!Pleasure Way  x   >   !Weigh Safe  x   >   RC Manufacturing  x   >  

Will the self tapping screws hold the box on a aluminum trailer | Yes, self-tapping screws will hold the RC Manufacturing T-Series Trailer Tongue Tool Box # 350970 on your aluminum trailer. |

With regards to RC Manufacturing 350970 and UWS UWS04530 aluminum tongue trailer tool boxes, which one is better quality? The RC Manufacturing tool box seems to be heavier and with a thicker grade aluminum. I live in Moncton, New Brunswick Canada. Just...

I’m looking for a toolbox for my trailer, a frame, what ions do you have and what price range? | There are quite a few options when it comes to tool boxes for an A-frame trailer, and it will come down to how much room you have to work with,...

I am looking for a a frame toolbox for my Suretrac Utility Trailer. My Dimensions are front long 25”, back long 41”, and wide 15”. | Although none of the trailer tongue toolboxes we offer precisely meets the measurements you provided, we have...

Good morning I am looking for a A frame box to mount on my retro 1978 Boler trailer, woul like it to hold 2 Interstate 6-volt golf cart batteries and the propane tank can you suggest a product you have Thanks | I recommend starting off by...

Does this tool box bolt to the trailer, or does it require welding? | The RC Manufacturing T-Series Trailer Tongue Toolbox - A-Frame - Steel # 313-TM362016M is just the steel box. Most people drill into the bottom of the box to hold the box...

does it (# 350980) fit on the tongue of a big tex 20 foot tilt trailer. enough room for the spare tire location | The A-Frame Trailer Tongue Toolbox # 350980 will fit on an A-frame trailer where the frame measures 17-1/2 inches edge to edge...

I have a HandH aluminum trailer with square tube tongue rails. How do I mount to the rails since I dont want to drill all the way through the tubes? | Since you are not wanting to drill all the way through the aluminum frame on your H and H...

Hi, looking for a trailer tongue box. The back side needs to be 36inch wide and the front 24inch wide and from the back to the front 12inch or 15 Thanks | The closest box we have to the dimensions you gave is the RC Manufacturing T-Series...

no more than 33 inches in the back 20 inches in the front 11 inches tall 14 inches front to back. better if it was not 14 inches like 10 inches front to back | The closest match we have to the dimensions you are looking for in an A-Frame toolbox...

How do you recommend fastening this box to the a-frame of trailer? | There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item # 350970, due to the different construction and mounting locations that may be...

I need to know the size of the height and width Im looking for one 5 in tall and four and three quarter inches wide | The Replacement Compression Latch # 313-8-325-281 for the RC Manufacturing Z-Series Truck or Trailer Underbody Tool Box # UB1818-36...

I am looking for a tool box to put on the back of my trailer. 48x12x12 Where do I buy one and what kind of mounts do I use? | We don't have anything that is the exact dimensions you mentioned. We have the RC Manufacturing Z-Series Truck or...

I am looking at several different utility trailer A-Frame style tool boxes for the front of my trailer. One I looked at is MaxxTow brand MT80349. Can you tell me where it is made? I like the RC Manufacturing box as well and it is made in USA....

A frame mount trailer tool box. need 44inch box. anything available? | We have many good choices in A-frame trailer type tool boxes you can see on the linked page. These include plastic, aluminum and steel models from well-known makers like...

How far does the lid open on this box? The video shows it will open a full 90 degrees but the still pictures show less than that. One of the reviewers said his did not open as far as shown in the video. I just returned one from Harbor Freight...

of your different toolbox manufacturers, which one is the most heavy duty? Does one use heavier gauge material than the others? I am looking for a toolbox for 10 Ton heavy equipment trailer and it needs to be strong and stout. | If you're...

What is the weight of this box, and how much does an aluminum box of the same size weigh? Thanks. | The DeeZee 6 cubic foot # DZ91717P toolbox you'd looked at weighs about 25 lbs minus its shipping packaging. We don't offer an aluminum box...

Hi I wanted to see if this size and style tongue box comes in aluminum Diamond plate of if you can find me another brand in these measurements and style. This is the one I was looking at. But don’t want steel or black.. MaxxTow MaxxHaul...

How does this toolbox mount to the brackets? Are there holes pre-drilled in the bottom or back of the toolbox through which to put bolts? Or do I need to drill my own holes in the toolbox? Or does it weld on? | The brackets you use to install...

What is the gauge of the metal used on the box? | The RC Industries Z-Series Underbody Truck Toolbox you mentioned, part # UB1416-24 is constructed of 14 gauge powder coated steel. The T-Handle is constructed of stainless steel. |

Hello. Side-mounted spare tire carrier for a 2019 Aluma 6810ESW trailer, ie, to bolt through the low sidewalls. If possible, I dont want to use the frame locations, which on this trailer are strictly on the tongue. Any suggestions would be...

Looking for a recommendation for a tongue mounted tool box for my Big Tex 60pi. | How large of a toolbox are you looking for? These toolboxes are not custom fitted, so there are going to be a lot of options as far as height, depth and cubic...

How is it mounted? Do I need to drill holes or weld? Nothing shows how to. Not a big deal, just wondering. | There isn't one set in stone way to install the RC Manufacturing T-Series Trailer Tongue Toolbox # 350980 but typically people will...