Looking for Hitch Solution for 2004 Monaco Dynasty Coach
Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...
Parts Needed to Tow Tent Trailer With 2011 Mercury Mariner
Hi! My tent trailer has a 7 pin plug. I am looking to install a hitch and proper wiring on a 2011 Mercury Mariner without trailer tow package. All I see are 4 pin kits. Do you have any suggestions??? Thanks! | The wiring you will need for your...
Finding Installer for Curt Hitch on 2009 Kia Rondo
A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...
Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...
How Are the Bearings in the Malone LowMax Trailer Greased and Re-Packed
How do you gtease the bearings and how often is this needed to prevent mishap on the road? | The Malone Low Max trailer has a removable hub, so you'll be able to pull it to access and remove the bearings; we've actually done a helpful video...
How to Clean Out a Freshwater Tank and Lines on an RV or Trailer
How to clean out the fresh water tank for use. | It depends on the type of freshwater system you have in your RV or trailer. There is likely a specific procedure outlined in the literature for the RV/trailer that you will need to follow. If...
Recommended Spare Tire Cover For A 4.80/4.00-8 Trailer Tire
Please recommend a spare tire cover that will fit one of these without flapping in the wind! | With the Taskmaster 4.80/4.00-8 Bias Trailer Tire # AM30000 having a diameter of 16.1 inches when fully inflated, we will not have a perfect fit for...
Differences Between the Voyager and P3 Brake Controller
Hi, I currently have a Tekonsha Voyager brake controller unit. I just purchased a new 15 Jeep Grand Cherokee and will need to install a new brake controller on that vehicle. Can you explain the main differences between the Voyager model and...
Can Thule Hullavator Pro Fit on Square Malone Crossbars
Hi! I love this site!!! I want to purchase the Hullavator Pro, and I currently have 50” malone square crossbars on my ‘06 Mercury Mariner. Can my crossbars accommodate the Hullavator pro? Thank you! | Yes, the Thule Hullavator Pro # TH898 can...
Installing Trailer Wiring Harness in 2009 Mercury Mariner Without Factory Tow Package Wiring
My 2009 Mercury Mariner did not come with a hitch. However, it has the wiring adapter at the back of the vehicle. And, the power distribution box has the spaces for the three tow relays needed to power the wiring adapter. But, when I tried...
Does Curt Universal Installation Kit # C57186 Include Wiring to Activate 12V Pin on 7-Way
Does this allow me to charge the battery on my trailer while Im driving? | If your vehicle is equipped with a 4-Way connector, the Curt Universal Installation Kit # C57186 that you referenced includes everything needed to convert it to a fully-functional...
Can you Upgrade the 1974 Shasta Camper's Rims
I have a 1974 14 ft Shasta camper and I was going to replace the rims and tires the original ones are 13 in and I was wondering if I could upgrade to a 15 inch tire and rim I do have some clearance around wheel well but I wasnt sure if they...
How to Order Replacement Installation Hardware for a Trailer Hitch
I am looking for a hardware kit to install a draw-tite trailer hitch #75751 on my 2009 Mercury Mariner. Do you carry them? Will this model # work on my Mariner? | The Draw Tite Hitch part # 75751 that you referenced has been confirmed to fit...
How to Hardwire a Trailer Connector on a 2008 Mercury Mariner
I have a 2008 Mercury Mariner w/ backup sensors, however the sensors have not worked for sometime and I have no real use for them. The description states that I must use Modulite wiring harness 118551 and connect directly to the taillights or...
Can a Tandem Axle Trailer go to a Single Axle
I am looking at purchasing a used 5x8 dual axel utility trailer. One of the axels is broken. Can I convert the trailer to single axel? I dont plan on hauling over 1000 pounds. | If you are absolutely sure you wouldn't exceed the capacity of...
What Is Needed For Flat Towing A 2009 Mercury Mariner Behind A Motorhome With A Stowmaster Tow Bar
I have a 1999 Jeep Grand Cherokee that I tow behind my Class C motor home with a Roadmaster Stowmaster 5000. I am looking at trading the Jeep for a 2009 Mercury Mariner. What do I need to adapt the tow bar to the Mariner? | To attach the Roadmaster...
How to Determine if a 2006 Mercury Mariner Has a Factory Tow Package
How do I find out if my 2006 mercy mariner has towing package | The best way to find out if your 2006 Mercury Mariner has a factory tow package is to have the dealership run the VIN number of your vehicle. They will be able to tell you all the...
What Is The Difference Between The Curt Hitches # 13650 and # C13651
Can you tell me the difference between these two hitches? Curt Item # 13650 Curt Item # C13651 Thanks! | The difference between the Curt # 13650 and # C13651 hitches are pretty simple. The # C13651 hitch is designed to fit your 2008 Mariner...
Trailer Hitch Recommendation for 2007 Mercury Mariner
J have an 07 mercury mariner what kind of hitch should I get | 2 inch trailer hitches have the best weight capacities and the most hitch accessories made for them so whenever available this is the hitch size to go with. So for your 2007 Mercury...
Trailer Hitch Recommendation for a 2007 Kia Rondo
I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...
How to Install Curt Front Mounted Hitch # 31650 on a 2010 Mercury Mariner
Hello, Please can you help me find a video to show me how to install front hitch 31650 on my Mercury Mariner 2010. if you can send me a link to video. | We don't have a video showing the install of the Curt # 31650 on a 2010 Mercury Mariner,...
Recommended Trailer Hitch Receiver for 2011 Kia Rondo
I am looking for a trailer hitch for my KIA Rondo 2011. Do you guys have anything for this models Thanks | For a trailer hitch that fits your 2011 Kia Rondo we have the Draw-Tite Trailer Hitch Receiver # 36525. This is a custom fit Class I...
Comparing Lippert Trailair Cushioned 5th Wheel Pin Boxes LC155933 and LC158777
what is the difference between LC155933 and LC158777? | The two Lippert Trailair 5th wheel pin boxes LC155933 and # LC158777 are actually one and the same part. The old part number LC155933 has been replaced by the new item reference # LC158777....
Wiring Harness With Easy Install For 2009 Kia Rondo
I am interested in the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector for a 2009 Kia Rondo. One of the issues I see in the reviews is that the green wire from the drivers side to the passenger side can be too short....
Filter Your Search
Contact and Help