Trailer Toolbox Recommendation for Storing Jack and Wheel Wrench
Updated 10/06/2015 | Published 10/05/2015 >
Question:
I need a way to safely and securely attach either a tool box or some other device to a 6 x 15 HandH Trailer I have to carry a handyman jack and some tools. I hate to be on the road without a jack and a wheel wrench. As of now, I just lay the jack in the floor of the bed which is not safe/secure. Any ideas? If none, then I may hire a guy to build it or build it myself and sell it to you guys...! Thanks
asked by: Stan G
Helpful Expert Reply:
Your best bet would be an underbody tool box like the part # UB1818-48 if you can find a place to put it on your trailer to allow you to store your jack and wheel wrench. While this is intended to be installed on the underside of your trailer you could also install it elsewhere if you have the room for it. It measures 48" (long) x 18" (tall) x 18" (deep).
Product Page this Question was Asked From
RC Manufacturing Z-Series Truck or Trailer Underbody Tool Box - Steel - 9 Cu Ft - Textured Black
- Underbody Tool Box
- Trailer Underbody Box
- Truck Underbody Tool Box
- 18 Inch Tall
- Steel
- Medium Capacity
- 18 Inch Wide
- 48 Inch Long
- Black
- RC Manufacturing
more information >
Continue Researching
- Q&A: Mounting Brackets for Fulton Trailer Fenders # F008592
- Shop: Single Axle Trailer Fender - Diamond Plate Aluminum - 8" Wheels - Qty 1
- Shop: Galvanized Steel, L-Shaped, Bolt-On Bracket for Plastic, Single-Axle Trailer Fender PF775X21W
- Shop: Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1
- Shop: Greystone RV Range Hood w/ Sloped Front - 12V - 13" Wide - Black
- Shop: Optronics License Plate Light w/ Mounting Bracket - Incandescent - Gray Housing - Clear Lens
- Q&A: Opening Size of RC Manufacturing Z-Series Truck or Trailer Underbody Tool Box - Steel - 9 Cu Ft
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: Replacement Grease Seal for GS-1250DL
- Q&A: What Gauge Wire Is Required On a 7-Way Connector
- Q&A: Replacement Spring-Loaded Plunger Pin for Bulldog Electric Landing Gear # BD500170
- Article: Trailer Lighting Requirements
- Q&A: Replacement Trailer Jack For Triton Seadoo Trailer
- Article: How to Measure a Trailer Axle
- Article: It's Fun Until It Breaks: Synthetic or Steel Winch Rope
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Trailer Wiring Diagrams
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs

