Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
All of our bumper strips are 96" long and have the holes pre-drilled out at 11" on center, but the nice thing is these can be cut and re-drilled to accommodate your application. You just need to choose which one has the width…
view full answer...According to SumoSprings, 6" is the minimum for the #TSS-106-40. I asked them about this and they said you cannot use these if the space is under 6" so unfortunately they won't work for you. Doing so will overload the springs which can…
view full answer...The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.
view full answer...In order for your trailer suspension to function properly you will want the angle of the shackle strap to be towards the axle so that as the leaf spring compresses and expands it will have somewhere it can go. Otherwise, you will not get the optimum…
view full answer...What is the length of your leaf springs? Typically you put the hangers about 1/4 of an inch narrower than the length of the leaf springs from eye to eye when they are unloaded.
view full answer...Based on what you are saying and your photos, it apprears you have springs that are double eye springs. The springs will need to be based on the load of your trailer. The axle capacity may be difficult to know as you said it appears to be custom. I…
view full answer...The height of the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket #TSS-106-40 is 4 inches for just the rubber spring portion of it. Since you have 3 inches from the axle to the frame that would indicate that there would be a compression…
view full answer...It sounds like you are looking for the Dexstar Steel Mini Mod Trailer Wheel part #AM20436 which matches all the specs in the photo you attached. The manufacturers part number for this wheel is also 017-231.
view full answer...Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…
view full answer...Since your axle still sits above your leaf springs you would actually want to start but "flipping the axle". I couldn't find what axle your 2017 KZ Sportsman 150bh has, but this is easy enough to figure out by taking a measurement of…
view full answer...Related Searches
Filter Your Search