Result:

I have a 2008 Flagstaff camper with two Alko axles. It is in need of new brakes/drums. Ive attached a photo of the plate attached to the front axle. Could you reference me to the proper parts, drums and brakes, including seals and dust caps...

What is the axle to axle distance? | Hi Dawin! With the etrailer Tandem Axle Teardrop Fenders w/ Backing Plates - 15" to 16" Wheels - Qty 2 # HP92VR measuring 72" long, the mid point would be 36", which therein means 18" of space from the absolute...

RoadActive Suspension Custom Leaf Spring Enhancement Kit i have a high torque truck can I use this kit on the front axle of a 2001 ford excursion with 6 lift it has new bds leaf springs front and reae | Hey Frank, It is not advised to use...

I am having issues finding the right product to flat tow my vehicle behind my motor home. I have a 2003 Ford Excursion with a 6inch lift which is equivalent to a 4in lift on a F-250. I already have a driveline disconnect for my vehicle. Any...

I have a 2000 ford excursion 7.3 4x4 with a 7inch lift. Will I need a special Sumo Spring for this application to compensate for the lift or will the standard Sumo Spring be what I need? | The SumoSprings Solo Custom Helper Springs - Rear Axle...

I just bought a trailer without a title and Im trying to get a new one. I have found the vin number but the DMV needs too know the year of the trailer, how do I go about finding that out? I know its a Paris made trailer but I cant get a hold...

I currently have a set of Lippert 3500 lb axles V000113211 - LCI35-SB-86.5-68.5-NOSP-OS-L-545-7209-18PT and want to upgrade to 4400lb. Is there a equal in Dexter to look at? | When you are looking for a replacement axle there are a few measurements...

I have a 2005 Ford Excursion with the 6.0, everything on the vehicle is stock. I am pulling a 9,000lb 37’ travel trailer with the husky round bar Weight Distribution Hitch with Bolt-Together Ball Mount/Shank Assembly and Sway Control only 1...

I am hoping to haul 4 dirt bikes using the MT70070! I know, crazy, right? Would it be possible to haul a single motorcycle carrier and small, 3 place motorcycle trailer, using MT70070? Specs: 02 Ford Excursion - Max tongue weight 1,250 lbs 3...

Will this work on a 2000 Ford excursion 6.8 4x4 ? | The Curt trailer wiring harness # C55243 doesn't fit but I can recommend the parts to add a 7-Way trailer connector to your 2000 Ford Excursion. First, if the Excursion has a 4-Way flat connector...

I have a 4x4 excursion and wanted to know if this will work for front and rear leaf springs | The RoadActive Suspension kits, # RAS3621 for 2,000 pound capacity or # RAS3621-HD for 3,000 pound capacity, only fit the rear leaf springs on a 2001...

Can this coupler be mounted on the bottom side of the frame to create an underslung mount to work with 9 inch trailer frame and WD platform? | I spoke to Demco, and unfortunately the Coupler # DM15349-52 cannot be mounted to the bottom of a...

Im purchasing a replacement trailer jack for a pop-up camper from yall, the Atwood Round Trailer Jack, no hardware#AT80036...can you recommend an attachable wheel that will fit the Atwood Jack? There are several available, I just couldnt figure...

I have a 2000 Excursion and would like to get #TFREXC4 for the rear. My concern is that the vehicle has been lifted by a previous owner 3-4. I Measured the distance from the bump stop mounting point to the bar that they end up contacting and...

What is the radius of this crank? What is the length of this crank? | We spoke with our contacts at RAM jacks and they informed us that the length of the # TJD-12000-HD is 14-1/2 inches and the radius is 13 inches. |

Will RAS3611-HD work on a 2005 Ford Excursion 6.0 4x4 with an all spring 6 inch lift? | The RoadActive Suspension Kit will work on a lifted vehicle as long as the factory leaf springs have remained intact and unmodified. There are few lift kits...

Can you use the RAS system in addition to using SumoSprings? I have a 2003 Ford Excursion 4x4. I feel like using both these components will greatly improve the handling, ride and squat when towing my 8500lb 33ft travel trailer. Thank you!...

I have a 2018 RVR. Can you recommend a hitch for a bike rack, 4 bikes, and a bike rack? No towing. And I don't want to have to use any straps if possible. | I will be happy to help. For your 2018 Mitsubishi RVR I recommend etrailer Trailer Hitch...

Have an 87 Alpenlite 5th Wheel. It has 4 what i think are Hayes electric brakes. The magnets are round 2.25 inch diameter and look exactly like Tekonsha 5105 magnets but Im not sure. The drums are 10 inch. Ihave not been able to find any info...

Good Morning, I have a 2000 Ford Excursion 7.3L diesel. Im interested in a tow package that is adjustable in height and a weight distribution/sway bar package to tow my camper that will work with my lift. Thanks in advance. | So it sounds like...

2003 escursion has a few inch lift in rear , in the process of installing airlift bags with compressor , is this compatible with that system . | The RoadActive Suspension Custom Leaf Spring Enhancement Kit part # RAS3621 which is a fit for a...

There is confusion on which vehicle this trailer wiring is for in the description it mentions Chevy Silverado and Ford Excursion further in the reviews I read multiple different makes and models that were referred to. I have a 2005 Ford Excursion,...

Hi there I just bought a 2022 Mitsubishi RVR and wanted some clarification on what hitch and wiring I need? Could you send links? Also there’s no videos for install? Thanks | For your 2022 Mitsubishi RVR the e63AR Hitch part # e63AR is the...

I have a 2002 Ford excursion limited and the rocker panels are rusted away and I need to get frame mounted running boards. Id like them to support 400 lb. What do you recommend? |