Recommended Spare Tire Cover For A 4.80/4.00-8 Trailer Tire
Updated 11/09/2021 | Published 11/08/2021 >
Products Featured in This Question
Question:
Please recommend a spare tire cover that will fit one of these without flapping in the wind!
asked by: Matt
Expert Reply:
With the Taskmaster 4.80/4.00-8 Bias Trailer Tire # AM30000 having a diameter of 16.1 inches when fully inflated, we will not have a perfect fit for a cover. The closest we will have will be the CE Smith Spare Tire Cover # CE27410, but this will fit tires up to 21 inches in diameter, so it will be very loose and will need modifications to fit snuggly.
We do also have the Classic Accessories RV Wheel Covers # CA80098, which technically isn't a spare tire cover, but can also be modified to work. This is for 18 to 21 inch diameter wheels as well, but may be easier to get fitting properly due to the bottom being opened.
Product Page this Question was Asked From
Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 4.80/4.00-8
- 8 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: etrailer Swivel Jack with Bolt-On Mounting Plate Feature Review
- Shop: Spare Tire Cover
- Video: Review of etrailer Trailer Jack - Car Hauler - Enclosed Trailer - Utility Trailer - e22ZV
- Shop: CE Smith Spare Tire Cover - up to 21" Diameter x 6-1/2" Wide Trailer Tires - Black
- Shop: etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin
- Shop: Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 9/16" Pin Hole
- Shop: etrailer Swivel Jack w/ Bolt-On Mounting Plate - Sidewind - 10" Travel - 3,000 lbs
- Shop: Trailer Jack Weld-On Swivel Bracket for Dutton-Lainson Jacks with a 3/8" Pin and Snap Ring
- Shop: Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Zinc - Topwind - 10-3/4" Travel - 2K
- Shop: Round Snap Ring Swivel Jack w/ Footplate - Weld On - Zinc - Topwind - 10-1/2" Travel - 2K
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Can 4.80/4.00-8 Tires Be Upgraded To Larger Size For Higher Speed Rating
- Q&A: Can 8 Inch Trailer Tires be Replaced with 12 Inch Trailer Tires
- Q&A: Solution for Replacement Wheels With 4 on 4.5 Bolt Pattern
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Determining Correct Replacement Hubs for Dexter 8-286 Hubs on 2,500 Pound Axle
- Q&A: Replacement Trailer Tire and Wheel for Older Dilly Boat Trailer
- Q&A: Recommended 2,000 lbs Idler Hub and Replacement Spindle w/ a 4 on 4 Hub
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern



