!Cherokee Alpha Wolf Travel Trailer  x   >   Marquis Motorhome  x   >   Outlander  x   >   Mitsubishi  x   >  

My 2015 Outlander appears to have factory package for wiring trailer. However, I cant find wiring part that says with tow package. I saw one of your install videos for a 2016 Outlander with tow package, but that part says not compatible with...

I have a 2020 Mitsubishi outlander and want to get roof rails Front to back that are chrome and not the flush ones for the roof | I have a few recommendations but all of the roof rack systems for your 2020 Mitsubishi Outlander will run across...

Just wondering if this cargo carrier will fold up without hitting the back of a 2007 Mitsubishi Outlander LS that will have a Curt hitch installed. I plan to buy the hitch from you, but dont know if I should/can ask for the folding cargo carrier...

Hi, have a curt weight distribution hitch installed. No problem. I needed to raise the ball 2 inches higher, so i purchased a curt ball with 2 inch longer shank with proper ratings. I wanted to install a friction sway bar but don't know if...

This kit lets me wire my PHEV Outlander for a flat 4 plug, good first step. My trailer is fitted with a 7 conductor plug, brakes, 12v and reverse lights not currently fitted, future upgrade How do I use this kit with the 7 wire plug? Is...

Hi. I have a 2008 mitsubishi outlander. The rear is sagging even without load. Will this product lift the rear at least an inch? A mechanic also told me that this would add pressure and might break the spring. Can you enlighten me on this. Thank...

I was looking into this item for my 2007 Mitsubishi Outlander LS with the 3.0 V6 - it has a temp gauge on it Im not sure if I need another tranny cooler or not, you see, so I thought maybe Id install this first to see how hot the tranny fluid...

Hi, I have a 1991 Bonair BA700 tent trailer. Id like to do the axle flipfoot on this trailer - do you know which kit I would need and could you provide me a part # or link to any and all hardware I would require to do this? thanks, | The kit...

hitch for 2017 outlandermitsubishi SEL MIGHT NOT FIT???Item # C13079 | The Curt Class III Trailer Hitch, # C13079, is a confirmed fit the 2017 Mitsubishi Outlander Sport including the SEL trim package. If your vehicle is not the Sport model...

Will the Yakima backswing work with my Kuat 2” Transfer 1? My rack weighs 25 lbs so it’s very light and I carry only 1 bike with me. | The Yakima BackSwing # Y02483 will work with any bike rack that has a 2 inch shank. Unfortunately, it cannot...

Hi: I wonder if the below item would fit my 2014 Mitsubishi Outlander ES, it requires a fixed point roof racks. Last time I tried another brand it didnt fit, as it appears there is no thread in the fixed points hole. Please advise. Thanks DS1375B...

Looking for a hitch for my 2006 Mitsubishi Outlander that can tow utv I dont know the weight of the utv yet havent I dont understand the 300 pounds tongue weight is there a stronger tongue weight in case I do pass the required weight at the...

306-X7379. will this fit the PHEV models? | It will! You do have the correct fit for your 2018 Mitsubishi Outlander PHEV from EcoHitch: - EcoHitch Stealth Trailer Hitch Receiver # 306-X7379 |

What about the electric brake for the trailer ? Is that another kit? | We have everything you need to install a brake controller in your 2013 Mitsubishi Outlander but you will need to start with the part # 118518 that you referenced. From there...

I went to install the 13581 hitch on my Outlander. The 10MM bolts supplied with the hitch dont seem to fit the threaded nuts in the frame. There is some rust on the threads but I cant even get the bolt started. Have you had any one else question...

I want to buy a hitch trailer class 3 with electrical cables for a 2018 Mitsubishi Outlander SEL 2.4L | We can help you with a hitch and trailer wiring harness for your 2018 Mitsubishi Outlander. I suggest the 2-inch Class III Curt hitch #...

Guys I want to install an additional tranny oil cooler on my outlander, but i dont know where to plug the cooler hoses on the tranny. I found some photo showing that hot fluid comes out from the drain plug on the tranny pan, but refill plug...

I notice that the blue bags are much shorter than the springs are when fully extended as on a lift. Theyre close from what I can tell to the length of the spring under load, though Ill need to get a ruler out to measure both. Is this correct?...

The vehicle is a 2018 Mitsubishi Outlander with flush roof rails. For this vehicle your site offers the Thule Aeroblade Edge in two different packages, one with parts TH7602-TH7603, and a different package with those parts plus the fit kit...

Can you tell me if this will fit a 2009 Outlander? | I spoke with my contact at Firestone. He stated that they have just recently extended the model years the Firestone Coil-Rite Air Helper Springs - Rear Kit, # F4182, will fit. It will now...

Is there enough room to sleep Does it fit an 2011 outlander gt with flip up rear seats | The AirBedz XUV Air Mattress with Built-In Rechargeable Battery Air Pump part # 341031 fits all models of the Mitsubishi Outlander. The dimensions of the...

What hitch should I get for my 2020 Mitsubishi Outlander? | For your 2020 Mitsubishi Outlander I recommend the Curt hitch part # C13163 as it has plenty of towing capacity and installs relatively easy. I attached an install video for you to...

Curt advertises model #13398 as a hitch that fits the Outlander PHEV however, in a recent response you stated there was no suitable hitch for the PHEV? Will this model work? | The Curt Class III Round Tube Receiver Hitch # C13398 referenced...

Hello, Im interested in crossbars for my 2022 mitsubishi outlander ES, without roof rails. The product description is this: Thule AeroBlade Edge Roof Rack - Fixed Mounting Points/Flush, Factory Side Rails - Aluminum - Black Fit Kit for Thule...