Search: trailer plug > RV Leveling Blocks > Stackable Blocks x > 2 Blocks x >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
According to my research the wiring for your 1997 Dodge Ram 2500 are for the following functions: Black/orange - Tail/Running Red/Tan - 12V Power Green/Red - Left Turn/Stop Brown/Pink - Right Turn/Stop Light Blue - Trailer Brake Purple/Black -…
view full answer...Great question Michael, you’re on the right track. A Kodiak 225 caliper pin should move smoothly within the rubber boot when everything is properly cleaned and lubricated. If the pins aren't moving freely, it could be due to contamination, the…
view full answer...Hey Jeff, I did some checking and the Malibu part number 6832001.1 is exact same as the Optronics Trailer Connector w/ Coiled Cord #OPT48NB that you referenced so this would be the correct replacement. Did you lose your current 7-way or did it get…
view full answer...Hey Greg, thanks for reaching out. Unfortunately, no, Bulletproof does not offer an option for a single 2-5/16" ball platform. They do a single 1-7/8" ball, but the 2" and 2-5/16" balls are only available as a dual ball.
view full answer...Hello Mark, thanks for reaching out. Both the hitches you mentioned, the Draw-Tite #DT73RR and the Blue Ox #BLU92UR are a confirmed fit for the 2024 Subaru Outback. Both hitches also use the same size spacer and may require enlargement of the access…
view full answer...Hey Sterling, thanks for reaching out. The Terran Industries Trailer Hub and Drum Assembly #TX28VJ has 9/16" studs. I am not sure why our page says 1/2" but I will work on getting that edited. Sorry for any confusion. The hub fits a…
view full answer...With an unkown axle it is hard to know what it's capacity would be. Plus a trailer's capacity is more than just the axles it uses. You have to consider the suspension, the frame, coupler, brakes etc. The part #20440I-EZ-60 that you referenced…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...Hi Peter! great question. Just so you know, there aren’t any aftermarket hitches for the 2024 Subaru Outback Wagon that actually go through the bumper you'd have to go with a factory (OEM) hitch if you want that. For the best ground clearance…
view full answer...Hello Jeremy, Yes, our etrailer jack #e55ZV will automatically stop and not over raise. If you check out the video that I attached you will see that Steven still has his finger pushing down the button after the jack stops. What kind of application…
view full answer...While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…
view full answer...Filters
- 1 results