Replacing Older Winnebago RV Tank Monitor Display with SeeLeveL RV Holding Tank Monitor
Updated 06/17/2025 | Published 01/01/2022
Products Featured in This Question
Question:
Will the SE74VR replace an older monitor that is in a 1998 Winnebago RV? The monitor that is in it is showing inconsistant and wrong levels. Thanks for you help.
asked by: BRADY B
Helpful Expert Reply:
Yes, the SeeLeveL RV Holding Tank Monitor for fresh, gray, black - water pump and heater switch, # SE74VR is designed specifically to be a replacement for older tank monitoring systems. The SeeLeveL # SE74VR uses sensors that are sold separately for single-digit accuracy. The SeeLeveL sensors are mounted on the outside of the tanks, this means they are easy to install, won’t give false readings due to debris, and are easy to maintain. The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height. This makes it accurate in single-digit increments. If you are replacing an older monitoring system with serviceable wiring, you can simply splice into that wire, no need to replace the wiring too.
Use the SeeLeveL Sensor for RV Holding Tank Monitor - 6" Long, # SE77VR for 4-1/2" - 7" tall tanks.
Use the SeeLeveL Sensor for RV Holding Tank Monitor - 12" Long, # SE87VR for 5" - 13" tall tanks and you can stack additional sensors to accommodate tanks up to 25" tall.
Use the SeeLeveL Sensor for RV Holding Tank Monitor - 16" Long, # SE27VR for 7" - 17" tall tanks and you can stack additional sensors to accommodate tanks up to 34" tall.
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
SeeLeveL RV Holding Tank Monitor - Fresh, Gray, Black - Water Pump and Heater Switch
- Smart RV
- Monitoring System
- Water Pumps
- Water Tanks
- Digital Display
- Monitors Only
- SeeLeveL
more information >
Featured Help Information
Instructions
Continue Researching
- Video: Review of Victron RV Power Inverter - Pure Sine Wave Inverter Charger - VN69ZR
- Shop: Victron MultiPlus Pure Sine Wave Inverter Charger - 2,000 Watts - 50 Amps - 12V - UL Listed
- Shop: Victron MultiPlus Pure Sine Wave Inverter Charger - 1,600 Watts - 50 Amps - 24V - UL Listed
- Q&A: Best Way to Monitor Your RV House Battery Over WiFi
- Search Results: cerbo gx
- Q&A: Victron Smart Dongle vs Cerbo GX Explained for MultiPlus-II Remote Control
- Shop: Victron MultiPlus-II Inverter Charger with 2 AC Outputs - 2,400 Watts - 50 Amps - 12V - UL Listed
- Shop: Victron Cerbo GX Communication Center - Bluetooth - 12V
- Shop: SeeLeveL Sensor for RV Holding Tank Monitor - 16" Long
- Shop: SeeLeveL RV Holding Tank Monitor - Fresh, Black - Water Pump Switch
- Shop: SeeLeveL RV Holding Tank Monitor - Fresh, Gray, Black - Multiplex Compatible - Water Pump Switch
- Video: Ultimate Overview of the Curt RV Bumper Hitch
- Q&A: Replacement Slide Control Knob For 2017 Airstream Flying Cloud Dimmer Switch
- Search Results: wfco
- Q&A: Installation of Trailer Hitch on 2018 Jeep Wrangler JL with Additional Bracket at Frame
- Video: Review of TowSmart Trailer Hitch - Custom Fit Hitch - TS29VR
- Q&A: Can SeeLevel Tank Sensors Be Mounted On Water Tanks Under A Van
- Video: Review of SeeLeveL Smart RV - Monitoring System - SE27VR
- Shop: RV Interior Lighting
- Shop: RV Mattress
- Q&A: Troubleshooting A Slide Out Box That Stops Before Fully Sealing Closed
- Q&A: Replacement RV Slide Out Gear Pack for 2015 Nomad Travel Trailer
- Video: Replacement Hinge for Thomas Payne RV Jackknife Sofa Feature Review
- Search Results: flat tow wiring kit
- Search Results: fireplace
- Shop: Vehicle Lights
- Shop: Vehicle Tow Bar Brake System
- Shop: Trailer Hitch
- Search Results: rv mudflaps
Susan B.
6/17/2025
Can this monitor be hooked up to the RV sensors that already exist in the motorhome. In other words is it necessary to replace all of the sensors and does the seelevel monitor SE74VR come prewired with molex plugs?