Locking Pin Compatible with BWGNC4250 Gooseneck Coupler
It does not do any good for the coupler to lock to the ball if all you have to do is remove the entire coupler. The pin holding the coupler in the sleeve needs to be a locking pin. What would be your recommendation. I was looking at InfiniteRule...
Will B&W Tow & Stow BW44FR Have Enough Clearance With Hitch 17 Inches From Ground
Whats the total height of the product? I have Chevrolet Silverado 1500 RST and I have 17 inches of height to the bottom of the receiver. I know I need 11 inches of clearance. Is it less than 6 inches down from the receiver bottom? | From...
Trailer Hitch for a 2019 Toyota RAV4 XSE Hybrid
Will this hitch fit the 2019 hybrid? | There are currently no exclusions for the Hybrid model therefore, yes the Curt Trailer Hitch Receiver part # C13416 or the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT82QR should fit your 2019 Toyota...
Adjustable Ball Mount With the Furthest Hitch Pin Center To Hitch Ball Center For Utility Bed Truck
Does the Curt Rebellion have the longest hitch pin hole to ball distance out of all of the adjustable 2-1/2” ball mounts you carry? I have a Curt 45902 and need more rise and longer length. I do not need any further , in fact a little less...
How Far Does Gen-Y Torsion 2-Ball Mount 325-GH-1324 Hang Under Receiver
How low does the hitch hang below the receiver | The distance will be 12-1/4 inches from the bottom of your 2-1/2 inch receiver to the bottom of the Gen-Y torsion ball mount you asked about, which is the following part number: - Gen-Y Torsion...
Locking Hitch Pin Kit Recommendation for BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch
lock kit for HD254 | To lock the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch # HD254 to your hitch receiver I recommend the InfiniteRule Hitch Lock # 34061072-D, but if you're interested in locking the platform to the ball mount as well...
Adapters For Connecting Roadmaster Nighthawk Tow Bar To 2018 Jeep Wrangler JK Unlimited
I would like to use a Roadmaster Nighthawk tow bar to pull our 2018 Jeep Wrangler JK unlimited behind our class a RV. Do you know what aftermarket bumper will work with the Nighthawk ? | There are several manufacturers who have flat tow rated...
Do They Make a 1-1/4" Adjustable Ball Mount?
Is there an adjustable mount for 1 1/4 shank? | The Lock N Roll 3-Position Adjustable Channel Bracket for 1-1/4" Hitch Receivers # 336VS507 will allow you to use a Replacement 2" and 2-5/16" Dual-Sided Hitch Ball # C45912. This will give you...
Will InfiniteRule Hitch Lock Fit Curt Channel Style Adjustable Ballmount
Hi, Does the lock fit the Curt Channel lock? locking to lock the ball into the channel. I think I need around 3.75inch of length to be able to lock it in. thanks | I'm not exactly sure which Curt you're talking about, but I assume it is one...
Recommended Lock For A Demco 2-5/16" EZ Latch Coupler
Will this fit a demco 2 5/16 ez latch? | You certainly can use the Trimax Coupler lock # TMX47FR with the Demco 2-5/16" Ez latch coupler like the # DM14040-81. The Demco coupler is 2-7/8" wide on the outside so it will undoubtedly fit with the...
Are the Replacement Key for Andersen Rapid Hitch Pins Universal or Are They All Numbered?
I have a Anderson hitch with a missing key for the Rapid hitch pin there’s no key code on the pin. Does this replacement key work on all? | I have a solution for you, but the short answer is no, it does not. The Replacement Key for Andersen...
How to Lock B&W Tow & Stow 3-Ball Mount for 2-1/2 Inch Trailer Hitch Receiver
I really like the 18k tow and stow 3-ball mount. the one for the 2-1/2 inch hitch, but i would like to be able to lock it to my hitch and also lock the ball mount. is there something that will let me do that? | There is a way for you to not...
