!Outback Wagon  x   >   !3500 Cab and Chassis  x   >   RC Manufacturing  x   >  

is the tool box strong enough to stand on? Do you ship to Canada? | The DeeZee # DZ91716 is constructed of .056 aluminum tread plate. Due to the fact that the box isn't very large, the box is pretty rigid but I wouldn't recommend standing on...

no more than 33 inches in the back 20 inches in the front 11 inches tall 14 inches front to back. better if it was not 14 inches like 10 inches front to back | The closest match we have to the dimensions you are looking for in an A-Frame toolbox...

What is the country of origin, and how good is the weather stripping on the lid? | The A-Frame Trailer Tongue Toolbox # 313-TM362016M is made right here in the United States of America, as you can tell by the photo of the cutout of the bottom...

Have a 32 foot flatbed trailer gooseneck that is 36 inches off the ground. THe crest of the hill and the bottom of the hill Distance detweenthe ground and box get smaller depending where you put it. Where would be the best placement underbody?...

Do you offer a box wider than 36 ? | We have the UWS A-Frame Trailer Toolbox part # UWS01065 which is 49 inches wide at the rear and 18 inches in the front. |

Do you make a box that can fit on the front of V-nose Aluma single axle enclosed trailer. I need a front box solution to hold network connections and power outputs and generator hookup. SO generally need it to be weather proof and would make...

How far does the lid open on this box? The video shows it will open a full 90 degrees but the still pictures show less than that. One of the reviewers said his did not open as far as shown in the video. I just returned one from Harbor Freight...

I am interested in getting a tongue box for the front of my trailer. I want to store two 20lb propane tanks in the box. The tanks are approx. 12in diameter and will need the box opening to be greater than 12. Thanks | Based on the dimensions...

A frame mount trailer tool box. need 44inch box. anything available? | We have many good choices in A-frame trailer type tool boxes you can see on the linked page. These include plastic, aluminum and steel models from well-known makers like...

Hi. Im trying to replace the tongue box on my Trail-et 2 horse trailer. The old box was destroyed by a falling branch. The replacement has to fit in a steel, trapezoid shaped frame at the front of my horse trailer. The inside measurements of...

of your different toolbox manufacturers, which one is the most heavy duty? Does one use heavier gauge material than the others? I am looking for a toolbox for 10 Ton heavy equipment trailer and it needs to be strong and stout. | If you're...

Measurements overall | The overall dimensions of the # 3W-461-545-SSL-EP is 3-3/8" wide by 4-3/8" tall. The mounting holes at the top are 2-13/16" apart (green), the holes from top to bottom are 2-15/16" apart (blue line) and the bottom holes...

i am looking for a metal box that measure 16 to 24 in long by 12 in deep and at lest 12 in tall. | The closest box we have to the measurements you are looking for is DeeZee box, # UB1416-24. It is 24 inches long, 14 inches tall, and 16 inches...

What is the thickness of the metal in inches, i.e., 1/16, 1/8, 1/4, 3/8, etc. Is it aluminum tread plate? Thanks. | The RC Manufacturing A-Frame Toolbox, # 350975, is made of .072 inch thick diamond tread plate, which converts to slightly...

I want to mount a trailer tongue box yet to be purchased to my steel tailer frame. I was thinking stainless steel u-bolts I understand galvanic action and I can isolate the different metals with nylon spacers as I live on the Florida coast...

What is the thikness of the material to form the box? Is this product made in the USA? Thank You | The Underbody Truck or Trailer Toolbox, 36x18x18, item # UB1818-36, is constructed of minimum 14 gauge steel and in some places uses 13 gauge...

Looking for a recommendation for a tongue mounted tool box for my Big Tex 60pi. | How large of a toolbox are you looking for? These toolboxes are not custom fitted, so there are going to be a lot of options as far as height, depth and cubic...

What is this thickness of the aluminum RC 301414? | The RC Industries Cargo Box, part # 350970 that you referenced is constructed of thicker aluminum tread that is .072 of an inch. I attached a review video for this box for more info on it as...

With regards to RC Manufacturing 350970 and UWS UWS04530 aluminum tongue trailer tool boxes, which one is better quality? The RC Manufacturing tool box seems to be heavier and with a thicker grade aluminum. I live in Moncton, New Brunswick Canada. Just...

How does this toolbox mount to the brackets? Are there holes pre-drilled in the bottom or back of the toolbox through which to put bolts? Or do I need to drill my own holes in the toolbox? Or does it weld on? | The brackets you use to install...

Do you have just parts to a compression latch? I just need the cam part. Thanks. | Hey Will, thanks for the photo! That cam part on the Replacement Compression Latch # 313-8-325-281 unfortunately isn't something that the industry makes - for...

I am looking for a a frame toolbox for my Suretrac Utility Trailer. My Dimensions are front long 25”, back long 41”, and wide 15”. | Although none of the trailer tongue toolboxes we offer precisely meets the measurements you provided, we have...

Do you sell the 30inch x 18inch x 18inch underbody box with the textured finish and stainless steel door. I think RC calls the textured granite finish .it looks like line-x you see in the beds of pickup trucks | Yes we do, for the 30 inch x...

What is the gauge of the metal used on the box? | The RC Industries Z-Series Underbody Truck Toolbox you mentioned, part # UB1416-24 is constructed of 14 gauge powder coated steel. The T-Handle is constructed of stainless steel. |