How To Determine Weight Capacity of Trailer Torsion Axle
Question:
if a axle is 2by 3 what is weight rating
asked by: Bryan Z
0
Expert Reply:
There isn't a great way to identify the weight capacity of a torsion axle by the size. The only true way to determine capacity if an axle tag is not present would be to pull the hubs and measure the spindle or read the part numbers on the bearings and seals. I have attached a help article that explains this further as well as a list of our hubs.
expert reply by: Conner L
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- How to Determine the Weight Capacity of a 5x8 Tilt Trailer
- Can Timbren Axle-Less Kits be Used on Highway
- How to Remove Trailer Wheel that Doesn't have Lug Nuts or Bolts
- What Is the Gross Trailer Weight Rating of 2005 CAFI Goose Neck Trailer
- Gross Trailer Weight Capacity is 15,000 Pounds but Axles are Rated for 7,000 Pounds Each
- Boat Trailer Tires Showing Uneven Wear and Blowing Out on1995 Skeeter Trailer
- How to Determine Unknown Capacity of Axle
- Should Trailer Leaf Springs Be Almost Flat?
- Are Dexter 6K Idler Hubs 42655UC1 Sold in Quantity of 1 in Pairs
- Recommendation of Which Axle to Add Brakes To on Triple Axle Trailer
- Replacement Wheel Stud for 3,500 lb Axle Hub
- How To Determine The Diameter Of An Axle
- Is There a Way to Determine Axle Capacity of 6 Lug Axle without Label
- Replacement Axle For Dexter 3500lb SLR Axle
- How Do I Find My Trailers Axle Capacity?
- How to Determine Carrying Capacity of Trailer
- How To Determine the Weight Capacity For a Trailer Axle
- Spindle Recommendation for Trailer with 3 Inch Round Axle with 4 on 4 Wheel Bolt Pattern
- Can Axles be Added to Trailers to Increase the Trailers' Capacities
- Can Hub and Drums On 1990 Four Winns Boat Trailer Be Reused When Replacing Brakes?
- How To Determine the GVWR of a Two Horse Trailer from the 70s
- How to Determine Capacity of Square Trailer Axle
- Can a Spindle be Replaced on a 7,000 Pound Trailer Axle
- How To Identify Weight Capacity Of Dexter Axles On Trailer
- Correcting Heat Damage to Car Trailer Spindles After Bearings Burned Up
- How are Trailer Axles Typically Identified
- How to Determine Axle Capacity Based on Axle Diameter