Roof Rack for 2017 Nissan Altima to Carry Ski Rack

Question

Question:

I wanted to know what the difference between the individual items you sent me and the package deal item number RRRS584B.

asked by: David

0

Expert Reply:

Any standard ski rack would work well on the Sportrack roof rack # SR1010 that you referenced but this is not the roof rack I would recommend for your 2017 Nissan Altima as we have found it does not fit very well since it was designed to basically fit too many vehicles.

A much better and still reasonably priced option is the Rhino Rack roof rack part numbers # RR54VE which gives you a really great fit and much higher quality components. I attached an install video for this rack on a 2017 Altima just likes yours.

For a 6 ski rack that would work great with this we have the part # RR576 which was designed to fit the square bars of this rack.

expert reply by: Jameson C

0

click to enlarge

David

12/12/2019

I wanted to know what the difference between the individual items you sent me and the package deal item number RRRS584B.

Jameson C.

12/12/2019

Good find, the Rhino Rack part # RRRS584B is the way to go. It's better priced, has aero bars which minimizes wind noise, and since the bars and feet are flush with each other it gives a more OEM look. I should have recommended that rack first!

Answer 1

The SportRack Square Bar Semi-Custom Roof Rack #SR1010 is listed as a fit for your 2013 Nissan Altima S-series sedan with a bare roof. This roof rack includes all of the parts needed to install it on your vehicle. The installation instructions for…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Roof Rack for 2017 Nissan Altima to Carry Ski Rack

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching