Will Trimax Trailer Wheel Chock and Lock TMX75FR Fit 205/75-15 Tire

Question

Question:

In the video he mentions a tire size of 205 75r 15 , but that size is not listed , so will this work on 205 75r 15 ??

asked by: Robert

0

Expert Reply:

Hey there Robert, thanks for the question and even though it is not listed, a 205/75-15 tire is absolutely compatible with the Trimax Trailer Wheel Chock and Lock # TMX75FR.

expert reply by: Kyle S

0

Answer 1

Hello Tyrone, thanks for reaching out. We do carry the Trimax locks, but I am sorry to say that we do not offer replacement keys for them. You may be able to contact the manufacturer directly to get new keys, or you might be able to have a locksmith…

view full answer...

Answer 2

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 3

It sounds like the shock is worn out in your coupler and it is no longer functioning as a dampener to allow the coupler to return slowly and that is the clanking sound you are hearing. I attached a page that shows all of the different actuator shocks…

view full answer...

Answer 4

The etrailer Trailer Wheel Lock, part #288-02020, will fit your UTV provided its tires are between 6-3/4" -10-1/2" wide. Another option is the Trimax Trailer Wheel Chock and Lock - 12 - 16-1/2" Wide Tires, part #TMX62ZR, which can fit…

view full answer...

Answer 5

I'll go ahead and list out below all the tire sizes that are compatible with the Trimax Trailer Wheel Chock and Lock - 12" to 15" Wheels #TMX75FR: - 4.80-R12 - 195/75-R14 - 205/60-R15 - 205/70-R15 - 215/70-R15 - 225/75-R15 - 235/75-R15

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

Hi JD; if I had to choose between the Leer Hard Tonneau Cover #LE67FR and BAKFlip MX4 #BAK448133 I would go with the MX4. As far as security goes both are locking covers so it will be about the same between the two. The MX4 has seals and drain tubes…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will Trimax Trailer Wheel Chock and Lock TMX75FR Fit 205/75-15 Tire

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching