Result: 49913

Hello Jared, thanks for reaching out. Sadly, the trailer hitches for the 2024 Audi Q5 like the Curt #C98JR will not fit the sportback model. As you said, the back end is different. At this time there is no custom fit trailer hitch made for the…

While we don't have replacement parts for a Model LP70 actuator, we do have a great replacement solutions for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You…

We have the Titan version of the coupler you need as Titan Weld-On Coupler part #T1755000 which fits a 3 inch channel and is designed for a 2-5/16 inch hitch ball too.

Dico was actually purchased by Titan quite a while back. They did continue their line, however, and the Titan #T1755000 would be a good replacement option for the whole coupler end. That being said, if you just wanted to repair the coupler without a…

I have a great solution for using a weight distribution system with your new V-nose cargo trailer. I recommend using the Reese Chain Hangers #RP58305 with the weight distribution system you choose. These brackets can either be bolted onto or welded…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

As long as you stay under the 10,300 pound mark you should be fine. Currently your trailer and gear estimate would weigh 9,100 pounds. Take a look at the rig when the trailer and truck are fully loaded as though you were ready to hit the road. If the…

If you are experiencing a bouncy ride condition with your weight distribution system that indicates that you have a WD system that is rated too high for the tongue weight of your setup. If you use a system rated to high you end up with a harsh or…

The weight distribution system you use needs to be rated for the tongue weight of your 2017 Dutchmen Kodiak Ultra-Lite 283BHSL. The #RE94FR has a tongue weight range of 400-800 lbs and your dry tongue weight is 754 lbs so you will easily exceed the…

The Grand Design Imagine XLS 17MKE weighs in at 6,395 lbs fully loaded so for an appropriately sized weight distribution system, I recommend the Reese Pro Round Bar Weight Distribution part #RE94FR which is rated for up to 8,000 lbs. This system will…

I don't have any specifics on an International TerraStar but I do know a lot of these types of trucks use a 24 volt electrical system which will not work with most electric trailer brake controllers. However, we do have one that will work with 24…

We do have the correct spring bar retention clamp for your Reese Weight Distribution Hitch #RE44FR (which is the 49913). I checked with Reese for you, and they don't sell the clamp by itself, it does come with some hardware. If that's okay,…