Ball Mounts   >   Fixed Ball Mount  x   >   Sonic  x   >  

The RP7043000 comes with the ball mounted in the rise position. If I want to flip the ball mount | The RP7043000 comes with the ball mounted in the rise position. If I want...

hitch, part number 24878. I want to verify that this ball mount will clear the rear bumper in the rise | What is the length from the pin hole to the edge of the vertical flat bar that is closest to the pin...

a link to the installation instructions for you to view. The recommended ball mount is # 3590. If you | I wanted to know if this will work on a hatchback ? | For your 2012 Chevy Sonic hatchback you can use...

recommend Draw-Tite model # 24878. The recommended ball mount is # 3590. For a 1-7/8 inch ball I recommend | I need to know which trailer hitch would work best on my car. My motorcycle weighs...

mount. To complete your towing setup you may also be interested in the 1-7/8 inch hitch ball part | I am concerned about the muffler hitting the hitch and the paint burning off. | If installed according to...

then want the part # 118640, for a ball mount # 3590, 1-7/8 inch ball # 19256, and 2 inch ball # 19258. | I have a 2015 Chevy Sonic hatchback. Im moving this spring and need...

owners manual to determine if the vehicle can be used for towing. If so then the correct ball mount | Is any drilling or special tools needed? How long does installation take? Does anything need to be removed...

are planning on doing some light towing with your Sonic I recommend a ball mount like part # C45019. This ball | I cant figure out which hitch to purchase for my 2012 Chevy Sonic. I see there...

ball mount is # 3590 and the correct pin and clip is # PC2. For a 1-7/8 inch ball use # 19256 | does this hitch fit a 2013 sonic hatchback | The Draw-Tite hitch # 24878 is a confirmed fit for...

Mount - 2" Ball # C19745. However, if you are looking for an option that doesn't require drilling | Can I attach the brackets to my 2015 Chevy Sonic LTZ without fabrication? | In order to mount the Universal...

. For a ball mount use # 3590. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. For trailer | Im interested in this hitch. Will it fit a 2013 Sonic RS though? | I checked with...

owners manual to make sure it is permissible to do so with your Sonic. If so then the correct ball mount | Will it fit on a Sonic 2014 Sedan? THanx in advice! | Yes, Curt trailer hitch # C11240 will fit your...

's a ball mount towing a trailer or a hitch accessory like a cargo carrier in your case. You also have | I recently purchased item 24878 for my 15 Sonic RS. It is rated at 2,000 gross weight and 200 tongue...

be used with ball mounts or hitch accessories that have a hollow shank. The block and the spring must | Hi i bought a hitch from you hidden hitch part# 60295 i had bought a lock pin for the hitch and the pin...

Cam Buckle Stabilizing Strap # 18050 is required for hitch mounted accessories such as a Thule | Hello, Would like to know which Hitch would fit my Sonic Sedan LT 2012? | The Curt Trailer Hitch Receiver # C11240 is the correct...

fit as well. For a ball mount you'd need the part # 3590, and for a ball # 19256. | Hello! I happen to own a 2012 Chevy Sonic LTZ Hatchback with the 1.4L Turbo 6-spd manual transmission. I...

. The recommended ball mount is # 3590. Then for a 1-7/8 inch ball I recommend # 19256 or for a 2 inch ball I | Hi im planning on getting a new exhaust for my car but might...

to check out as well. Since you plan on doing some towing the correct ball mount is # 3590 | Hi.. I have a question about your product.. I have a 2012 sonic and am wondering which hitch i need to haul a...