Result:

It appears that this Pod DOES NOT include the swing away receiver mount. Do you offer it separately? part 10188? | Hey B, No, the Rola swing away cargo carrier has been discontinued for a bunch of years now, and there are none of the receiver...

What is the inside cubic feet or inches of this cargo holder? | The Replacement Pod for Rola Enclosed Cargo Carriers # 10188 for the Rola Swinging Enclosed Cargo Carrier, can hold a total of 13.5 cubic feet of gear. has an internal dimensions...

Hi. I have a Graber Outback 4 bike hitch rack. Women’s bikes don’t fit great. Also straps broken. Do you have any replacement parts? I can use for this rack? | Hello Scott. We do offer a few compatible replacement parts for the Graber Outback...

I have 2026 F350 DRW l pull a 5th wheel will this effect the on board scale system | Hello John, thanks for reaching out, and congrats on the new truck. Yes, the Timbren Suspension Enhancement System # TFR350SDJ will affect the onboard scales...

My tekonsha p3 will not power on. On the harness that plugs into the back of it I have +12V on the red wire and Ground on the Black wire. Should the +12 and Ground be reversed? | It sounds like you are hardwiring the Tekonsha Prodigy P3 Trailer...

2025 Grand Design Imagine XLS TT: Need new entry door keeper. There are two that look what we have: RD38ZR and 37210625. One has measurements, the other does not. Whats the difference, other than price? Not sure which one to order. | Thanks...

Hello, I see this switch has what i would call spring tabs, so will it fit a cut out of .975 wide x 1.65inch tall? I am trying to find a replacement switch for my awning. My current switch looks identical to this one, but not sure it will fit...

I want to replace baggage door handle 12055-37 on 1999 Southwind Fleetwood F53 motorhome and latch RD26MR. Can you help me with this? Thanks Larry | Hey Larry, yes the RV Designer Door Latch part # RD26MR will work great to replace the 12055-37...

What size is the hole it needs? this will be a new install for me. | Hi Keith, The RV Designer Round Low-Profile Cable Hatch part # RD46GR fits into a cutout that is 3 1/2" in diameter. The overall flange dimensions are 4.6" x 2.6". You may...

Hello...I am looking for a Trailer Tail-light side lens cover...all I need is the red lens cover because I have one that is missing... the other one that I measured is 2 1/4inch wide and 3inch tall...Just so that you know kind of what I am talking...

Hello, I’m looking to replace my 1996 Casita tail lights, I’ve been searching on your site and can’t seem to find the correct size lights that would match the mounting holes. Here are the dimensions, housing light L 8 9/16” x W 4 5/8“ and mounting...

Once landing on the SR1003 link from Google search, it says it cannot confirm it fits my naked rails 2018 CRV. Does this fit? Thanks | We have great roof racks that fit your 2018/2019 Honda CR-V, but the Sportrack is not listed as a fit....

We have a 1978 starmate and the door latch no longer stays latched. We have tried the JR replacement but the striker is too short. It’s not long enough to latch onto the door frame. How does the striker plate work? | Hey Angelique, I attached...

What size ball end does this strut fit? | Hey Myrl, the RV Designers Gas Strut part # RD82RR that you referenced is designed to fit 10 mm ball ends. Where are you wanting to install this strut? |

Hello, I am looking for some standard on/off rocker swtiches for my 2025 keystone cougar that will fit in the factory cutouts on the control panel. These would be the same size switches as the factory awning and slide out controls. The cutout...

Is Part Number: RD86VR LED or incadescent? | Hi David, I reached out to RV Designer directly and they informed me that the RV Designer Indicator Light part # RD86VR is in fact an incandescent light. Are you looking to replace your indicator...

Thor 2016 Freedom Elite. Side entry door. What material is the door latch itself made of? Is it cheap pot metal or steel? I ask because all replacements I have ordered, break inside of three months. Thanks. | Hey Dave. The T5079 RV Designer...

I just want to make sure Im looking at the right products for my old car...2003 toyota avalon SLE. I have 2 kayaks I want to be able to haul and I have no roof racks...just want to confirm that there cross bars that can actually be installed...

Can you tell me the spacing of the screw holes on this door catch? The one Im replacing has a spacing of about 1 1/4 inches. Ill post a photo below. Thanks! | Hello Ken, Looks like we have a winner! I couldn't find that measurement anywhere...

How to unmary from my truck | I talked with the vendor about unmarrying the Edge CTS3 Tuner. You will need to go into the tune menu and look for 'return to stock' or 'backup'. This will walk you through the necessary steps to return your truck...

Does this rack include any kind of end stops for the top horizontal bars? | Yes, the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 does come with end caps for the horizontal crossbars. |

I would like to use gas struts to raise my bed so that I can get into the storage area under the bed. What do I need to do to measure to decide what length I would need? Also, I would need a latch that would hold the gas struts down until released?...

What is the diameter of the slider the male part that fits into the track?? | Hi Michael, The RV Designer Sew-In Carrier part # RD48QR has the following dimensions: -Head is 3/16" in diameter -Post under the head of the carrier is 1/8"...

I have a 2007 Toyota Tundra SR5 with a five and a half foot bed and it has the track system for tie downs on the bed rails will this fit my truck | We do have some ladder racks that will work with the track system in your 2007 Toyota Tundra...