Where Is The Power Source for External Tank Sensors
There is no direct discussion for hooking your system to an electrical power source. Am I to assume that two wires must be run ro one of my chassis batteries? | The SeeLeveL RV Holding Tank Monitoring System, # SE39VR operates from a 12 VDC...
Does the SeeLeveL RV Holding Tank Monitor - Fresh, Gray, Black, Galley Have Audible Alerts
Can the Seelevel Model 709-4 sound an audible alert when a tank is full? | The SeeLeveL RV Holding Tank Monitor part # SE84VR does not have any sort of built-in speakers so it will only display visual alerts. Therefore, you'll need to press...
Recommended Sensor System For Determining Water Tank Levels
Looking for a meter to tell how much water we have consumed in our RV. We are dry camping and need to conserve the water in our fresh tank. The sensors in the RV are simply 3 lights. I would love to have something that shows gallons consumed,...
Are SeeLevel Sensors 710-AR & 710-ES2 Available
Do you carry the 701AR and 701ES2 sensors | We have the 710-AR and 710-ES2 SeeLevel sensors, though I was unable to find any 701AR or 701ES2. If you were referring to the 710-AR and 710-ES2 you would need the following: - 710-AR: SeeLeveL Sensor...
Replacing Older Winnebago RV Tank Monitor Display with SeeLeveL RV Holding Tank Monitor
Will the SE74VR replace an older monitor that is in a 1998 Winnebago RV? The monitor that is in it is showing inconsistant and wrong levels. Thanks for you help. | Yes, the SeeLeveL RV Holding Tank Monitor for fresh, gray, black - water pump...
Does the SeeLeveL RV Holding Tank Monitor SE84VR Come With the Sensors
Does the SE84VR model include the sensors for all four tanks? | No, the SeeLeveL RV Holding Tank Monitor # SE84VR does not include the sensors. The sensors are sold separately. - SeeLeveL Sensor for RV Holding Tank Monitor # SE78VR (12") -...
Availability of SeeLevel Brand Sensors and Monitors
Does etrailer install the SeeLevel products? I have a 2017 Renegade Valencia 35MB. | Yes we do carry the SeeLevel brand of tank sensors and monitors. If you check out the link I attached to this page you'll see all of the options we offer. |
Can SeeLevel Tank Sensors Be Mounted On Water Tanks Under A Van
Im looking at the Seelevel sensor mounting on my water tank. Is this suitable for a tank mounted underneath the van? Thanks. SeeLeveL SE27VR | Yes, the SeeLeveL Sensors # SE27VR can be used on a tank mounted under a van. You'll just want to...
Will SeeLevel Sensors Work With OEM Water Tank Sensor Monitors
The sea level sensor would it work with a standard monitor that has readouts by the 1/3 or do I need to add or replace my present monitor? Thank you | The SeeLevel systems will require you to replace your current monitor in order to properly...
Which SeeLevel Holding Tank System For 5th Wheel
I am looking to put in the replacement holding tank sensor system. I have a a 2022 Alliance RV Paradigm 5th wheel 35 ft. Which sensor system should I get? | This really depends on if your 2022 Alliance Paradigm has an RV-C, multiplex wiring...
Recommended Replacement RV Fresh Water Tank for Thor Tahoe Transport Travel Trailer
Looking for 2ea potable water tanks. 60 length x 36 across x 6 depth. With sensors installed. 03 25 Tahoe Toy hauler by Thor | The closest match we have for what you're looking for is the Valterra RV Water Tank part # R8060 which measures 60"...
Can the SeeLevel Sensor Be Used With a Simraine Pico Tank Monitor
Can SeeLevel sensor be used th Simarine Pico tank monitor | Mike, unfortunately not. The SeeLeveL Sensor for RV Holding Tank Monitor # SE78VR is designed to be used with the SeeLeveL RV Holding Tank Monitor # SE34VR, so it's not going to work...
Is There a SeeLevel Monitor For Fresh Water Only w/ Pump Switch & Battery Monitoring
Do you sell a SeeLevel monitor that is only Fresh Water, Battery Status and Pump Switch? We have a Pop-Up Tent Trailer and there is no Gray or Black tank. However, we would like to monitor our Fresh Water Level...Battery Status and Pump...
Is There a SeeLeveL RV Holding Tank Monitor for Fresh, Galley, Bath and Black Tanks
See level monitor kit. I have a cedar creek with fresh, galley, bath, and black tanks. Do they make a kit for monitoring 4 tanks, that are labeled on the monitor correctly for this? Thanks | We do have the SeeLeveL RV Holding Tank Monitor...
Can SeeLevel Sensor for RV Holding Tank Work on Boat
Can this sensor be used in fresh and black water on marine/boats? Bayliner? | Yes, the SeeLevel part # SE78VR can be used on the water tanks of a boat as well. |
Do SeeLevel Tank Monitor Screens Stay On Always
Hey, does this show the percentage always, or does the screen go black when you arent using it? Constantly trying to reduce lights in the van, so Id prefer it wasnt always lit | The SeeLeveL RV Holding Tank Monitor # SE94VR shuts off after just...
SeeLeveL RV Holding Tank Monitoring System & Display
The pump switch is just another place to turn on/off the water pump. Or is there another reason for it? | It is a 3-way switch. The SeeLeveL RV Holding Tank Monitoring System, # SE39VR includes a panel that incorporates readings for sensors...
What is Purpose of Pump Switch of SeeLevL Monitoring System SE39VR
The pump switch is just another place to turn on/off the water pump. Or is there another reason for it? | Correct, the pump switch of the SeeLeveL RV Holding Tank Monitoring System # SE39VR provides an additional way to activate the water pump. |
Voltage Used by the SeeLevel Sensors # SE27VR
What is the output voltage on the sensors? | The SeeLevel Sensor part # SE27VR that you referenced runs on 12 volts. |
Is There Version of SeeLevel that Could be Used with Just Freshwater Tank
Does sea level make a monitor that is for freshwater tank only, do not need water pump switch or to monitor gray or black tanks | Hey Kent, so we don't have a version of the SeeLevel that has just a freshwater tank monitor but you could use...
SeeLeveL Monitor and Sensors For a 2020 Jayco 310RLTS With Multiple Grey Tanks
I have a Jayco 2020 310RLTS 5th wheel with 2 greys, 1 black and 1 fresh holding tanks. I want to change to the externally mounted sensors. I was told all I have to do was cut the existing wires from the old sensors leading into the tanks,...
Do You Cut Tabs on Both Stacked SeeLevel Sensors SE88VR
SEELEVEL SENSORS 710-AR When stacking the sensors do you have to cut the tab on both sensors or just one? | Per SeeLevel, for a stacked configuration of the SeeLeveL Sensor for RV Holding Tank Monitor - 9" Long # SE88VR you just cut the top...
What Is The Wiring Diagram For The SeeLevel Monitor # SE94VR
I am trying to connect this and have no wiring diagram. I have created my own of what I did, and it’s not working. Do you have a wiring diagram for this? I bought it from etrailer a couple of years ago and have never been able to get it to work....
How Do the SeeLeveL RV Holding Tank Monitoring Sensors Work for Propane Tanks
RE: SeaLevel Systems The various units describe the monitor strip for holding tanks, but dont say how the Propane tanks are monitored. Where does the monitor panel get propane level info? My trailer does not currently measure propane levels....
Filter Your Search
Contact and Help