Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
I have a 2021 Ram Promaster City. I was looking to install a roof rack using the Yakima Skyline towers. What adaptorsif any would be needed to install the towers using the factory mounting sitesas to avoid drilling holes of any kind? | Hi Phillip,...
Does Trailer Wiring Install for 2018 Ram ProMaster City Require Running Wire to Vehicle Battery
For the trailer wiring harness for my 2018 ram promaster city, instead of the long run to the battery, is it possible to just take 12v power from the rear 12v power receptacle? | When installing trailer wiring in your 2018 Ram ProMaster City...
Location of Fill Ports on Valterra RV Water Tank
How can you fill this? I don’t see a fill port. Or does it require a pressurized water supply? | Hi Elliott; the Valterra RV Water Tank # R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture,...
Will Adarac Aluminum Series Custom Truck Bed Ladder Rack Match 2022 Rivian R1T Roof Rack Height
I have a 2022 Rivian R1T. Does your rack height by chance match the factory rack height on the cab in case I wanted to use both? Thanks! | Hi Allen; I'm not sure what the factory roof rack height is on your 2022 Rivian R1T, but I can tell you...
Tonneau Compatible Ladder Rack For 2025 Rivian R1T With OEM Tonneau Cover
2025 R1T I am 5 4. looking for a ladder rack options the work with the Rivian Tonneau cover that rolls with the bed rail button. and the tail gate button and also the side cargo buttons. please help with information and options. | Hey Dave,...
Ladder Rack that Fits 2025 Rivian R1t
Does it fit on a 2025 Rivian R1T, and how is it installed with a tonneau cover? Any drilling involved? | Hey Tammy, we don't have any tonneau covers for your 2025 Rivian R1T that have the needed channels to use the Truxedo Elevate Ladder Rack...
Will etrailer Anti-Rattle Device part # e38FV Fit Rivian Hitch
Do we know if this product will work on the Rivian hitch given its hidden, and fairly deep sunken? | Hey JZ, I would have to see the hitch but basically it would need to have a lip/collar around the outside of the hitch for the etrailer anti-rattle...
Replacement Fender for Shorelander SLR80TAL
Looking for replacement fender options for shorelander slr80tal dual axle boat trailer. Vin 1mdavp0234a266485. Only need one fender preferably aluminum smooth finish | Hey Alan, we do have one smooth aluminum tandem axle fender setup with the...
Do You Have to Glue VanRug Custom Floor Mat For 2015 Ram ProMaster City Van
Looking at cargo mat for our 2015 Promaster City van. Unable to determine if the fit is actually appropriate. We do not want to glues anything down, rather be able to take out and clean if needed. Thank you. | Hi Barbara, We have the right...
Is There a Way to Adapt Yakima Raptor Bike Rack to Crossbars with Channels
Hello, I have a pair of the Yakima Raptor bike carriers and Id like to mount these on the factory cross bars on my Rivian R1T. The bar size and shape dont seem to be compatible with the universal mighty mount. So Im thinking I can use the tslot...
Will Maxtrax Mounting Brackets Fit Rivian Cargo Crossbars
Will this fit Rivian Cargo Crossbars? | Hey Philip, thanks for reaching out! The Maxtrax Mounting Brackets # MA92PR were designed around the Rhino-Rack Vortex crossbars so as long as the T-Slots for your Rivian crossbars are similar to the...
How Does Adarac Aluminum Series Ladder Rack A33VA Fit with Tonneau Cover
Hi, I own a 2022 Rivian R1T, with a power tonneau cover. After reading your materials, Im still not 100 sure of how the Ladder Rack mounts to the truck bed? Im seeing no drilling is needed great!, but wasnt totally sure if the tonneau cover...
Can The Rhino-Rack Roof Rack For Tracks Be Installed On Rivian Factory Mounting Points
Hi. I have a 2022 Rivian R1T Will the RhinoRack crossbars work for my factory bed top edge attachment points? Thanks, Nick | Hey Nick, The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT uses an M6 24x24x4 Nut to mount into...
Troubleshooting Signal Issues With A Furrion Vision S Camera System And Chevy Silverado
I have a 2019 silverado 1500 ltz. My camper is a 2021 forest river 273qbxl. I have the furrion vision s back up camera with the 4.3 monitor. When the camper is plugged into my truck for towing purposes the furrion monitor says no single. I'm...
What are Differences Between Curt and Tekonsha Harnesses?
For the wiring harness kits for 2016 Ram promaster City there are 2 shown, 1T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # 118719 2Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # C56270. 1....
Recommended Weight Distribution Hitch for a 7,000 lbs Short V Nose Trailer
This is a follow-up question to Adam R and your response to him. My trailer looks exactly the same as his picture...only about 15 inches of exposed frame between the center of the ball and the V Nose trailer wall. The side walls cover the side...
Can You Use a 2" Hitch Extender When Towing to Let Tailgate Down
I have a Rivian R1T electric truck. I also have a brand new Forest River Rockwood 2318G pop up camper that weighs 2600 dry, maybe 3500 lb with water and belongings. My issue is Id like to extend the hitch by 24 so I can put the tailgate down...
How Big is the Clamp on Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent
what is the opening of the Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent? to fit over a truck cross car brace. | I reached out to Yakima and found that the opening for the Replacement Mounting Bracket for Yakima SkyRise Rooftop...
Replacement Motor for Kwikee 32 Steps with Power Gear 903209000 Motor
Believe these are a set of kwikee 32 steps on a 2004 coach with a 9510 controller. Does this LC379145 kit fit this unit of steps ? | I have a solution for you, but the # LC379145 is not the correct motor replacement for a PowerGear 903209000....
How To Reverse Airflow Direction With A MaxxAir MAxxFan Plus RV Roof Vent
You have an article on reversing the motor wires to make a max air fan into an intake fan. Does that also hold true for the max air dome fan? My thought is to have one on exhaust and one on intake in a mini van camper | On older models of RV...
Is The Adarac Aluminum Series Ladder Rack Compatible With A 2022 Rivian R1T With Tonneau Cover
I have a 2022 Rivian R1T with a manual Rivian tonneau cover. Just want to confirm I can still use the cover, which is a set of panels that slide into the bed rails, when this rack is installed. Also, can I get the specifications on the crossbars?...
How to Tell if Malone BigFoot Canoe Carrier T-Slot Kit Will Fit Roof Rack Channels
I have a vantech j2000 roof rack with crossbars with built in channel. With the t-slot hardware work with this? Thanks,Eric | The Aero Style Crossbar T-Slot Fit Kit # MPG915, for the Malone BigFoot Pro Canoe Carrier with Tie-Downs # MPG112MD,...
What's The Difference Between The Taylor Made Big B, Storm Gard, And Super Gard Boat Fenders
What is the difference between the Big B, Super Gard and Storm Gard fenders? | Hey Greg, Starting with the Big B # 36971026, this model boat fender doesn't come with eyelets and requires you to run the rope through the fender. Next up is the...
Recommended Hitch and Wiring Harness for a 2017 Ram ProMaster City and Install Methods
Im getting hitch for 2017 ram promaster city van And eventually will need wiring to tow a small camper-is it better to have wiring done same time as hitch? | On your 2017 Ram ProMaster City van it doesn't matter. The etrailer Hitch item # e96YR...
Filter Your Search
Contact and Help