Result: oval reverse light

When using the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part #e27SR with the Single-Axle Trailer Hanger Kit for Double-Eye Springs part #APS4 you will need to space the leaf spring hangers 25-3/4" apart.

The video you are referring to, linked to the right for reference, does indeed show a wire bundle with 5 wires. This is normal on a 2009 Chevy Silverado. Brake controllers only use 4 wires. On the truck you will not use the orange wire on to install…

Behind the emergency brake pedal on the 2015 Chevy Suburban mounted on the floor will be a black plastic cover that covers an electric junction box. If you remove the cover you will be able to plug in a brake controller install harness like the part…

We have 6-1/2 x 2 inch lights but the wires and grommets are sold separately. I recommend the the Trailer Tail Light - Stop, Tail, Turn - LED - Waterproof - 10 Diodes - Red Lens #STL72RB along with the 3-Wire Pigtail for Optronics Trailer Lights -…

The Optronics Fleet LED Trailer Tail Lights w/ Grommets #TLL12RK will fit perfectly in the opening you measured on your trailer. Replacement trailer lights can be confusing at times because each manufacturer uses slightly different dimensions so the…

Excellent idea, switching to LED. They use less power, last much longer and are brighter than incandescent lamps of the same size. Win, win, win. The grommet mount lamps you reference should fit in a 6-3/4 by 2-1/2 inch rough opening, which is the…

The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…

Due to the age of your 1995 Ford F-150 there currently are no plug-an-play type options available, but we do offer the 7-Way Pre-Wired Car Connector, 7' Lead #20023 which can hard wire into vehicle's trailer wiring harness. I've attached…

I have a solution for you but all of our axles are underslung so you won't find one with the bracket on top. To install the Dexter Trailer Axle Beam with E-Z Lube Spindles item #8327816 you will need the Dexter Trailer Springs Over-Under…

I don't see any issue with installing an axle flip kit on a drop axle aside from the shape of the axle as we only offer kits for rounds axle, the Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00 or part #K71-385-00.

Square axles can be tough to determine capacity. Often times the same spindle fits a range of axle capacities. The best way to determine the capacity is to get the inner and outer bearing numbers stamped into the metal of the bearings like you did.…

There isn't a great way to identify the weight capacity of a torsion axle by the size. The only true way to determine capacity if an axle tag is not present would be to pull the hubs and measure the spindle or read the part numbers on the…