Result: knobs

The Spectrum # C25SV uses a standard knob to monitor and adjust the controller while the Echo Under-Dash # C47YV mounts under your dash and you use an app on your phone to monitor and adjust things. | Hey, I have a 2007 GMC...

The sensitivity settings are a bit more clearer on the # RM-8700 since you're using a psi gauge versus the knob on the G-force controller of the # DM86VR that has no indicators on it, besides "More Sensitive" and "Less Sensitive". |

The on-demand hot water and ability to set the temperature to a specific degree instead of the old fashioned arrow knob will make camping much more enjoyable. The # FR98SR has the following requirements to properly operate: 12VDC Power Input. 7.2-65PSI water Pressure (40-50PSI recommended). |

The RV Rider item # HLY64FR uses padded clamps with hand knobs that secure your bikes by the frame or seat post. | I have a Specialized 3.0 Cumo E Bike and am looking for a bike rack for my SUV/Class C motorhome that has easy...

You'd adjust the controller via the small control knob that can be mounted to the dash or center console using an un-used switch knockout or a universal fit bezel, part # 331-TPSI-001. | I JUST PURCHASED A 2022 NISSAN PATHFINDER...

The on-demand hot water and ability to set the temperature to a specific degree instead of the old fashioned arrow knob will make camping much more enjoyable. The # FR98SR has the following requirements to properly operate: 12VDC Power Input. 7.2-65PSI water Pressure (40-50PSI recommended). |

If you don't, I recommend the Redarc Tow-Pro Liberty part # RED52VR which is a knob that installs straight into your dash! It will work with trailers that have up to two axles and electric or hydraulic brakes. | I’m looking...

Determine where you want to mount the brake controller knob on the dash. The control box can be mounted anywhere under the dash, in any orientation, it just has to be mounted to a solid. | Hello, I am looking to purchase the...

If the rear hardware works for the front even though it is long, it may be the best option. You will need two knobs, part # 753-0783; one plastic spacer mount, part # 853-7441; one rubber leveling gasket, part # 853-7442; and two 6 x 80 carriage bolts, part # 915-068-054. |

The main unit for this brake controller installs behind the dash, with only the control knob showing in the cab of your motorhome. You would then need the Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers # 331-TPH-005 for installation using the factory port. |

I like the Tow-Pro Liberty because of its unique installation method where the only visible portion is the control knob that's about the size of a nickel. The main unit is hidden away inside your dash to be completely out of the way and out of sight. |

The main unit will install in an out of the way space of your choosing, and then the control knob will be the only visible part, again installed in a place of your choosing. | Hello - just bought new 2022 Yukon but it does...

If it had one you'd most likely see it's display or button/knobs on the dash of your vehicle. First let's start with a brake controller. | My new Discovery came with a tow package. It is pre-wired with a 4 pin and 7 pin adapter....

This unit can produce 144 gallons of hot water an hour and has a thermostat that will allow you to change the temperature by the degree instead of just a knob with an arrow saying hotter or colder on it. | Hi, I am looking...

This means you will be able to change the power to your brakes at the control knob which you can mount wherever you like in your F-350. | I live in Colorado. I am looking for a brake controller for my 1991 F-350 which is...

There are a few other similar brake controller styles, but this is the only one that has a digital readout on the control knob so that adjusting the brakes doesn't require remembering what colors or flashing lights mean. |...

I verified with Redarc that the correct parts are the following: - Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR - Plug-and-Play Wiring Harness # RED49FR - Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 The thing the Tow-Pro Elite does better than any other controller is give you control. |

Make sure the controller is mounted within its range as indicated in the instructions, linked for reference, and that the gain and leveler knob are set properly. I have seen controllers do strange things when the leveler is not quite right. |

I have a probe/clip/light tester circuit and a voltage tester with the black/red probes, and box with a dial on the side and a knob with different settings on the front. Will either of these items work? | How is checking a...

The main unit for this controller hides behind the dash with only a small control knob on the dash to adjust the brake force. For you 1997 Coleman Fleetwood Taos you will need 2 Hub/Drums # AKHD-545-2-1K. | I just bought a...

Get up to about 25 mph and apply the brakes on the trailer with the manual override knob without pressing the brake pedal on the vehicle. | I was driving down the road and tried to adjust my brake controller power output at...

Can not set the power when manual power knob is placed to the left. Any help would be appreciated | I have a display showing N.C continuosly. No trailer hooked. Have hooked up 5 wheel and display has no change. Can not set...

This is a light (32 lb) rack that does not require tools to install like other racks; you just twist a knob at the base of the rack and you're set. It also comes fully assembled so there's nothing to put together, and comes with a lock for the rack. |

This rack allows for tool free installation, if you turn the knob you tighten the rack in the hitch receiver and eliminate any movement between the rack and your hitch receiver. | I have a 2018 Jeep Wrangler and just had a...