Ford  x   >   Explorer  x   >   2010  x   >  

My ladder now is about 105 inches long, do have any that long for a George of 2000. | The longest ladder that we have is the 99-1/2" ladder from Stromberg Carlson. This comes in Silver # LA-401 as well as Black # LA-401BA and has a customizable...

What mirror is the best fix for a 2010 Ford explorer xlt | I would be happy to find some towing mirrors that clip onto your factory mirrors but if you are trying to replace your stock mirrors we do not offer any for your 2010 Ford Explorer XLT....

Hi - I have a 2010 Ford Explorer 4.6 v8, with Sway Control option. GVWR: 6280 GCWR: 12000 Curb: 4628 Payload: 1652 I am towing a 2015 Aspen Trail Mini1500BH trailer. GVWR: 3800 Dry: 2975 Cargo: 825 Hitch: 357 Trying to determine the expected...

Is this kit compatible with Aries Grille Guard model 3059 black or 3059-2 polished? | The Aries Grille Guard # AA3059 does fit your 2010 Ford Explorer and the appropriate Replacement Bracket and Hardware Kit is part # AABRKT-3059. Aries Replacement...

With #31545 Curt front mount trailer hitch receiver will I have to trim any bumper parts on my 2010 explorer xlt ? Thanks | There is no drilling, cutting or modifying of any of the parts on your 2010 Ford Explorer XLT for installation of the...

On 2010 Expedition EL, w/ existing 4 pin plug, will this kit be a one/one replacement? or does other wiring have to be done. HD tow pkg is NOT installed. Thanks. | The 2010 Ford Expedition should have a round connector at the rear of the vehicle...

My husband passed away in January. We always loaded our bikes as a team. I am not able to load my bike by myself. I have a 2-bike Thule rack, but I need a 1-bike rack that has a lift or ramp that will assist me in getting my heavy Giant brand...

Since the car has power brakes, does the motor have to be running when towing? | No, the vehicle motor will not need to be running while towing the vehicle in order for the brakes to work. When checking the owners manual for an Explorer, I...

Where do I find the wiring to connect my control unit to? I have a factory installed type III/IV towing package on my truck. Will it be located under the dash? How do I recognize it....special color or configuration? 2010 ford explorer...

Do you sell a CIPA towing mirror that will fit a 2010 Ford Explorer? | We do carry CIPA towing mirrors that will fit a 2010 Ford Explorer. There are three different mount styles available - clamp-on, clip-on, and door mount. The clamp-on style...

In the video he mentions a tire size of 205 75r 15 , but that size is not listed , so will this work on 205 75r 15 ?? | Hey there Robert, thanks for the question and even though it is not listed, a 205/75-15 tire is absolutely compatible with...

2010 Ford Explorer Mine is a four door model with the large spare tire and class 2 hitch all ready made on the frame will the Curt part # 13112 fit on corectly with the full size spare tire. and if not what hitch will ? | Yes, the Curt Class...

My 2010 Ford Explorer has very limited space and the lock must have a side entry for the 5/8inch pin because there is no room to a key into the end of the most common locks. I purchased a side load lock, but there is a bolt head behind the...

We are considering the Hollywood Sport Rider SE for transporting a RadWagon electric cargo bike. Because my wife has trouble lifting heavy weights is it possible to tilt this unit down to reduce the height for loading and then tilt and lock...

Which Roof Mount Ski and Snowboard Racks Fit a 2010 Ford Explorer with Factory Crossbars, and can they be used to transport fishing rods? | There are several ski/snowboard carriers that will fit the factory roof rack on your 2010 Ford Explorer. From...

I just purchased a camper, and the dealer did not have a footplate that would fit because of the indent on the stand itself. Can you tell me if it will fit this particular jack? It seems to have the same indent, Im just not sure if it will...

Can you tell me if this cargo rack is compatible with a 2010 Ford Explorer. If so, does it allow room to open the lift gate while installed? If not, can you recommend something that does fit the above criteria? | By taking a few measurements,...

We have a GCH 6 Atwood. We would like to replace it with the same features. Ours has a heat exchanger on the back. Could you tell us the part number? 6 gallon, DSI, propane and 120v. | The Dometic RV Water Heater part # DMC74FR would be...

We need a 8 inch drop to pull a utility trailer. Can we use an adaptor without decreasing tongue weight we can tow? | I have a couple of different options for you to use with your 2010 Ford Explorer that will give you the 8 inch drop that...

Which oil coolers will fit on a 2013 Ford Explorer with a 3.5 liter engine? | I did some checking and it looks like the oil filter threads on your 2013 Ford Explorer with a 3.5 liter engine are M22x1.5 mm, so you are going to need an oil cooler...

Hi, I want to install my tekonsha prodigy brake controller to my ford explorer. I have the correct wire harness that attaches the controller to the ford factory harness, however, there is no power. Thank you for your help. | The fuse for the...

I have a 2010 Ford Explorer and a 2013 Subaru XV Crosstrek both have factory installed roof rails, I and am interested in the Thule Wingbar EVO roof rack with the clamp on feet to mount a Thule Dock Grip kayak rack. Are the Wingbar EVO kits...

Why must the ball mount, #C45014, be used only in the rise position and not in the drop position? | I spoke with my contact at Curt and he said the Class II Drawbar, # C45014, has not been tested for use in the drop position. They only test...

Will this hitch carrier #c18145 work well on a 2010 Ford Explorer? | To determine if the Curt 20x48 Cargo Carrier will work with your Explorer, you will need determine if there is enough clearance at the rear of the vehicle. You will need to...