Result: knobs

Hi, I have the INH120 rack and lost the keys to it and the rattle knob is locked to the rack. If I order a new one with keys will those keys work with the existing knob? | Hi, I have the INH120 rack and lost...

The Locking Knob is the only think like this from Yakima that I know of. | I am planning to build a custom base bar setup to clamp to my trucks Thule SR Base rails. Im thinking of using the Inno square base bars drilled and...

I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | To get the correct replacement key for the locking knob...

The Tall Crossbar Adapter Kit # INISF711 comes with the bolts only, and does not come with the turn knobs. The knobs would be included with your Inno roof mounted carrier. | Hi! Can you please tell me if...

Trying to either find locking knobs for the specific threading I’ve seen them for bike racks, but no published thread specs or finding replacement hardware to match the thread requirement on locking knobs. ...

How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. |

The Tire Hold # INH120 is locked into the hitch and won't fall or be pulled off due to the tensioning hand knob at the front. After you tighten it in the hitch, which expands the shank, you lock the knob, and what this does is prevent the knob from being utilized. |

We have a couple of other mounting options for the control knob that can go inside inserts in your dash. The Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-001 which measures 1-1/4 by 1 inch. |

Hi Victor; are you referring to the knob marked with an arrow in the picture below? You can reach out to Inno and might have some luck with them sending just the knob. | Hello, i have an Inno fairing and i...

The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well. | hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand...

Be sure to determine a location on the dash where you will be mounting the actual controller knob so the cable from the control knob can reach the control module mounting location under the dash. | Thanks...

In addition to the locking hand knob that secures the rack to the hitch/vehicle, this carrier also has an integrated cable lock to secure the bikes to the rack. | Hello, Does this rack lock to the hitch? I saw a review on another...

This brake controller has a super small control knob that you can hide in the dash instead of a brick to hit your knee on. | Do you have a brake controller compatible with a 2019 Lincoln Nautilus? | Hey Gary, For your 2019...

The main unit mounts out of site so only the control knob is visible in the cab. The knob controls the braking power and also acts as the manual override. | Do you have a 7 pin flat trailer wire harness for...

i have checked for power to the controller it has power i plug in the trailer the light is green i turn the knob fully clockwise light stays green i press the pedal still stays green i checked for signal on the red wire no signal i press the brake there is signal i pull the manual lever to the left the light turns red i hear the power at the brakes ,can you help me know why my light doesnt turn red when i turn the knob all the way to the right and press the pedal? |

Even when I apply the manual slide knob, the brakes will not lock up. Any ideas? | Hi, I have a 2005 Fleetwood Victory pop-up tent trailer. I recently had new brakes installed and ever since then, the trailer brakes are weak....

The main unit installs behind the dash so only the control knob is visible. The knob controls the brake power and also acts as the manual override. | Maam / Sir, I have a 1997 K3500 Crewcab Dually...

If you don't already have a brake controller then I recommend going with the Curt Spectrum # C51170 because it is a proportional brake controller that allows you to install it in a variety of locations and the control knob looks similar to other control knobs on your Frontier. |

Hey Christian, Since Inno designed their roof rack system to use the fixed mounting points on your 2022 Honda Pilot's rails you would have to loosen the tension knob and retighten it every time that you wanted to remove/reinstall the crossbars. |

However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. | Looks like this box fit 2019 Subaru...

The Tow-Pro Elite brake controller is pretty unique because it can be installed virtually anywhere and you only need access to the 3/4" diameter control knob. The control knob has LED lighting integrated into it that changes colors depending on what settings you have chosen. |

The knob controls the braking power and acts as the manual override. | I just bought a 2016 ford f 150. It came with a 4 pin plug. I pull many trailers and need to convert to 7 pin and have trailer braking and reverse lights....

The fourth picture at the Etrailer site RED44FR shows a trim piece for the controller knob. Does that trim piece actually come with the brake controller. | Im considering buying the Redarc Tow-Pro Elite brake controller for...

The controller is operated by a control knob that can be mounted anywhere within the driver's reach. | The brakes on my trailer suddenly stopped working. Being pulled with a 2016 Silverado 2500 HD with an integrated brake controller....