Trailer Hitch Installation On 2015 Mitsubishi Lancer GT
Hi. I have a 2015 Mitsubishi lancer gt and looking to see if I have to drill hole to install your hitch. Looking a your instructions it looks like I would on the passenger side. Thank you in advance. | The Draw-Tite Sportframe Trailer Hitch...
Solution for Carrying Bike Rack on 2017 Mitsubishi Lancer SE With Fore to Aft Muffler
Hey there, I just need to know if this part would work for a 2017 Mitsubishi Lancer SE with a fore to aft muffler? If not and if you can think of one, can you provide me with an alternative? Ive read that this part may not be compatible with...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Recommended 4-Pole Trailer Wiring Harness for 2006 Lexus RX 400h
I dont find a plug and play tow vehicle harness for a 2006 Lexus RX400H Would a 2006 Highlander harness be used on the Lexus, thought they may be close to similar. thanks. | The reason there are no plug-and-play trailer wiring harnesses for...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Towing Capacity and Parts Needed for 2006 Lexus RX 400h
I know nothing about cars. Can you explain it to me like a toddler....in not kidding. Ive been googling for hours and half of my googling is just for mechanical terms. I have the Lexus rx400 2006 model. Im planning to tow a 2000lb trailer, will...
Installation Instructions for Curt Class I C11328 Trailer Hitch on 2015 Mitsubishi Lancer
could you send me the installation instructions for 2015 Mitsubishi Lancer Curt Trailer Hitch Receiver Class I - 1-1/4 inch | If you click the provided link, you should be able to see a .pdf copy of the instructions for the Curt # C11328 Class...
How to Reattach Spare Tire on a 2006 Lexus RX 400h After Hitch Install
How do you get the full size spare tire back in place without removing the hitch. The tire hits on the front cross member suspension and hitch. There is no clearance for it to pull up into place. | The Curt Trailer Hitch Receiver part # 13530...
Can The Spare Tire Still Be Accessed After Installing The Etrailer Hitch On A 2007 Lexus RX 400H
For a 2007 Lexus RX 400h. Is the hitch built so the spare tire will come down as it should if needed? | The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" Item # e98857 on your 2007 Lexus RX 400h does still...
Convert a 4-way to a 7-way on a 2006 Lexus RX400 H
Hi, My 2006 Lexus RX400 H already has a 4 pin wiring harness hooked up and working. How do I transform this setup into a 7 Pin setup so I can tow a small trailer? Lance Trailer 1575 Thank you, | If the trailer doesn't have brakes all you...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
How do I Tow My 2014 Mitsubishi Lancer with Standard Transmission?
Looking for a base plate for 2014 Mitsubishi Lancer standard transmission. | I have a solution for you. I went ahead and looked up your owner's manual for your 2014 Mitsubishi Lancer, and I discovered that the manufacturer says you cannot flat-tow...
Baby Moon Cover for Dexstar Conventional Trailer Wheel AM20514
Do you sale babymoon or any other hub caps that fit your 15 6 lug conventional dexter wheels. | Yes we have the baby moon covers # AM981306 that fits the 15 inch conventional trailer wheels part # AM20514 that you referenced. |
How High Will CE Smith 13 Inch Bolster Bracket Sit Above 3 Inch Crossmember
I am going to be replacing rollers with bunks on my ez loader trailer. The boat will need to sit rather high due to the width as the boat will need to be above the wheel fenders. For the two inside bunks, the boat will need to be at least...
Trailer Hitch and Wiring for a 2008 Lexus RX 400h
Will this hitch fit a 2008 Lexus RX400H? | Yes, Curt trailer hitch # 13530 fits your 2008 Lexus RX 400h. I have linked a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900....
Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit
Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...
How to Prevent Exhaust Components from Contacting the Trailer Hitch
I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...
Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit
I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...
Trailer Wiring Harness Availability for a 2008 Lexus RX400h
I have a 2008 Lexus RX400H with the factory trailer tow package. Apparently there is a wiring harness at the back of the vehicle where I can hook up another harness that will work for a trailer. It is supposedly a plug that plugs into the factory...
Recommended Trailer Hitch for a 2014 Mitsubishi Lancer
Hi there I have Mitsubishi Lancer gt 2014 single exhaust so I want now which the trailer hitch fit to my car thanks | The trailer hitch for your 2014 Mitsubishi Lancer that I recommend using is the Curt Hitch Receiver # C11328. It has a max...
How to Torque the Curt Class III Trailer Hitch # 13530 on a 2006 Lexus RX400h
When installing part number 13530 can I just manually torque it, or do I need an electric torque to get to the 36lb-ft req from the installation instructions? | When installing the Curt Class III 2 Inch Hitch, part # 13530, on your 2006 Lexus...
Filter Your Search
Contact and Help