Result: winterize

| The ThermaHeat RV Holding Tank part # 277-000163 has an adhesive backing so no further method of securing it would be required nor is there anything I can recommend. | I am planning on purchasing a heating pad for my freshwater...

Is there a diode in the circuit that feeds the rv auxiliary power? If so where is it located? I want to use the solar panels on my camper to keep the truck batteries trickle charged during the winter when the rig is not in use. |

We have a 2007 cougar 311efs 5th wheel.The problem is the back running lights and markers stay on all the time.There is no battery in the rv and it is not hooked up to the truck.This was the first weekend that they have been on.None of the switches on the rv would turn them off.We did have a squirrel in the camper this past winter,but everything was working properly for the last month and there was no new sings of our little freind.Any thoughts would be appreciated. |

I need to get a small 200 watt heater dogs/winter into the covered space in the bed area. I need a 12 volt connection that goes to a small inverter to power the heater. | I have a 2015 Ford F250 with towing...

With the cover out of the connector you can then install the Pollak Twist-in, 7-Pole, RV-Style Trailer Connector for Chevy and GMC Vehicles - Vehicle End, # PK11916, and put that back into the bumper. | I...

I cannot add a second battery because there is no room. Our local RV dealership has fabricated a connector to use while winterizing travel trailers. | My travel trailer battery needs a little help. Our 12v...

I have a Kuat Sherpa 2.0 bike rack on the back of my RV. When the bikes are loaded and covered the RVs rear lights and rear license plate are covered. | I have a Kuat Sherpa...

Which cover can be used as a TRAILER SIDE 7 flat pins connector dust cover? | Which cover can be used as a TRAILER SIDE 7 flat pins connector dust cover? I need one for my RV long term storage, to avoid crap...

What is the amp rating on each contact for the Curt 7-Way RV-Style Trailer Connector - Vehicle End Item # C58155, and matching connectorPollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End Item # PK12706. |

Yes, you can reinstall that hitch cutout cover after installing the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C76RV. | Does the factory hitch cutout cover still fit after installing...

Do I need and in-line fuse for a RV tank heater pad? One for each pad or if run parallel a combined amperage fuse? | Do I need and in-line fuse for a RV tank heater pad? One for each pad or if run parallel a combined amperage...

Towing vehicle has round RV style plug-in and the trailer has a 7 pin connector — how do you make/find an adapter to make the connection. | Towing vehicle has round RV style plug-in and the trailer has a 7 pin connector — how...

We have now replaced it 4 times due to the plastic cover breaking. Is there a metal replacement oem version of this style plug in? | I have a 18 ram 4500 and we use the trailer connection many times a week. We have now replaced...

Question 2 - I have a wiring harness terminated right behind the cover on the bumper....I assume the connector with the spring cover in the package will plug right in to that? | Hello - I am looking at the...

If you're placing this in a camper then I'd go with something that comes with a cover like the # 37212225. This will allow you to cover up the excess space of the cutout hole for a clean factory look. | Do...

The Pollak Black Plastic, 7-Pole, RV-Style Trailer Socket, item # PK12-707E, is also a quality connector. | I have a 7 way connector which is mounted in the box of my truck under my toneau cover so it is protected from the weather....

I do recommend grabbing a cover # BLU53QV and hitch lock # e98881 to protect your tow bar. | I have a 2018 Newmar Dutch Star 4369 that came already setup for the Air Force One system and I’d like to flat tow my 2023 Bronco...

If you need a replacement 7-Pole, RV-Style Trailer Connector because your factory connector is damaged or not working, then the Pollak Twist-in, 7-Pole, RV-Style Trailer Connector, # PK11916, which you reference, will work well for you. |

Many times corrosion is the problem on 7-Way RV connectors. If you find corrosion you can clean it out and this may solve the issue. | all the lights work except the running lights on a 98 chevy tahoe. it has a factory 7 way...

I want to replace the front cover section of the outlet. It appears the 705 socket has been replaced by the 707. | I have a Pollak 12-705 trailer wiring socket on my vehicle. The spring door and bracket were broken off....

Finally, you will need a 7-Way connector at the rear of the vehicle and this can be done with the Twist-in, 7-Pole, RV-Style Trailer Connector, item # PK11916. Under the dash of a 2007 Silverado Classic you should see a black cover. |

Im new to towing and am wondering if there are any maintenance procedures I should be doing to keep the socket on the truck, and the plug on the trailer side in good working order. I have some Deoxit and some dielectric grease. Ive read some...

The port is located in an electrical junction box behind and to the left of the brake pedal. Just remove the cover, plug the wiring harness in to the empty port on the top row, second from the left, replace the cover and connect the other end to the brake controller. |

In the video I mentioned this will be covered but I also attached a help article that covers this as well. | I have a 2002 Chevy pickup model 1500. I need to put a complete 7 way RV wiring harness on to put...