!Cherokee Alpha Wolf Travel Trailer  x   >   !Integra  x   >   SeeLeveL  x   >  

Will the sensors work on a fiberglass holding tank? If not, can you recommend a sensor that does? | Yes, the SeeLeveL RV Holding Tank Monitoring System # SE39VR will work with a fiberglass holding tank. If you check out the linked installation...

What is the output voltage on the sensors? | The SeeLevel Sensor part # SE27VR that you referenced runs on 12 volts. |

Do you carry SeeLevel brand monitor p/n 709-2P? | Yes we do carry the SeeLevel 709-2P with our part number # SE94VR. This is just the monitor you are looking for. The part # SE49VR that you mentioned includes the monitor but also sensors. |

The sea level sensor would it work with a standard monitor that has readouts by the 1/3 or do I need to add or replace my present monitor? Thank you | The SeeLevel systems will require you to replace your current monitor in order to properly...

There is no direct discussion for hooking your system to an electrical power source. Am I to assume that two wires must be run ro one of my chassis batteries? | The SeeLeveL RV Holding Tank Monitoring System, # SE39VR operates from a 12 VDC...

Im looking at the Seelevel sensor mounting on my water tank. Is this suitable for a tank mounted underneath the van? Thanks. SeeLeveL SE27VR | Yes, the SeeLeveL Sensors # SE27VR can be used on a tank mounted under a van. You'll just want to...

i have a 43 Defever trawler boat. i have 2 150 gal freshwater tanks, about 36 inch tall. can you stack sensors more than 2 high? will the sensors work on steel diesel tanks? | The SeeLeveL sensors can be stacked 2 high at the most, like what...

Can the monitor be used on a stainless steel tank? | I went ahead and checked out the SeeLeveL Sensor for RV Holding Tank Monitor # SE78VR and unfortunately they are not going to be compatible with metal tanks. These sensors will work on most...

Can SeeLevel sensors be used on external mounted tanks that exposed to water and all road dirt? | Yes, the Seelevel sensors like the part # SE78VR can be used on external mounted tanks exposed to water and roads like you asked about. |

Can the Seelevel Model 709-4 sound an audible alert when a tank is full? | The SeeLeveL RV Holding Tank Monitor part # SE84VR does not have any sort of built-in speakers so it will only display visual alerts. Therefore, you'll need to press...

I need a wiring diagram for a seelevel SE94VR system. I bought from trailer and it didn’t come with instructions or wiring diagram | Hi John, I'm sorry you weren't given a set of instructions to go along with your SeeLevel RV Holding Tank Monitor...

I have a tank that is a 12 inch piece of transparent, schedule 40 PVC pipe, with caps on both ends, etc. I am looking for a way to measure the level of this tank so that I can open a valved on the bottom to let it drain. The content of the tent...

Hey, does this show the percentage always, or does the screen go black when you arent using it? Constantly trying to reduce lights in the van, so Id prefer it wasnt always lit | The SeeLeveL RV Holding Tank Monitor # SE94VR shuts off after just...

Can this sensor be used in fresh and black water on marine/boats? Bayliner? | Yes, the SeeLevel part # SE78VR can be used on the water tanks of a boat as well. |

SEELEVEL SENSORS 710-AR When stacking the sensors do you have to cut the tab on both sensors or just one? | Per SeeLevel, for a stacked configuration of the SeeLeveL Sensor for RV Holding Tank Monitor - 9" Long # SE88VR you just cut the top...

Looking for a meter to tell how much water we have consumed in our RV. We are dry camping and need to conserve the water in our fresh tank. The sensors in the RV are simply 3 lights. I would love to have something that shows gallons consumed,...

Do you carry the SeeLevel 709-N2K-NLP? This is the display that has the NMEA2000 interface. Thank you, | That part number corresponds with a SeeLevel system that has sensors for a fresh, gray, and black water tank like the part # SE39VR but...

I am trying to connect this and have no wiring diagram. I have created my own of what I did, and it’s not working. Do you have a wiring diagram for this? I bought it from etrailer a couple of years ago and have never been able to get it to work....

Does the SE84VR model include the sensors for all four tanks? | No, the SeeLeveL RV Holding Tank Monitor # SE84VR does not include the sensors. The sensors are sold separately. - SeeLeveL Sensor for RV Holding Tank Monitor # SE78VR (12") -...

Concerning See Level sensors, have you tested sticking the full sensor strip on a diagonal to a shorter tank. If it works it will show a finer reading using more of the graduations. Like laying a 12inch ruler slanted on a 1x4 board, if you mark...

2022 RENEGADE VERONA 40VBH: CONSIDERING THE PURCHASE OF A SEELEVEL SYSTEM FOR OUR COACH AND NEED SOME GUIDANCE FROM THE EXPERTS: 1IS THE ONLY DIFFERENCE BETWEEN THE MODEL SE39VR and SE33VR THE BLUETOOTH CAPABILITY? 2WILL EITHER OF THE TWO...

Re Rhino Blaster Pro: We do not have a straight shot on our black water line. Because of the turns, the spray will likely not get the line entirely clean. We can probably fill the black water tank, but is there a danger in it being overfilled?...

Is this available in a kit with the sensors or do I have to get those separately? | Yes, to get the SeeLeveL RV Holding Tank Monitor # SE34VR with the sensors you need the SeeLeveL RV Holding Tank Monitoring System # SE59VR. This comes with...

I am looking to put in the replacement holding tank sensor system. I have a a 2022 Alliance RV Paradigm 5th wheel 35 ft. Which sensor system should I get? | This really depends on if your 2022 Alliance Paradigm has an RV-C, multiplex wiring...