Picking Out Hubs and Brake Assemblies for Tandem Axle Trailer that Weighs 6k
Hi I need to rebuild a boat trailer that’s rusting out in salt water. It’s a double axel total about 6000 lbs.Considerings the following… 8-247-50uc3 hub and drum Akfbbrk-35-d hydraulic brake kit And E48sr leaf springs Are they compatible? Also...
Bolt Sizes for a 2006 Toyota Matrix Trailer Hitch 24812
Do you know the size of bolts for 06 toyota matrix tow hitch? | All of the hitches available to fit your vehicle are Class I hitches. The most common hitch, 24812, was one which fits with or without the rear fascia. The bolts for that hitch...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
2008 Toyota Matrix Trailer Hitch and Bike Rack Recommendation
I was hoping to find a 2inch tow hitch for my 2008 Toyota Matrix base model. My bike rack is 2x 2inch and I was hoping not to use an adapter. All the hitches that I have found thus far have 11/4inch receivers. | Only the larger vehicles like...
Kat's Block Heater that Fits 2107 Nissan Altima
Will this fit a 2017 Altima? | Hey Tony, yes the Kat's block heater part # KH11412 that you referenced fits your 2017 Nissan Altima. It fits the 3.5 liter and 2.5 liter engines as well. How cold does it get by you? |
Roof Rack for 2017 Nissan Altima to Carry Ski Rack
I have a 2017 nissan altima that I was going to use your naked roof rack. I didnt know if you have to have a specific type of snow ski rack to be placed on top of this system? | Any standard ski rack would work well on the Sportrack roof rack...
Will SportRack Roof Rack Fit a 2014 Nissan Altima with Sunroof
I have a 2014 Nissan Altima sedan with a sun roof. Is this the same as what you refer to as a Naked roof? It looks like the SR1010 rack will fit my car. | A naked roof means that there are no side rails, crossbars, tracks or anything that could...
Will My Draw-Tite Hitch Transfer from My 2017 Nissan Altima to My New 2025 Nissan Altima?
I have a hitch I bought in 2019 for my 2017 Altima. Can that hitch be put on my new 2025 Altima? Thanks | Hello Terry, Congrats on your new Altima! What is your new favorite feature? Yes, you can transfer the Draw-Tite Sportframe Trailer...
Availability of a 2 Trailer Hitch for a 2004 Toyota Matrix to Carry a Bike Rack
hoping this exists. Mostly need for a bike rack, would rather not use a converter. thanks | You are definitely on the right track when it comes to not wanting to use an adapter for your bike rack. The only trailer hitches that are a confirmed...
What Size Bolts are Used to Install a Trailer Hitch on a 2010 Toyota Matrix
what is the bolt size , 12mm 1.25,1.50,1.75? thanks | If you look at the instructions for Curt hitch # 12228 which I have linked for you, the bolt size used is M12-1.25 x 30mm. This is a 12mm bolt. This is the size that fits the factory weld...
Replacement 1-1/4 Inch Hitch Tite Anti-Rattle Hitch Pin for Saris Bike Racks
I am in need of the sa3021 equivalent part for the 1 1/4 in model I have a Graber 4 bike 1 1/4 in hitch rack and it looks like the screw / nut is stripped and I need to replace it. | The 1-1/4 inch Saris hitch pin that is equivalent to part...
Trailer Hitch for 2013 Nissan Altima Sedan that Does Not Require Drilling to Install
I am looking for a trailer hitch for 2013 Nissan Altima SEDAN which can be installed with out a drilling. | The Curt # C11352 and Draw-Tite # 24796 require drilling in order to install on a 2013 Altima sedan. If you're needing the hitch as...
Recommended Trailer Hitch Receiver For a 2016 Nissan Altima
Hi guys, I’d like to buy a trailer hitch for my 2016 Nissan Altima. Can you tell me which hitch will fit ? So you have a model which is 2 inches | Currently we only have 1-1/4" trailer hitch receivers for your 2016 Nissan Altima. I recommend...
Are Load Resistors Needed for LED Backup and Brake/Tail Lights
Im thinking of changing to LED lights. 2010 Toyota Matrix XR . Do you need Load Resistors for backup and brake/tail light LEDs. What would be the cost from you for LEDs. Canadian Vehicle | When changing from incandescent or halogen type bulbs...
Trailer Hitch Needed For Hauling A Mobility Scooter On A 2018 Nissan Altima
Please tell me what does not confirmed to fit your 2018 Altima mean? I am a disabled vet, I now qualify to be issued a mobile scooter. Will any other hitch fit my car? The VA told me to go buy a new car, I can not afford to do that. Do you have...
Will AirBedz Rear Seat Air Mattress Fit 2022 Nissan Altima SV
Will this work in my 2022 Nissan Altima sv? Long drive to Florida and one sleep one drive. lol | Hey Carl! Yes, the AirBedz Rear Seat Air Mattress w Portable 12V Pump # 341033 will fit your 2022 Nissan Altima SV. This will definitely be a...
Bike Rack Option For A 2012 Nissan Altima Coupe
Looking for recommendations /shopping losti for a tow hitch and bike rack that will be compatible with my 2012 Altima coupe. Id like to tow 1-2 beach cruiser style bikes with pannier racks/bags. Id like to be able to access my trunk with...
Will Yakima BaseLine FX Roof Rack Hold Hobie Outback on 2022 Nissan Altima
I have a 2022 Nissan Altima and looking at Basline Fx for my car..Would it hold my Hobie Outback with approximate weight of 100lbs | Hi John; the Yakima BaseLine FX Roof Rack # Y59UV has a capacity of 165 lbs. It can definitely handle the weight...
Will the Swagman XC Bike Rack Support a Townie Bike
Will this rack hold a townie bike? | The Swagman XC Bike Rack, # S64650, should be able to hold a townie bike, but to be absolutely certain that this bike rack will support your bike, we will want to take a few measurements on your bike. First,...
Recommendation 1-1/4 Inch Drawbar with 3-1/2 Inch Rise on 2015 Nissan Altima
I need to know the length of the Drawbar I would need to attach a light trailer I bought for my kayaks. | We have a 3-3/4 inch rise that works great with your trailer, item # C45023 . It's the Curt Class I Drawbar - 3-3/4" Rise - 11-1/2" Long...
How Much/What Kid Of Transmission Fluid For D13503 Transcooler On 2008 Nissan Altima 2.5L
I plan to order the Derale D13503 for my 2008 Nissan Altima 2.5 l s four-door sedan it says that it is compatible with it now my question is how many more quarts of Nissan ns2 cvt transmission fluid will I need upon adding the transmission cooler....
Best Roof Rack Option For 2010 Toyota Matrix With Naked Roof
Hi there, I have a Toyota matrix 2010. It is bare roof and I’m looking for a roof rack to fit it. What options do you have available? Thanks Simon | Hey Simon, thanks for reaching out. We do have roof rack options for your 2010 Toyota Matrix....
Recommended Metal Weld on Fender for a 12" Wheel
i need to replace my axle/ spindle. my bearing size is L44649. in and out its is 5x4 1/2 i assume spindle replacement will be p.n tru44fr i need 1. 2 spindles 2. axle tube or what size to get from the metal shopthis is on a jet ski trailer...
What Hardware Is Included With The 10 Pack Of The Caliber Marine Slides CA86AJ?
What/how much hardware is included with 10 pack? | Hello Dee, thanks for reaching out. The 10 pack of the Caliber Marine Slides # CA86AJ comes with 30 stainless steel screws. All you will need for installation is a powered drill, Phillips head...
Filter Your Search
Contact and Help