Is Torque Wrench Needed to Install Trailer Hitch on 2018 Mazda CX-9
Hi quick question. Looking at the Draw-Tite Class III hitch for my 2018 Mazda CX-9 but wondering if bolts need to be torqued down with a torque wrench for installation? | Yes, when installing the Draw-Tite Max-Frame Trailer Hitch Receiver #...
Recommended Hitch for a 2023 Mazda CX-9
What is the best hitch for a 2023 Mazda CX-9? | The best hitch for your 2023 Mazda CX-9 is the Draw-Tite Trailer Hitch item # 76020. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2"...
Best Practice to Deal with Chipped Paint on Trailer Hitch
What do you recommend to deal with areas that have chipped paint on the hitch? | If you notice chipped areas on your Draw-Tite Trailer Hitch # 76020, for your 2018 Mazda CX-9, the best thing to do is lightly sand that area to get it evened out...
Can Rhino-Rack Fit Kit DK384 Be Re-Used to Install Vortex Aero Bars on 2016 Mazda CX-9
Eve if an adapter is not available, is there a modification to install the RhinoRack vortex crossbars on the euro square 2500 feet? Maybe a spacer or something? | The Rhino-Rack roof racks made for your 2016 Mazda CX-9 that has a bare roof do...
Parts Needed to Install Brake Controller and 7-Way on 2011 Mazda CX-9 with 4-Way
Hello, My 2011 Mazda CX-9 is equipped with a factory tow package. Its currently set up for a four pin connector, but I would like to change that to a 7 pin RV style connector for use with electronic brakes. I have located what appears to...
Ball Mount Recommendation for 2013 Mazda CX-9 for Towing Uhaul Trailer
I installed a CURT 13575 hitch on my 2013 Mazda CX-9 . The hitch height measured from floor after install is approx. 14 inches. I was going to buy a curt 45036 but i see it has a of 2 inch. . The U-haul standard coupler height is 18 inches....
Flush Bar Rhino Rack Roof Rack that Fits 2022 Mazda CX-9
Does this fit a 2022 Mazda CX-9? The years on the website only go up to 2021. Thanks | I checked with Rhino Rack and they have confirmed the fit of the RVP roof rack part # RRRVP51 on your 2022 Mazda CX-9. |
Recommended Trunk Mounted Bike Rack For 2012 Mazda CX-9
I am looking for a bike rack for my 2012 Mazda CX9 to transport 1-2 light weight road bikes. Will the trunk rack work, and will I be able to open the trunk with the rack on? | For your 2012 Mazda CX-9, I recommend the Saris Bones 2 Bike Carrier...
Where Does the 15-Amp Fuse for the Curt T-Connector Wiring Harness Go?
I installed a Curt wire harness for 2020 Mazda CX9 a year or so ago, I am not sure my wife used it but I thought I tested it and it worked. Tried to use it this week, trailer lights did not work, confirmed they worked off my Chevy. The Mazda...
What Bike Rack do You Recommend for Transporting 2 Occasional Bikes?
Can I use swagman XC2 Bike Rack # S64650 with my Mazda CX-9 and connect # S64663 to extend capacity to 4 bikes? I already have # S64663 but need to add 2 more bikes occasionally. Thanks. | I have an answer for you. Unfortunately, there is...
3-Bike Trunk-Mounted Bike Rack Fit for 2016 Mazda CX-9
Will this fit 2016 Mazda CX-9 Grand touring? TH911XT I saw the confirmation for older Mazda CX-9 but couldnt find newer model. | I checked with our bike rack manufacturers, and there is a 3-bike trunk-mounted bike racks that fits your 2016 Mazda...
Parts Needed to Tow a Trailer with a 2018 Mazda CX-9
Wich trailer and wiring i need for maxda cx9 2018 am using it to tow a jet ski | In order to tow a trailer with a 2018 Mazda CX-9 you'll first need to start with a trailer hitch and for this I recommend the etrailer Trailer Hitch Receiver part...
