Recommended Tongue Mounted Tool Box For A Big Tex 70PI Trailer
I am looking for a tool box that will fit the tongue of my Big Tex 70pi 7x14’. It has a “set back jack” | For your Big Tex 90PI trailer, I recommend checking out the: -RC Manufacturing T-Series Trailer Tongue Tool Box # 350980. This toolbox...
Recommended A-Frame Tool Box That Fits On Stromberg Carlson Trailer Cargo Carrier CC-255
Is there an A frame tool box that will fit into a stromberg-carlson tongue mounted storage tray? | There sure is! The RC Manufacturing T-Series Trailer Tongue Tool Box - A-Frame - Aluminum - 2.6 Cu Ft in Silver # 350970 or Black # 350980 will...
A-Frame Toolbox to Store Propane Tank and 2 Batteries on 1978 Boler Trailer
Good morning I am looking for a A frame box to mount on my retro 1978 Boler trailer, woul like it to hold 2 Interstate 6-volt golf cart batteries and the propane tank can you suggest a product you have Thanks | I recommend starting off by...
What Gauge Steel is the RC Industries Z-Series Underbody Tool Box
what gage steel is this 1818-48 I had got one from tractor supply too thin door bends.... I need heavy duty..... | The RC Industries # UB1818-48 body of the box is made from 14 gauge steel, plus the door itself is made from 2 separate 14 gauge...
A-Frame Trailer Mounted Toolbox with Lid that Opens a Full 90 Degrees
How far does the lid open on this box? The video shows it will open a full 90 degrees but the still pictures show less than that. One of the reviewers said his did not open as far as shown in the video. I just returned one from Harbor Freight...
How Does A-Frame Trailer Tongue Tool Box Mount to the Trailer Frame?
Does this tool box bolt to the trailer, or does it require welding? | The RC Manufacturing T-Series Trailer Tongue Toolbox - A-Frame - Steel # 313-TM362016M is just the steel box. Most people drill into the bottom of the box to hold the box...
What Gauge Steel is RC Manufacturing T-Series Trailer Tongue Toolbox Made From
What gauge is the steel? | The RC Manufacturing T-Series Trailer Tongue Toolbox # 350980 is constructed of 14 gauge steel. I attached a review video link for this box for you to check out as well. |
Compatibility of Underbody Toolbox and Trailer Tray Cargo Carrier
I am considering mounting this unit on the Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers - Item # CC-255 that I have already purchased. This will go above the propane bottles on my travel trailer tongue. Any thoughts or suggestions?...
Where is MaxxTow A-Frame Trailer Tongue Toolbox Made
I am looking at several different utility trailer A-Frame style tool boxes for the front of my trailer. One I looked at is MaxxTow brand MT80349. Can you tell me where it is made? I like the RC Manufacturing box as well and it is made in USA....
Is There a Replacement Lock Cylinder Available For the Compression Latch # 313-8-325-281?
im looking for replacement key cylinder for the Latch for RC Manufacturing Tool Box Item # 313-8-325-281 | Currently we only carry the Replacement Compression Latch # 313-8-325-281 as an assembly for the RC Manufacturing Z-Series Truck or Trailer...
Is Underbody Mounting Kit 350998 Required to Install Underbody Truck Toolbox UB1818-48
Are the additional support brackets recommended for a standard underbody installation? I have a flat bed and was planning to simply bolt through the top of the toolbox. Thank you | You will want to use the Underbed Toolbox Mount Kit # 350998...
Can a Propane Tank be Carried in a Trailer A-Frame Mounted Toolbox
Can I store my propane tank and battery for my TAB trailer in your enclosed tool type box. Currently my trailers box has an open bottom in case anything would leak. Thank you | No, you would not place a propane tank in something that does not...
A-Frame Toolbox Options For A Big Tex 60PI
Looking for a recommendation for a tongue mounted tool box for my Big Tex 60pi. | How large of a toolbox are you looking for? These toolboxes are not custom fitted, so there are going to be a lot of options as far as height, depth and cubic...
i am looking for a metal box that measure 16 to 24 in long by 12 in deep and at lest 12 in tall. | The closest box we have to the measurements you are looking for is DeeZee box, # UB1416-24. It is 24 inches long, 14 inches tall, and 16 inches...
A-Frame Trailer-Mount Tool Boxes
Hello, I am looking for a tongue toolbox for my PJ trailer: 36-48inch wide x 12inch deep x 12-16inch tall. | We have several styles of trailer-mount tool box shown on the linked page. These include products from Dee Zee, MaxxTow and RC Manufacturing...
Availability Of A-Frame Trailer Tongue Tool Box For A-Frame Trailer
I’m looking for a toolbox for my trailer, a frame, what ions do you have and what price range? | There are quite a few options when it comes to tool boxes for an A-frame trailer, and it will come down to how much room you have to work with,...
Should Stainless Steel Or Galvanized Bolt Be Used To Mount Trailer Tongue Tool Box In Coastal Area?
I want to mount a trailer tongue box yet to be purchased to my steel tailer frame. I was thinking stainless steel u-bolts I understand galvanic action and I can isolate the different metals with nylon spacers as I live on the Florida coast...
Trailer Toolbox Recommendation for Storing Jack and Wheel Wrench
I need a way to safely and securely attach either a tool box or some other device to a 6 x 15 HandH Trailer I have to carry a handyman jack and some tools. I hate to be on the road without a jack and a wheel wrench. As of now, I just lay...
How To Mount RC Manufacturing Trailer Tongue Tool Box 350970 Without Drilling Holes In Frame
I have a HandH aluminum trailer with square tube tongue rails. How do I mount to the rails since I dont want to drill all the way through the tubes? | Since you are not wanting to drill all the way through the aluminum frame on your H and H...
Is A-Frame Trailer Tongue Toolbox Made in the USA?
What is the country of origin, and how good is the weather stripping on the lid? | The A-Frame Trailer Tongue Toolbox # 313-TM362016M is made right here in the United States of America, as you can tell by the photo of the cutout of the bottom...
Recommended 15 inch Tall A-Frame Cargo Box
I am looking for a a frame toolbox for my Suretrac Utility Trailer. My Dimensions are front long 25”, back long 41”, and wide 15”. | Although none of the trailer tongue toolboxes we offer precisely meets the measurements you provided, we have...
Where is The Best Place To Install An Underbody Tool Box On a Gooseneck Trailer?
Have a 32 foot flatbed trailer gooseneck that is 36 inches off the ground. THe crest of the hill and the bottom of the hill Distance detweenthe ground and box get smaller depending where you put it. Where would be the best placement underbody?...
Recommended Underbody Storage Toolbox Measuring 30x18x18
looking for underbody tool boxes with measurements ranging from LxWxH 30x18x18-24x18x18. Would greatly appreciate if you could connect me with a number to call back to. | The RC Manufacturing Z-Series Underbody Toolbox part # UBT1818-30 which...
Comparing RC Manufacturing and UWS A-Frame Trailer Toolbox
With regards to RC Manufacturing 350970 and UWS UWS04530 aluminum tongue trailer tool boxes, which one is better quality? The RC Manufacturing tool box seems to be heavier and with a thicker grade aluminum. I live in Moncton, New Brunswick Canada. Just...
Filter Your Search
Contact and Help