. The jack will then bolt into place. If you need a foot…

The Superwinch S7500 Trailer Winch #SW1475201 is designed to have more of a "universal" style for mounting and may require some adaption for installation because it does not have a typical mounting pattern. The Superwinch S7500…

First thing to check is to see if your truck's third brake light is still working when you hit the brakes. When the fuse for that circuit goes on GM trucks like your 2014 model it will prevent the brake controller from activating when the…

I haven't heard of the Curt 7-way tester not working with OEM brake controllers. There was a Tekonsha tester that had problems with Dodge and GM trucks so it is possible. We have been able to confirm that the Pollak 7-Way to RV Socket LED…

The center-to-center measurement of the Replacement Lens for Wesbar 80 Series Tail Light, #2423286 is 3-3/4" across the top and from top to bottom. Please note the attached image.

I might have an option for you but without more detail, like a photo, it would just be a guess. That said, the size you mentioned is pretty common more or less for square trailer tail lights like the Optronics Combination Trailer Tail Light part…

The Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR you were looking at will absolutely work in your 2021 Subaru Ascent, but how it is installed will depend on if your Ascent has the factory tow package or not. If your Ascent has the factory…

As long as you have a wiring harness like the Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers #331-TPH-007, I recommend making sure that all of the pins on your receiving connector are all connecting with the controller…

I can understand your hesitation about drilling a hole in your brand new dash, I'd be a little leery of that myself. If you have a smart phone, we have the perfect solution for you. Curt recently released the Under Dash Echo wireless brake…

The brake controller I recommend as the best for your 2020 Ford E-450 chassis is the Redarc Tow-Pro Elite Trailer Brake Controller part #RED44FR. This controller is very similar in design to the factory brake controller Ford would have installed in…

Sounds like you have a bit of corrosion on the brake output pin of the 7-way you have on your tow vehicle. Try cleaning the pin in the 5:00 position and should see that issue go away. When a trailer senses an amperage draw (which corrosion will…