Search: 48349   >  

This is a great question. I called my contact at Progress Manufacturing (creator of Equalizer and FastWay Weight Distribution products) to pick his brain on this topic. He explained that weight distribution (WD) and sway control products rely on…

The connector you sent in a picture of is not the brake controller port. You would want to look for the female style plug that would match the connector in the picture I submitted. We have had customers state that the location of the brake controller…

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is the direct replacement for your Magnatek 7345 model. If you want to replace the converter and the circuit breaker box then the Progressive Dynamics Mighty…

When our installers replace a trailer hub, there isn't a set torque spec used when tightening the spindle nut. The hub is placed on the spindle, making sure the inner and outer bearings are correctly seated. The spindle nut is then run down until…

Both the LED Trailer Mini Clearance #MCL10AKB and Uni-Lite LED Clearance #MCL11RKB will require an 11/16" hole for mounting. These both use the same Grommet #A11GB.

The brake controller port on a 2021 Ford F-150 (if equipped) will be located behind the coin tray in the center console. This will be accessed by removing the panel under the steering wheel. I have attached a video which shows this below. For a brake…

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

The Reese Quick-Install Custom Base Rails part #RP56001-53 is an outboard kit and the Reese Quick-Install Custom Base Rails part #RP50066-58 is an inboard base rail kit. The difference between the two brackets is the position in which the bolts…

The rails you have in the bed of your truck that you have used an RBW Lil Rocker in are the same rail design as what current fifth wheel hitches are designed to fit. That means that the Reese fifth wheel hitch part #RP30047 that you referenced is a…

I do have an option for you but we don't have any rebuild kits per se for Titan Disc Brake Calipers. That said, we do have replacement disc brake calipers such as the Replacement Disc Brake Caliper part #K71-773-02 for passenger side or part…

I have attached for you below a few wiring diagrams for the Dometic DV4100 Roof Vent Fan which I have received from the manufacturer directly.

I spoke to Dexter and they said there is a bit of a process for installing the spindle nut properly. 1. You will need to thread on the inner nut, rotate the hub, then tighten the nut to 100 foot pounds. 2. Loosen the nut to remove the torque, making…