Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
AMPLock products like the #AMP37FR are made in Canada. Their headquarters is in Drummondville Quebec Canada.
view full answer...The AMPLock #AMP37FR is designed to fit on 2" receivers, so it will work on your 2020 Ford F-150's factory receiver. This hitch pin has a 2-13/16" span.
view full answer...I don't have a way to verify fit of the AMPLock Trailer Hitch Receiver Lock part #AMP37FR on a 2020 Toyota Tacoma but we can offer you this same pin with a longer usable span, the AMPLock Trailer Hitch Receiver Lock for 2-1/2" or…
view full answer...I do have all of the components you will need to flip the axle on your tent trailer but there is not an all inclusive kit per se to do so. However, the kits are pretty basic as all they include are u-bolts, tie plates, and spring seats. For your…
view full answer...Yes, the etrailer.com Adjustable Trailer Coupler Latch Lock #e98883 that you referenced can be keyed alike. Once on the product page simply select "Keyed Alike" from the drop-down menu and all 4 locks you receive will use the same…
view full answer...Since your Venture leg is the follow leg the repair kit is #LC146060. If you had the lead leg it would be #LC146059.
view full answer...Based on what your VMC900L has wrong with it the best option would be to replace the lead leg with part #LC119102.
view full answer...Weight distribution systems that have 2-point sway control generally have sway control just at the ends of the springs bars on the trailer side. On the Fastway systems for example the L bracket that secures the bar to the frame bracket can be…
view full answer...If the front part of your square-bodied coupler is approximately 3 inches tall, based on the inner dimensions of the lock the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33 will work well for you. The #BLTL-33 has inner dimensions of 3-1/8 inches x…
view full answer...I do have an option that will allow you to use a sway control bar on the left side of a ball mount, however, the Reese Sway Control adapter plate #RP26003 is designed to be used on the right side only. To be used on the left side, this plate would…
view full answer...If your 1-1/4 inch hitch is on a 2008 Chevy HHR then it is a Class I hitch. You can identify a Class I based on the tongue weight and gross trailer weight capacities. A Class I hitch will top out at 200 pounds tongue weight capacity and 2,000…
view full answer...For your 2021 Tesla Model Y I recommend the Curt Echo Wireless Trailer Brake Controller #C51180. The echo plugs in line with your existing 7-way at the back of your vehicle. It is controlled through your smartphone via Bluetooth. Since this does…
view full answer...Filter Your Search