Four Bike Rack for 2018 Mazda CX-9 That Can Allow Rear Cargo Area Access
Video reviews of the Yakima HoldUp state that for *some* SUV models, the HoldUp doesn't tilt down far enough to allow the hatch door to fully open. But I cant find any confirmation that it would work specifically with the Mazda CX-9 2018. Obviously...
Sway Control Only for an R-Pod 172 Trailer
Hi, I am looking to possibly add a sway bar part# 17200 to our R-Pod 172 to connect to our 2010 Mazda CX9 to help with some up coming highway driving. I am new to towing and what not so forgive me if this is a stupid question. Am I correct...
Roof Rack Recommendation for a 2008 Mazda CX-9 With a Bare Roof
I am looking for a roof rack that I can install on my 2008 Mazda CX-9. My car does not have any factory installed rails or anything. | We have several roof rack options that will fit the bare roof of your 2008 Mazda CX-9. I have attached a...
Troubleshooting Trailer Taillights That Only Function on One Side of the Trailer
Why does nothing work on the drivers side tail-light, parking, brake, or directional? I have bought hitches from you in the past, but health reasons prevented me from doing so on this car. | Since all of the wiring problems are on one side...
Will the Curt Ball Mount 40332 Clear the Bumper on a 2019 CX-9?
Hi, I have a Drawtite class 3 hitch on my 2019 CX-9 I purchased from you. Id like to learn if this ball mount Part # 40332 would clear my rear bumper in the uprise position? I will be using a 2inch ball. Thank you | The Draw-Tite # 76020 that...
Can I Install a Trailer Wiring Harness on a 2010 Mazda CX-9
Can you install wiring on my 2010 Mazda cx-9 to be able to hook to a trailer? | Your 2010 Mazda CX-9 does have trailer wiring available to install that will allow you to power the lights on a trailer. I recommend using the T-One Vehicle Wiring...
Difference Between Curt and Draw-Tite Trailer Hitches for 2012 Mazda CX-9
These two are very similar other than design. Does one have an edge over the other? | Other than the difference in brand/manufacturer, the Curt # 13575 and the Draw-Tite # 75531 for your Mazda CX-9 are pretty close to identical. Between the...
Does Trailer Hitch from 2022 Mazda CX-9 Also Fit 2019 CX-9
I have a 2019 Mazda CX 9 and want to switch my hitch to a 2022 CX 9 will it fit my new car thanks | A trailer hitch from a 2019 Mazda CX-9 would also fit a 2022 CX-9 like the Draw Tite part # 76020 that you referenced. Worth nothing is that...
Will the Etrailer Motorcycle Carrier Fit a 2019 Yamaha XT250?
Will this carrier fit a 2019 Yamaha XT250 with the stock 120/80-18 rear tire? | Yes, the 4.72-inch width of the rear tire of your 2019 XT250 will fit into the 4.88-inch track of the etrailer Motorcycle Carrier w/ Ramp for 2" Hitch - 76" Long...
What is the Ideal Height for a Ball When Towing a U-Haul Trailer?
What is the ideal height from road to ball, typically pulling a uhaul trailer. Im concerned with clearance on my 2016 Mazda CX-9, installed your Drawtite 76020 hitch. Bumper to current ball is 2inch clearance, looking for longer tongue ball....
Axle Thickness of Dexter 5,200 lbs and 6,000 lbs Axles
Is the wall thickness the same on the Dexter 6000# axle and the 5200# Dexter axle? My main reason for going to 6000# from 5200# is to have a stronger tube so I dont need alignments every couple years. The 5200# axles from dexter seem a little...
Is the Yakima FullSwing Compatible to Carry Three Adult Bikes on a 2013 Mazda CX-9?
Hi there, can you please confirm if this will work with a 2013 CX-9 on a 2inch Class 3 Hitch receiver? I am looking at carrying 3 full size bikes and was contemplating on buying this as opposed to using a Yakima swing way adapter with a Yakima...
Filter Your Search
Contact and Help