Will InfiniteRule Locking Pins Back Off On Road
I see these locks are a screw-on type. My worry is they may back off and start to come loose on long pulls. Are there any documented cases of this? | We haven't had any issues with the InfiniteRule Locking Pins part # IR57RR coming loose so...
Lock Pin Recommendations/Options for B and W Tow N Stow Adjustable Ball Mount
What security pins do I need for this hitch? I want to but 2 pins keyed alike . 1 through the 2inch reciever hitch the other through the adjustable system. | We have just what you need to lock all of the pins of the B and W Tow n Stow Ball...
Correct Curt Trailer Hitch Receiver for a 2017 Toyota Tacoma SR5
Will fit a 2017 Toyota Tacoma Sr5? | The correct Curt Trailer Hitch Receiver for your 2017 Toyota Tacoma SR5 is part # C13264, not part # C13902 which is for Ford, Chevy, and Ram trucks. The Curt Trailer Hitch Receiver is also a custom fit option...
Locking Pin Kit for B&W Tow & Stow 3-Ball Mount for 3" Trailer Hitch Receivers
Lock kit for B&W Tow & Stow 3-Ball Mount - 3" Hitch - 7-1/2" Drop, 7" Rise - 21K - Black | To lock your B&W Tow & Stow 3-Ball Mount # BWTS30049B to your 3" hitch receiver I recommend using the InfiniteRule Locking Pins # IR29FR because it's...
Best Lock Set For 21,000 lb Gen-Y Adjustable 2-Ball Mount For 2-1/2 Inch Hitch
What is the best hitch lock set - for the platform and mount - for the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K Item # GY65FR | The best lock set for the 21,000 lb Gen-Y Adjustable 2-Ball Mount w/...
Fit of BulletProof Adjustable Ball Mount on 2018 Ford F350
I assume this hitch would fit my 2018 F350? | As long as your 2018 Ford F350 is equipped with the 2-1/2 inch hitch, and the distance from the inside bottom edge of the receiver tube of the hitch to the ground is between 12-18 inches, the BulletProof...
Can Locking Actuator in Diversi-Tech/Fastway Aluminum Ball Mount be Replaced
Do y’all sale the actuator for the lock. I bought a rekeying kit but the actuator is broke The piece the lock turns for the pins to move for the hitch to unlock out of the receiver | The only internal pieces that are replaceable on a Diversi-Tech...
Lock For Demco Trailer Coupler With eZ-Latch
I bought a demco ez-latch coupler and installed it. What is diameter of hole to lock the trailer? I want to buy a lock but everywhere Ive looked the bar is too wide. | Thank you for your purchase of the Demco Channel Tongue Trailer Coupler...
2022 Toyota Tacoma Correct Hitch and Parts Needed to Tow a Trailer
Are you sure the carriage bolts supplied with the etrailer hitch will fit in the 2022 Tacoma rear bumper ? | Yes, the etrailer Trailer Hitch Receiver # e98905 uses 1/2-13 x 1 3/4 carriage bolts to fit the existing holes in the bumper beam on...
Shank Diameter for Shocker Hitch XR Adjustable Drop Hitch
What is the diameter of the ball shank? I have a couple trailers with 1-7/8 or 2” balls and prefer to use a Convert-A-Ball ball for convenience rather than carrying several mounts/balls. Thanks | The replacement hitch ball for the Shocker Hitch...
B&W Tow & Stow 3-Ball Mount to Fit with GM MultiPro Tailgate System
do they make it for a 2inch hitch for the gmc 1500 multipro tailgate | We have 2 B&W Tow & Stow 3-Ball Mounts that are designed to work with the GM MultiPro Tailgate system: 2.5" Drop/3.5" Rise - 10K - # BW64FR 4.5" Drop/5.5" Rise - 10K - #...
Trailer Hitch and 7-Way Wiring Fitment for a 2023 Nissan Frontier
is fitment for 2022 nissan frontier the same as 2023 nissan frontier need class3 hitch and 7 pole wiring kit | From what I'm seeing it looks like the parts that are compatible with the 2022 Frontier are also compatible with...
Filter Your Search
Contact and Help