bing tracking image

Excursion  x   >   RVR  x   >   Rabbit  x   >   Commander  x   >  

Replacement Hub, Drum and Brake Assemblies for AL KO 3,500 lb Axle

I have a 2008 Flagstaff camper with two Alko axles. It is in need of new brakes/drums. Ive attached a photo of the plate attached to the front axle. Could you reference me to the proper parts, drums and brakes, including seals and dust caps...

Troubleshooting Curt Trutrac System Digging Into Brackets

I recently purchased the Curt Trutrac WD C17501 for my 2004 Ford Excursion towing a 39ft travel trailer. The tongue weight loaded is around 1100 lb. The RV dealership installed the weight distribution on my trailer and set it up but after driving...

What Hitch Ball Size Do They Use in Europe

is hich ball the same size as europe | We currently carry four different size hitch balls which are 1-7/8", 50mm, 2", and 2-5/16". The most common hitch ball size in Europe is 50mm for which you can use part # 63912 if you need a 3/4" diameter...

Recommended Air Bags for a 2005 Ford Econoline 350 w/ a V10

I have a 2005 Ford Econoline 350 with V10. It has a 3 inch lift. Do you have any rear air suspension products that would work with the lift. I want to tow with it and I am a huge fan of of the rear suspension airbag systems. | Hey Russell, we...

What Rack System Can I Use On My 2002 Ford Excursion With Factory Side Tracks

Will this fit the factory tracks of a 2002 ford excursion? | Great question, Dave! After some double checking I can confirm that Rhino Rack part # Y02-480B-NT will work on the factory tracks on the roof of your 2002 Ford Excursion. What are...

What is Max Amperage Draw of Bulldog Winch Light Duty On-Board Air Compressor

What is the maximum amp draw of this compressor? | Hey Michael, the Bulldog Winch Light Duty On-Board Air Compressor # BDW46TJ draws at max just under 40 amps. |

Looking For A Shocker Hitch For My 2003 Ford Excursion Pulling A 7k Trailer

I am interested in a shocker hitch. I have a 2003 ford excursion, 7.3 l diesel with 4 wheel drive. I primarily pull a RV that weighs 7,000 lbs. What model do you recommend? thanks | Hey Patrick, The Shocker Hitch # SHK47VR would be a solid...

Looking For Replacement Weather Stripping For Lift Gate On 2003 Ford Excursion

I need to replace the weather stripping for the lift gate on my 2003 Ford Excursion and the OEM Part 2C7Z-78404A06-AA has been discontinued. I have been searching junk yards and the internet for something that might work. Might you have something...

What To Do When The Air Lift Air Bag Helper Spring Fails During a RV Trip?

I have the 5000 Air Lift series bags on my 2WD Ford Excursion, and during the beginning of our three month RV trip the passenger side will not hold air. Troubleshooting my a local mechanic indicates bag is damaged. What recourse do I have while...

Troubleshooting Open Ground Warning on P3 with Known Solid Ground Connection

I have the Prodigy P3 installed on my 2003 Excursion 6.0L diesel using the 3035-P adapter. Intermittently I get the Open Ground No Brakes warning message. No trailer connected. I checked the batteries negative terminal to chassis in the engine...

Trailer Turn Signals Not Working with # C55050 Wiring Harness Installed on a 2008 Jeep Commander

I have the 118408 converter connected to my 2008 jeep commander i everything works fine at the plug, when I plug in the only lights that work are the running lights, with running lights off, if I turn on a blinker and step on the brake the brake...

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Recommended Factory Replacement Hitch for a 2000 Ford Excursion

2000 Ford Excursion with towing package. The current Ford hitch has an electrical connection in a steel frame to the left of the hitch. I don't see that on the CURT 14011 Class 4 Trailer Hitch. Do I have to remove the current electrical connection...

Looking for Replacement Locking End Caps for Rhino Rack Aero Roof Rack

hi- i am wondering if rhino rack locking end cap part m622 is available to purchase and what size security key is used to operate. thank you in advance for your time. chris baer | Hey Christopher, it sounds like you are looking for a replacement...

Air Bag and Auto Leveling Compressor kit for 2003 Ford Excursion

Hi. I would like to install air bags on my Excurion 2003 4wd diesel. I would like it to auto level and not have to mess with bicycle pumps etc. Is there a kit for that? Thanks | Hey Pete, we have just what you are looking for with the Firestone...

Does Centering Keel Roller # CE29505 Come with Install Brackets

Mine has 8” bracket does the new one come with replacement bracket? | The self centering roller part # CE29505 does not come with a mounting bracket but for that we have the # CE10305G for a bracket and for a roller # CE10727A which includes...

Replacement Keys For Rhino Rack

I purchased a Rhino roof rack system 2003 Ford Excursion from you 3 or so years ago. Im in need of replacement keys, the lock number is 012 and the rack end cap is code M622 original keyinch was a blue plastic round key. Can I get those from...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Recommended Wiring Harness For 2010 Jeep Commander Without Factory Tow Package

we purchase hitch and wiring harness for our 2010 jeep commander. everything went perfect with install but the lights wont work. The vehicle was not equiped with a factory tow package. Does the computer need to be activated. Any ideas on...

Which Should be Set Up First Air Bag Pressure or Weight Distribution

Hi, my name is Cliff. I just purchased the AL57132 from etrailer. I had it installed on a 2001 ford excursion. I have been using a weight distribution system for towing a travel trailer. Normally I would hook the truck up to the camper,...

Front Hitch for 2006 Jeep Commander to Mount SnowBear Personal Snowplow

Mounting bracket for snow bear personal plow to fit 2006 Jeep commander | Since the SnowBear Personal Snowplow part # SB324-081 is designed to attach to a front hitch what you'll need is a front hitch designed to fit your 2006 Jeep Commander...

Replacement Side Marker Lights For A 2015 OEM Can AM RT622 Motorcycle Trailer

I have a 2015 OEM Can Am RT622 motorcycle trailer and need Replacement LED Side Marker lights YELLOW in the front RED in the back they are obsolete and I can not get them anymore and was wondering if you would be able to help find a replacement...

Parts Needed To Add 4-Flat And 7-Way To 2008 Jeep Commander

Tim Anderson 320-226-5570 Looking to add wiring harness for a 2008 jeep commander without factory tow package I know I need 118408 but would also like to add 7 way round plug-in and mount but I don’t need the trailer brake option | Hey Tim,...

Recommended 3-Prong 3-Wire Pigtail for a Optronics Trailer Tail Light

Good evening, I am inquiring if there is a 3 prong 3 wire plug for this brake light STL29RB that I could solder and then plug into a existing wire harness for a trailer. Thanks. | Yes, there is Jeff. We actually have three different 3 prong...

Filter Your Search