Replacement for Old Trailer Square Tail Light 4-5/8" x 4-5/8"

Updated 04/27/2023 | Published 04/26/2023

Products Featured in This Question

Optronics Combination Trailer Tail Light - 6 Function - Incandescent - Red Lens - Passenger Side

(1251)

$9.36

Combination Trailer Tail Light - 7 Function - Incandescent - Square - Red Lens - Driver Side

(444)

$10.08

Question:

Have 2 broken Wesbar trailer lenses. It is 4 5/8 x 4 5/8. Also want 2 bulbs for it. Thank you

asked by: Dwayne O

Expert Reply:

I might have an option for you but without more detail, like a photo, it would just be a guess. That said, the size you mentioned is pretty common more or less for square trailer tail lights like the Optronics Combination Trailer Tail Light part # ST8RB for passenger or part # ST9RB for driver. If this is what yours looks like, I recommend using these as the two stud mounting pattern is pretty standard so don't get bogged down in the small dimensional differences.

In regards to a replacement lens for your existing, it's a waste of time as most of the older lights they don't make anymore. If you want to be able to get the right bulb you'd just have to remove the old style and either look for a bulb number on the base of the bulb or try to match it up with another, they are usually 1156/1157 for the tail lights.

I have attached our full selection of lights you can look through as well since you know what the light looks like and I do not.

expert reply by: Conner L