Oil Cooler Recommendations for a 2013 Ford Explorer with a 3.5 Liter
Which oil coolers will fit on a 2013 Ford Explorer with a 3.5 liter engine? | I did some checking and it looks like the oil filter threads on your 2013 Ford Explorer with a 3.5 liter engine are M22x1.5 mm, so you are going to need an oil cooler...
Using Quick Connect Wiring Harness On 2008 Ford Explorer Sport Trac With Factory Tow Package
where is the plug under the dash to install a time delay brake controler | The custom wiring adapter you can use for your Explorer is the Curt Custom Wiring Adapter, part # C51322. This will easily plug into the vehicle wiring harness under...
Brake Controller Install Location on a 2008 Ford Explorer
what is best way to install on a 2008 ford explorer. there is not much to attach to nor is there much room Velcro??? | A brake controller should be installed as the manufacturer recommends, by using the provided bracket. Typically a brake controller...
Could Hitch from 2000 Ford Explorer Fit 2008 Ford Explorer
I have a hitch off a 2000 ford expedition and was wondering if I can bolt that up to a 2008 ford explorer? | Those vehicles are very different so a new hitch fit would be required like the Curt part # 13112 for the 2008 Ford Explorer. |
Troubleshooting Air Lift Air Bag Kit with Slow Leak
Hi I it works great but unfortunately one side down not work it has a leaking I think stays in 19 psi and the other holds 35 psi, there’s any way you can send me more hose at least for one side and new clips and fasteners , i can pay just let...
Will CURT Hitch Cargo Carrier # C18145 Fit a 2008 Ford Explorer and Be Able To Open Rear Hatch
Will the C18145 carrier fit my 2008 ford exployer? 1.25 hitch is on it. can i open the back of the suv with it installed? | The CURT Hitch Cargo Carrier, part # C18145, will install on a Class I 1-1/4 inch hitch and a Class II 1-1/4 inch hitch....
Recommended Hitch-Mounted Platform Style 2 Bike Carrier For 2008 Ford Explorer Sport Trac
Does this one definitely fit my sport trac 2008 and is it easy to take off and on. I am a 64 year old woman and not as strong as I used to be. I would be taking mostly one womans bike and need to remove the rack each time. Thanks. | You will...
Noise-Reducing Wind Fairing For Thule Square Bar Roof Rack on 2010 Ford Explorer
I have a Thule 450 rack with square cross bars on my 2010 Ford Explorer. I’d like to get a wind fairing to cut down on the noise from the rack. Do you know what size or kit would work? Thanks | On your 2010 Ford Explorer Thule specifies 50-inch...
Thule Wingbag Evo Roof Rack that Fits 2010 Ford Explorer and 2013 Subarou XV Crosstrek
I have a 2010 Ford Explorer and a 2013 Subaru XV Crosstrek both have factory installed roof rails, I and am interested in the Thule Wingbar EVO roof rack with the clamp on feet to mount a Thule Dock Grip kayak rack. Are the Wingbar EVO kits...
Transmission Cooler Recommendation for Bypassing Factory Cooler of 2008 Ford Explorer
2008 ford explorer 4.6 v8 4x4 i doubt ill ever tow with it but you never know. i would like to by pass the rad. and just run a trans cooler,the rad.has leaked into the trans cooler once already.dont want that nightmare again. | It is possible...
Best Towing Mirror for a 2010 Ford Explorer XLT
What mirror is the best fix for a 2010 Ford explorer xlt | I would be happy to find some towing mirrors that clip onto your factory mirrors but if you are trying to replace your stock mirrors we do not offer any for your 2010 Ford Explorer XLT....
Will Trimax Trailer Wheel Chock and Lock TMX75FR Fit 205/75-15 Tire
In the video he mentions a tire size of 205 75r 15 , but that size is not listed , so will this work on 205 75r 15 ?? | Hey there Robert, thanks for the question and even though it is not listed, a 205/75-15 tire is absolutely compatible with...
What are the Dimensions of the CURT Trailer Hitch Mounted Accessory Step # C31001
What are the deminsions of this step | I spoke with my contact at CURT and he stated that the Step, # C31001, is 6-3/8 inches front to back and 10-3/4 inches wide. I have made a picture showing these dimensions for you. |
Location of Factory Brake Controller Plug on a 2008 Ford Explorer
location of factory brake controler plug? | If you have the factory 7-way connector on your 2008 Ford Explorer the factory brake controller plug will be located behind the glove box on the left side. You will open the glove box, push in the...
Can the Rear Hatch of a 2010 Ford Explorer Open with the Reese Cargo Carrier # 63155 is Installed
Can you tell me if this cargo rack is compatible with a 2010 Ford Explorer. If so, does it allow room to open the lift gate while installed? If not, can you recommend something that does fit the above criteria? | By taking a few measurements,...
Where Is Factory Brake Controller Plug Located On 2010 Ford Explorer Sport Trac
Where do I find the wiring to connect my control unit to? I have a factory installed type III/IV towing package on my truck. Will it be located under the dash? How do I recognize it....special color or configuration? 2010 ford explorer...
Is Trimming Required for Installation of the # 31545 Front Mount Hitch on a 2010 Ford Explorer XLT
With #31545 Curt front mount trailer hitch receiver will I have to trim any bumper parts on my 2010 explorer xlt ? Thanks | There is no drilling, cutting or modifying of any of the parts on your 2010 Ford Explorer XLT for installation of the...
Recommended Bike Rack With a Ramp for E-Bike
My husband passed away in January. We always loaded our bikes as a team. I am not able to load my bike by myself. I have a 2-bike Thule rack, but I need a 1-bike rack that has a lift or ramp that will assist me in getting my heavy Giant brand...
Recommended Trailer Hitch Receiver For 2008 Ford Explorer
I dont want a scab on hitch, it makes my connection point too low. Im looking for an oem replacement. I have a 2008 ford explorer, and it comes with a 1inch hitch. I want to remove that and replace it with a 2. Do fabricate oem replacement...
Locking Hitch Pin for Factory Trailer Hitch on a 2010 Ford Explorer
My 2010 Ford Explorer has very limited space and the lock must have a side entry for the 5/8inch pin because there is no room to a key into the end of the most common locks. I purchased a side load lock, but there is a bolt head behind the...
No Power To Brake Controller With Plug-In Harness On a 2010 Ford Explorer
Hi, I want to install my tekonsha prodigy brake controller to my ford explorer. I have the correct wire harness that attaches the controller to the ford factory harness, however, there is no power. Thank you for your help. | The fuse for the...
Will the Curt Class lll Trailer Hitch for 2010 Ford Explorer Fit with Factory Hitch and Spare Tire
2010 Ford Explorer Mine is a four door model with the large spare tire and class 2 hitch all ready made on the frame will the Curt part # 13112 fit on corectly with the full size spare tire. and if not what hitch will ? | Yes, the Curt Class...
Cargo Carrier Recommendation for a 2008 Ford Explorer
We have a 2008 Ford Explorer and I was hoping to buy my husband a cargo carrier for xmas. I have no idea what to get or what I should be looking for. | The first thing you need to determine is if the Explorer has a hitch installed. If there...
Parts Needed to Add a 7-Way Trailer Connector and Brake Controller to a 2008 Ford Explorer
I have a 2008 Ford Explorer with an OEM 4 way tow package. I had previously installed a Curt 2 inch receiver for use with my tent trailer. The tent trailer has been recently replaced by an 18 foot dual axle travel trailer and I now need to...
Filter Your Search
Contact and Help