Towing Capacity Limits for a 2010 Toyota Tundra
Updated 01/21/2021 | Published 11/11/2009 >
Products Featured in This Question
Question:
I purchased a 2010 Toyota Tundra V8 extra cab 5.7 with a towing capacity 0f 10,300 lbs. I purchased a new forest river 5th wheel w your 15000 lb cap. hitch. The trailer weighs 7900 lbs and I estimate 1200lbs of gear.Thanks
asked by: John
Expert Reply:
As long as you stay under the 10,300 pound mark you should be fine. Currently your trailer and gear estimate would weigh 9,100 pounds.
Take a look at the rig when the trailer and truck are fully loaded as though you were ready to hit the road. If the Tundra is sagging in the rear, I would suggest using some sort of suspension enhancement system. They spread the load to to more springs so there is a total of 4 points on the axle that weight rides on.
Timbren makes hollow rubber springs that mount to the truck frame and assist the factory suspension system. They spread the load to keep the truck level, and when going over bumps in the road they keep the truck from bottoming out. I called Timbren and the springs for the 2009 Tundra will fit the 2010 models. You would use part # TTORTUN4.
Continue Researching
- Search Results: pintle hitch
- Shop: Suspension Enhancement
- Video: Set up: Timbren Rear Suspension Enhancement System on a 2007 Toyota Tacoma
- Shop: Timbren Rear Suspension Enhancement System
- Video: All About the Timbren Rear Suspension Enhancement System-TTORTUN4
- Shop: RoadActive Suspension Custom Leaf Spring Enhancement Kit
- Shop: RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty
- Shop: Timbren Suspension Enhancement System - Severe Service - Rear Axle
- Shop: Curt Pintle Hook for 2" Hitches - 20,000 lbs
- Shop: Brake Controller
- Shop: Trailer Hitch
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 6,000 lbs
- Video: Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames Review
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Shop: Front Mount Hitch
- Search Results: k08~201~95
- Search Results: k23~105~00
- Search Results: k23~106~00
- Q&A: Will Dexter Hub Fit On An Axletek Backing Plate And Brake Assembly?
- Q&A: Comparing etrailer/AxleTek and Dexter Electric Brake Assemblies
- Search Results: 3 leaf trailer leaf springs
- Search Results: dexter trailer brakes
- Video: Comprehensive Review: Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Search Results: trailer leaf springs
- Q&A: Will Strait-Line Weight Distribution System Work On A-Frame Trailer With 4 Inch Frame
- Q&A: Trunnion Bars for Use in Reese Dual Cam and Dual Cam High Performance Weight Distribution Systems
- Shop: Trailer Wiring
- Q&A: Can the Reese Dual Cam RP26002 Work On Straight Spring Bars?
- Q&A: Will Any Reese Spring Bar Work with the Strait-Line Weight Distribution Systems
Scott B.
2/22/2020
I have 2010 Tundra Crew-max, tow package, 5.7 V8 rated at 10500 GVWR. I want to tow a Grand Design 295RL rated at 9995 GVWR, pin/hitch weight of 1391lbs... with addition of suspension enhancement and brake controller can I do this?